rfc1253-mib

很不错java的SNMP应用例子

ospfIfMetricEntry OBJECT-TYPE
    SYNTAX   OspfIfMetricEntry
    ACCESS   not-accessible
    STATUS   mandatory
    DESCRIPTION
       "A particular TOS metric for a non-virtual interface
       identified by the interface index."
    REFERENCE
       "OSPF Version 2, Appendix C.3  Router interface
       parameters"
    INDEX { ospfIfMetricIpAddress,
            ospfIfMetricAddressLessIf,
            ospfIfMetricTOS }
    ::= { ospfIfMetricTable 1 }

OspfIfMetricEntry ::=
    SEQUENCE {
        ospfIfMetricIpAddress
            IpAddress,
        ospfIfMetricAddressLessIf
            INTEGER,
        ospfIfMetricTOS
            TOSType,
        ospfIfMetricMetric
            Metric,
        ospfIfMetricStatus
            Validation
    }

ospfIfMetricIpAddress OBJECT-TYPE
    SYNTAX   IpAddress
    ACCESS   read-write
    STATUS   mandatory
    DESCRIPTION
       "The IP address of this OSPF interface.  On row
       creation, this can be derived from the instance."
    ::= { ospfIfMetricEntry 1 }

ospfIfMetricAddressLessIf OBJECT-TYPE
    SYNTAX   INTEGER
    ACCESS   read-write
    STATUS   mandatory
    DESCRIPTION
       "For the purpose of easing the instancing of addressed
       and addressless interfaces; This variable takes the
       value 0 on interfaces with IP Addresses, and the value
       of ifIndex for interfaces having no IP Address.  On row
       creation, this can be derived from the instance."
    ::= { ospfIfMetricEntry 2 }

ospfIfMetricTOS OBJECT-TYPE
    SYNTAX   TOSType
    ACCESS   read-write
    STATUS   mandatory
    DESCRIPTION
       "The type of service metric being referenced.  On row
       creation, this can be derived from the instance."
    ::= { ospfIfMetricEntry 3 }

ospfIfMetricMetric OBJECT-TYPE
    SYNTAX   Metric
    ACCESS   read-write
    STATUS   mandatory
    DESCRIPTION
       "The metric of using this type of service on this
       interface.  The default value of the TOS 0 Metric is
       10^8 / ifSpeed.

       The value FFFF is distinguished to mean 'no route via
       this TOS'."
    ::= { ospfIfMetricEntry 4 }

ospfIfMetricStatus OBJECT-TYPE
    SYNTAX   Validation
    ACCESS   read-write
    STATUS   mandatory
    DESCRIPTION
       "This variable displays the validity or invalidity of
       the entry.  Setting it to 'invalid' has the effect of
       rendering it inoperative.  The internal effect (row
       removal) is implementation dependent."
    DEFVAL   { valid }
    ::= { ospfIfMetricEntry 5 }


--  OSPF Virtual Interface Table

--      The Virtual Interface Table describes the virtual
--      links that the OSPF Process is configured to
--      carry on.

ospfVirtIfTable OBJECT-TYPE
    SYNTAX   SEQUENCE OF OspfVirtIfEntry
    ACCESS   not-accessible
    STATUS   mandatory
    DESCRIPTION
       "Information about this router's virtual interfaces."
    REFERENCE
       "OSPF Version 2, Appendix C.4  Virtual link parameters"
    ::= { ospf 9 }

ospfVirtIfEntry OBJECT-TYPE
    SYNTAX   OspfVirtIfEntry
    ACCESS   not-accessible
    STATUS   mandatory
    DESCRIPTION
       "Information about a single Virtual Interface."
    INDEX { ospfVirtIfAreaID, ospfVirtIfNeighbor }
    ::= { ospfVirtIfTable 1 }

OspfVirtIfEntry ::=
    SEQUENCE {
        ospfVirtIfAreaID
            AreaID,
        ospfVirtIfNeighbor
            RouterID,
        ospfVirtIfTransitDelay
            UpToMaxAge,
        ospfVirtIfRetransInterval
            UpToMaxAge,
        ospfVirtIfHelloInterval
            HelloRange,
        ospfVirtIfRtrDeadInterval
            PositiveInteger,
        ospfVirtIfState
            INTEGER,
        ospfVirtIfEvents
            Counter,
        ospfVirtIfAuthKey
            OCTET STRING,
        ospfVirtIfStatus
            Validation
    }

ospfVirtIfAreaID OBJECT-TYPE
    SYNTAX   AreaID
    ACCESS   read-write
    STATUS   mandatory
    DESCRIPTION
       "The Transit Area that the Virtual Link traverses.  By
       definition, this is not 0.0.0.0"
    ::= { ospfVirtIfEntry 1 }

ospfVirtIfNeighbor OBJECT-TYPE
    SYNTAX   RouterID
    ACCESS   read-write
    STATUS   mandatory
    DESCRIPTION
       "The Router ID of the Virtual Neighbor."
    ::= { ospfVirtIfEntry 2 }

ospfVirtIfTransitDelay OBJECT-TYPE
    SYNTAX   UpToMaxAge
    ACCESS   read-write
    STATUS   mandatory
    DESCRIPTION
       "The estimated number of seconds it takes to transmit a
       link- state update packet over this interface."
    DEFVAL { 1 }
    ::= { ospfVirtIfEntry 3 }

ospfVirtIfRetransInterval OBJECT-TYPE
    SYNTAX   UpToMaxAge
    ACCESS   read-write
    STATUS   mandatory
    DESCRIPTION
       "The number of seconds between link-state advertisement
       retransmissions, for adjacencies belonging to this
       interface.  This value is also used when retransmitting
       database description and link-state request packets.
       This value should be well over the expected round-trip
       time."
    DEFVAL { 5 }
    ::= { ospfVirtIfEntry 4 }

ospfVirtIfHelloInterval OBJECT-TYPE
    SYNTAX   HelloRange
    ACCESS   read-write
    STATUS   mandatory
    DESCRIPTION
       "The length of time, in seconds, between the Hello
       packets that the router sends on the interface.  This
       value must be the same for the virtual neighbor."
    DEFVAL { 10 }
    ::= { ospfVirtIfEntry 5 }

ospfVirtIfRtrDeadInterval OBJECT-TYPE
    SYNTAX   PositiveInteger
    ACCESS   read-write
    STATUS   mandatory
    DESCRIPTION
       "The number of seconds that a router's Hello packets
       have not been seen before it's neighbors declare the
       router down.  This should be some multiple of the Hello
       interval.  This value must be the same for the virtual
       neighbor."
    DEFVAL { 60 }
    ::= { ospfVirtIfEntry 6 }

ospfVirtIfState OBJECT-TYPE
    SYNTAX   INTEGER {
                down (1),            -- these use the same encoding
                pointToPoint (4)     -- as the ospfIfTable
             }
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
       "OSPF virtual interface states."
    DEFVAL   { down }
    ::= { ospfVirtIfEntry 7 }

ospfVirtIfEvents OBJECT-TYPE
    SYNTAX   Counter
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
       "The number of state changes or error events on this
       Virtual Link"
    DEFVAL   { 0 }
    ::= { ospfVirtIfEntry 8 }

ospfVirtIfAuthKey OBJECT-TYPE
    SYNTAX   OCTET STRING
    ACCESS   read-write
    STATUS   mandatory
    DESCRIPTION
       "If Authentication Type is simplePassword, the device
       will left adjust and zero fill to 8 octets.

       When read, ospfVifAuthKey always returns a string of
       length zero."
    REFERENCE
       "OSPF Version 2, Section 9 The Interface Data
       Structure"
    DEFVAL   { '0000000000000000'H }    -- 0.0.0.0.0.0.0.0
    ::= { ospfVirtIfEntry 9 }

ospfVirtIfStatus OBJECT-TYPE
    SYNTAX   Validation
    ACCESS   read-write
    STATUS   mandatory
    DESCRIPTION
       "This variable displays the validity or invalidity of
       the entry.  Setting it to 'invalid' has the effect of
       rendering it inoperative.  The internal effect (row
       removal) is implementation dependent."
    DEFVAL   { valid }
    ::= { ospfVirtIfEntry 10 }


--  OSPF Neighbor Table

--      The OSPF Neighbor Table describes all neighbors in
--      the locality of the subject router.

ospfNbrTable OBJECT-TYPE
    SYNTAX   SEQUENCE OF OspfNbrEntry
    ACCESS   not-accessible
    STATUS   mandatory
    DESCRIPTION
       "A table of non-virtual neighbor information."
    REFERENCE
       "OSPF Version 2, Section 10 The Neighbor Data
       Structure"
    ::= { ospf 10 }

ospfNbrEntry OBJECT-TYPE
    SYNTAX   OspfNbrEntry
    ACCESS   not-accessible
    STATUS   mandatory
    DESCRIPTION
       "The information regarding a single neighbor."
    REFERENCE
       "OSPF Version 2, Section 10 The Neighbor Data
       Structure"
    INDEX { ospfNbrIpAddr, ospfNbrAddressLessIndex }
    ::= { ospfNbrTable 1 }

OspfNbrEntry ::=
    SEQUENCE {
        ospfNbrIpAddr
            IpAddress,
        ospfNbrAddressLessIndex
            InterfaceIndex,
        ospfNbrRtrId
            RouterID,
        ospfNbrOptions
            INTEGER,
        ospfNbrPriority
            DesignatedRouterPriority,
        ospfNbrState
            INTEGER,
        ospfNbrEvents
            Counter,
        ospfNbrLSRetransQLen
            Gauge,
        ospfNBMANbrStatus
            Validation
    }

ospfNbrIpAddr OBJECT-TYPE
    SYNTAX   IpAddress
    ACCESS   read-write
    STATUS   mandatory
    DESCRIPTION
       "The IP address of this neighbor."
    ::= { ospfNbrEntry 1 }

ospfNbrAddressLessIndex OBJECT-TYPE
    SYNTAX   InterfaceIndex
    ACCESS   read-write
    STATUS   mandatory
    DESCRIPTION
       " On an interface having an IP Address, zero.  On
       addressless interfaces, the corresponding value of
       ifIndex in the Internet Standard MIB.  On row creation,
       this can be derived from the instance."
    ::= { ospfNbrEntry 2 }

ospfNbrRtrId OBJECT-TYPE
    SYNTAX   RouterID
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
       "A 32-bit integer (represented as a type IpAddress)
       uniquely identifying the neighboring router in the
       Autonomous System."
    DEFVAL   { '00000000'H }    -- 0.0.0.0
    ::= { ospfNbrEntry 3 }

ospfNbrOptions OBJECT-TYPE
    SYNTAX   INTEGER
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
       "A Bit Mask corresponding to the neighbor's options
       field.

       Bit 0, if set, indicates that the area accepts and
       operates on external information; if zero, it is a stub
       area.

       Bit 1, if set, indicates that the system will operate
       on Type of Service metrics other than TOS 0.  If zero,
       the neighbor will ignore all metrics except the TOS 0
       metric."
    REFERENCE
       "OSPF Version 2, Section 12.1.2 Options"
    DEFVAL { 0 }
    ::= { ospfNbrEntry 4 }

ospfNbrPriority OBJECT-TYPE
    SYNTAX   DesignatedRouterPriority
    ACCESS   read-write
    STATUS   mandatory
    DESCRIPTION
       "The priority of this neighbor in the designated router
       election algorithm.  The value 0 signifies that the
       neighbor is not eligible to become the designated
       router on this particular network."
    DEFVAL { 1 }
    ::= { ospfNbrEntry 5 }

ospfNbrState OBJECT-TYPE
    SYNTAX   INTEGER {
                down (1),
                attempt (2),
                init (3),
                twoWay (4),
                exchangeStart (5),
                exchange (6),
                loading (7),
                full (8)
             }
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
       "The State of the relationship with this Neighbor."
    REFERENCE
       "OSPF Version 2, Section 10.1 Neighbor States"
    DEFVAL   { down }
    ::= { ospfNbrEntry 6 }

ospfNbrEvents OBJECT-TYPE
    SYNTAX   Counter
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
       "The number of times this neighbor relationship has
       changed state, or an error has occurred."
    DEFVAL   { 0 }
    ::= { ospfNbrEntry 7 }

ospfNbrLSRetransQLen OBJECT-TYPE
    SYNTAX   Gauge
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
       "The current length of the retransmission queue."
    DEFVAL   { 0 }
    ::= { ospfNbrEntry 8 }

ospfNBMANbrStatus OBJECT-TYPE
    SYNTAX   Validation
    ACCESS   read-write
    STATUS   mandatory
    DESCRIPTION
       "This variable displays the validity or invalidity of
       the entry.  Setting it to 'invalid' has the effect of
       rendering it inoperative.  The internal effect (row
       removal) is implementation dependent."
    DEFVAL { valid }
    ::= { ospfNbrEntry 9 }


--  OSPF Virtual Neighbor Table

--      This table describes all virtual neighbors.
--      Since Virtual Links are configured in the
--      virtual interface table, this table is read-only.

ospfVirtNbrTable OBJECT-TYPE
    SYNTAX   SEQUENCE OF OspfVirtNbrEntry
    ACCESS   not-accessible
    STATUS   mandatory
    DESCRIPTION
       "A table of virtual neighbor information."
    REFERENCE
       "OSPF Version 2, Section 15  Virtual Links"
    ::= { ospf 11 }

ospfVirtNbrEntry OBJECT-TYPE
    SYNTAX   OspfVirtNbrEntry
    ACCESS   not-accessible
    STATUS   mandatory
    DESCRIPTION
       "Virtual neighbor information."
    INDEX { ospfVirtNbrArea, ospfVirtNbrRtrId }
    ::= { ospfVirtNbrTable 1 }

OspfVirtNbrEntry ::=
    SEQUENCE {
        ospfVirtNbrArea
            AreaID,
        ospfVirtNbrRtrId
            RouterID,
        ospfVirtNbrIpAddr
            IpAddress,
        ospfVirtNbrOptions
            INTEGER,
        ospfVirtNbrState
            INTEGER,
        ospfVirtNbrEvents
            Counter,
        ospfVirtNbrLSRetransQLen
            Gauge
    }

ospfVirtNbrArea OBJECT-TYPE
    SYNTAX   AreaID
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
       "The Transit Area Identifier."
    ::= { ospfVirtNbrEntry 1 }

ospfVirtNbrRtrId OBJECT-TYPE
    SYNTAX   RouterID
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
       "A 32-bit integer uniquely identifying the neighboring
       router in the Autonomous System."
    ::= { ospfVirtNbrEntry 2 }

ospfVirtNbrIpAddr OBJECT-TYPE
    SYNTAX   IpAddress
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
       "The IP address this Virtual Neighbor is using."
    ::= { ospfVirtNbrEntry 3 }

ospfVirtNbrOptions OBJECT-TYPE
    SYNTAX   INTEGER
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
       "A bit map corresponding to the neighbor's options
       field.  Thus, Bit 1, if set, indicates that the
       neighbor supports Type of Service Routing; if zero, no
       metrics other than TOS 0 are in use by the neighbor."
    ::= { ospfVirtNbrEntry 4 }

ospfVirtNbrState OBJECT-TYPE
    SYNTAX   INTEGER {
                down (1),
                attempt (2),
                init (3),
                twoWay (4),
                exchangeStart (5),
                exchange (6),
                loading (7),
                full (8)
             }
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
       "The state of the Virtual Neighbor Relationship."
    ::= { ospfVirtNbrEntry 5 }

ospfVirtNbrEvents OBJECT-TYPE
    SYNTAX   Counter
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
       "The number of times this virtual link has changed its
       state, or an error has occurred."
    ::= { ospfVirtNbrEntry 6 }

ospfVirtNbrLSRetransQLen OBJECT-TYPE
    SYNTAX   Gauge
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
       "The current length of the retransmission queue."
    ::= { ospfVirtNbrEntry 7 }

END