dot12-if-mib

很不错java的SNMP应用例子

                had an invalid packet marker added to the end of
                the frame."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.5.2.1,
                aIPMFramesReceived."
        ::= { dot12StatEntry 5 }

    dot12InOversizeFrameErrors OBJECT-TYPE
        SYNTAX     Counter32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "This object is a count of oversize frames
                received on this interface.  This counter is
                incremented by one for each frame received on
                this interface whose OctetCount is larger than
                the maximum legal frame size.  The frame size
                which causes this counter to increment is
                dependent on the current framing type."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.5.2.1,
                aOversizeFramesReceived."
        ::= { dot12StatEntry 6 }

    dot12InDataErrors OBJECT-TYPE
        SYNTAX     Counter32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "This object is a count of errored frames
                received on this interface.  This counter is
                incremented by one for each frame received on
                this interface with any of the following errors:
                bad FCS (with no IPM), PMI errors (excluding
                frames with an IPM as the only PMI error),
                undersize, bad start of frame delimiter, or bad
                end of packet marker.  Does not include frames
                counted by dot12InIPMErrors,
                dot12InNullAddressedFrames, or
                dot12InOversizeFrameErrors.

                This counter indicates problems with the cable
                directly attached to this interface, while
                dot12InIPMErrors indicates problems with remote
                cables."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.5.2.1,
                aDataErrorFramesReceived."
        ::= { dot12StatEntry 7 }

    dot12InNullAddressedFrames OBJECT-TYPE
        SYNTAX     Counter32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "This object is a count of null addressed frames
                received on this interface.  This counter is
                incremented by one for each frame received on
                this interface with a destination MAC address
                consisting of all zero bits.  Both void and
                training frames are included in this counter.

                Note that since this station would normally not
                receive null addressed frames, this counter is
                only incremented when this station is operating
                in promiscuous mode or in training."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.5.2.1,
                aNullAddressedFramesReceived."
        ::= { dot12StatEntry 8 }

    dot12OutHighPriorityFrames OBJECT-TYPE
        SYNTAX     Counter32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "This counter is incremented by one for each high
                priority frame successfully transmitted out this
                interface."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.5.2.1,
                aHighPriorityFramesTransmitted."
        ::= { dot12StatEntry 9 }

    dot12OutHighPriorityOctets OBJECT-TYPE
        SYNTAX     Counter32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "This counter is incremented by OctetCount for
                each frame counted by dot12OutHighPriorityFrames.

                Note that this counter will roll over very
                quickly.  It is provided for backward
                compatibility for Network Management protocols
                that do not support 64 bit counters (e.g. SNMP
                version 1)."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.5.2.1,
                aHighPriorityOctetsTransmitted."
        ::= { dot12StatEntry 10 }

    dot12TransitionIntoTrainings OBJECT-TYPE
        SYNTAX     Counter32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "This object is a count of the number of times
                this interface has entered the training state.
                This counter is incremented by one each time
                dot12Status transitions to 'linkFailure' from any
                state other than 'opening' or 'openFailure'."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.5.2.1,
                aTransitionsIntoTraining."
        ::= { dot12StatEntry 11 }

    dot12HCInHighPriorityOctets OBJECT-TYPE
        SYNTAX     Counter64
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "This object is a count of the number of octets
                contained in high priority frames that have been
                received on this interface. This counter is
                incremented by OctetCount for each frame received
                on this interface which is counted by
                dot12InHighPriorityFrames.

                This counter is a 64 bit version of
                dot12InHighPriorityOctets.  It should be used by
                Network Management protocols which support 64 bit
                counters (e.g. SNMPv2)."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.5.2.1,
                aHighPriorityOctetsReceived."
        ::= { dot12StatEntry 12 }

    dot12HCInNormPriorityOctets OBJECT-TYPE
        SYNTAX     Counter64
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "This object is a count of the number of octets
                contained in normal priority frames that have
                been received on this interface. This counter is
                incremented by OctetCount for each frame received
                on this interface which is counted by
                dot12InNormPriorityFrames.

                This counter is a 64 bit version of
                dot12InNormPriorityOctets.  It should be used by
                Network Management protocols which support 64 bit
                counters (e.g. SNMPv2)."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.5.2.1,
                aNormalPriorityOctetsReceived."
        ::= { dot12StatEntry 13 }

    dot12HCOutHighPriorityOctets OBJECT-TYPE
        SYNTAX     Counter64
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "This counter is incremented by OctetCount for
                each frame counted by dot12OutHighPriorityFrames.

                This counter is a 64 bit version of
                dot12OutHighPriorityOctets.  It should be used by
                Network Management protocols which support 64 bit
                counters (e.g. SNMPv2)."
        REFERENCE
                "IEEE Standard 802.12-1995, 13.2.5.2.1,
                aHighPriorityOctetsTransmitted."
       ::= { dot12StatEntry 14 }

    -- conformance information

    dot12Conformance  OBJECT IDENTIFIER ::= { dot12MIB 2 }

    dot12Compliances  OBJECT IDENTIFIER ::= { dot12Conformance 1 }
    dot12Groups       OBJECT IDENTIFIER ::= { dot12Conformance 2 }

    -- compliance statements

    dot12Compliance MODULE-COMPLIANCE
        STATUS     current
        DESCRIPTION
                   "The compliance statement for managed network
                   entities that have 802.12 interfaces."

        MODULE  -- this module
            MANDATORY-GROUPS { dot12ConfigGroup, dot12StatsGroup }

            OBJECT       dot12DesiredFramingType
            MIN-ACCESS   read-only
            DESCRIPTION
                   "Write access to this object is not required."

            OBJECT       dot12DesiredPromiscStatus
            MIN-ACCESS   read-only
            DESCRIPTION
                   "Write access to this object is not required."

            OBJECT       dot12Commands
            MIN-ACCESS   read-only
            DESCRIPTION
                   "Write access to this object is not required."

            OBJECT       dot12ControlMode
            MIN-ACCESS   read-only
            DESCRIPTION
                   "Write access to this object is not required."
        ::= { dot12Compliances 1 }

    -- units of conformance

    dot12ConfigGroup OBJECT-GROUP
        OBJECTS    { dot12DesiredFramingType,
                     dot12FramingCapability,
                     dot12DesiredPromiscStatus,
                     dot12TrainingVersion,
                     dot12LastTrainingConfig,
                     dot12Commands, dot12Status,
                     dot12CurrentFramingType,
                     dot12ControlMode }
        STATUS     current
        DESCRIPTION
                "A collection of objects for managing the status
                and configuration of IEEE 802.12 interfaces."
        ::= { dot12Groups 1 }

    dot12StatsGroup OBJECT-GROUP
        OBJECTS    { dot12InHighPriorityFrames,
                     dot12InHighPriorityOctets,
                     dot12InNormPriorityFrames,
                     dot12InNormPriorityOctets,
                     dot12InIPMErrors,
                     dot12InOversizeFrameErrors,
                     dot12InDataErrors,
                     dot12InNullAddressedFrames,
                     dot12OutHighPriorityFrames,
                     dot12OutHighPriorityOctets,
                     dot12TransitionIntoTrainings,
                     dot12HCInHighPriorityOctets,
                     dot12HCInNormPriorityOctets,
                     dot12HCOutHighPriorityOctets }
        STATUS     current
        DESCRIPTION
                "A collection of objects providing statistics for
                IEEE 802.12 interfaces."
        ::= { dot12Groups 2 }

END