appletalk-mib

很不错java的SNMP应用例子

APPLETALK-MIB DEFINITIONS ::= BEGIN

IMPORTS
    Counter, IpAddress, TimeTicks
        FROM RFC1155-SMI
    DisplayString, mib-2
        FROM RFC1213-MIB
    OBJECT-TYPE
        FROM RFC-1212;

--  This MIB module uses the extended OBJECT-TYPE macro as
--  defined in RFC-1212.

--  The following reference is used in this MIB:
--  [Inside AppleTalk]
--  This refers to Gursharan S. Sidhu, Richard F. Andrews, and
--  Alan B. Oppenheimer, Inside AppleTalk, Second Edition,
--  Addison Wesley, (1990).



--  AppleTalk MIB

    appletalk    OBJECT IDENTIFIER ::= { mib-2 13 }


        ATNetworkNumber ::=         -- 2 octets of net number
                                    -- in network byte order
                OCTET STRING (SIZE (2))

        DdpNodeAddress ::=          -- 2 octets of net number
                                    -- in network byte order,
                                    -- 1 octet of node number
                OCTET STRING (SIZE (3))

        DdpSocketAddress ::=        -- 2 octets of net number
                                    -- in network byte order,
                                    -- 1 octet of node number,

                                    -- 1 octet of socket number
                                    -- (0..255)
                OCTET STRING (SIZE (4))

        ATName ::=              -- 0 to 32 octets of AppleTalk
                                    -- ASCII [Inside AppleTalk]
                OCTET STRING (SIZE (0..32))


    llap         OBJECT IDENTIFIER ::= { appletalk 1 }
    aarp         OBJECT IDENTIFIER ::= { appletalk 2 }
    atport       OBJECT IDENTIFIER ::= { appletalk 3 }
    ddp          OBJECT IDENTIFIER ::= { appletalk 4 }
    rtmp         OBJECT IDENTIFIER ::= { appletalk 5 }
    kip          OBJECT IDENTIFIER ::= { appletalk 6 }
    zipRouter    OBJECT IDENTIFIER ::= { appletalk 7 }
    nbp          OBJECT IDENTIFIER ::= { appletalk 8 }
    atecho       OBJECT IDENTIFIER ::= { appletalk 9 }
    atp          OBJECT IDENTIFIER ::= { appletalk 10 }
    pap          OBJECT IDENTIFIER ::= { appletalk 11 }
    asp          OBJECT IDENTIFIER ::= { appletalk 12 }
    adsp         OBJECT IDENTIFIER ::= { appletalk 13 }
    atportptop   OBJECT IDENTIFIER ::= { appletalk 14 }
    rtmpStub     OBJECT IDENTIFIER ::= { appletalk 16 }
    zipEndNode   OBJECT IDENTIFIER ::= { appletalk 17 }
    perPort  OBJECT IDENTIFIER ::= { appletalk 18 }


-- The LLAP Group
--
-- Implementation of this group is mandatory for all
-- entities that implement LLAP
--
-- Notes for the interfaces group
--
-- When implementing the Interfaces Group of MIB-II, it is
-- suggested that the following values be used for any
-- LocalTalk interfaces:
--  ifMtu: 600
--  ifSpeed: 230000
--  ifPhysAddress: the one octet node number for the
--      particular interface
--
-- Note also that LLAP control packets should not be
-- included in the Interfaces Group packet or octet
-- counters.

llapTable OBJECT-TYPE
    SYNTAX SEQUENCE OF LlapEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The list of LLAP entries."
    ::= { llap 1 }

llapEntry OBJECT-TYPE
    SYNTAX LlapEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An LLAP entry containing objects for the LocalTalk
        Link Access Protocol for a particular LocalTalk
        interface.

        As an example, an instance of the llapOutPkts object
        might be named llapOutPks.1"
    INDEX { llapIfIndex }
    ::= { llapTable 1 }

LlapEntry ::= SEQUENCE {
    llapIfIndex             INTEGER,
    llapInPkts              Counter,
    llapOutPkts             Counter,
    llapInNoHandlers        Counter,
    llapInLengthErrors      Counter,
    llapInErrors            Counter,
    llapCollisions          Counter,
    llapDefers              Counter,
    llapNoDataErrors        Counter,
    llapRandomCTSErrors     Counter,
    llapFCSErrors           Counter
}

llapIfIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The LLAP interface to which this entry pertains.
        The interface identified by a particular value of
        this index is the same interface as identified
        by the same value of ifIndex."
    ::= { llapEntry 1 }

-- this object has been deprecated because it duplicates the
-- sum of the MIB-II variables ifInUcastPkts and
-- ifInNUcastPkts

llapInPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS deprecated
    DESCRIPTION
        "The total number of good data packets received on
        this LocalTalk interface."
    ::= { llapEntry 2 }

-- this object has been deprecated because it duplicates the
-- sum of the MIB-II variables ifOutUcastPkts and
-- ifOutNUcastPkts

llapOutPkts OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS deprecated
    DESCRIPTION
        "The total number of data packets transmitted on
        this LocalTalk interface."
    ::= { llapEntry 3 }

-- this object has been deprecated because it duplicates the
-- MIB-II variable ifInUnknownProtos

llapInNoHandlers OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS deprecated
    DESCRIPTION
        "The total number of good packets received on this
        LocalTalk interface for which there was no protocol
        handler."
    ::= { llapEntry 4 }

llapInLengthErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of packets received on this LocalTalk
        interface whose actual length did not match the length
        in the header."
    ::= { llapEntry 5 }

-- this object has been deprecated because it duplicates the
-- MIB-II variable ifInErrors

llapInErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS deprecated
    DESCRIPTION
        "The total number of packets containing errors received
        on this LocalTalk interface."
    ::= { llapEntry 6 }

llapCollisions OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of collisions assumed on this
        LocalTalk interface due to the lack of a lapCTS reply."
    ::= { llapEntry 7 }

llapDefers OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of times this LocalTalk interface
        deferred to other packets."
    ::= { llapEntry 8 }

llapNoDataErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of times this LocalTalk interface
        received a lapRTS packet and expected a data packet,
        but did not receive any data packet."
    ::= { llapEntry 9 }

llapRandomCTSErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of times this LocalTalk interface
        received a lapCTS packet that was not solicited by a
        lapRTS packet."
    ::= { llapEntry 10 }

llapFCSErrors OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The total number of times this LocalTalk interface
        received a packet with an FCS (Frame Check Sequence)
        error."
    ::= { llapEntry 11 }


-- The AARP Group
--
-- Implementation of this group is mandatory for all entities
-- that implement AARP

aarpTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AarpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The AppleTalk Address Translation Table contains an
        equivalence of AppleTalk Network Addresses to the link
        layer physical address."
    ::= { aarp 1 }

aarpEntry OBJECT-TYPE
    SYNTAX AarpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry contains one AppleTalk Network Address to
        physical address equivalence.

        As an example, an instance of the aarpPhysAddress
        object might be named aarpPhysAddress.1.0.80.234"
    INDEX { aarpIfIndex, aarpNetAddress }
    ::= { aarpTable 1 }

AarpEntry ::= SEQUENCE {
    aarpIfIndex     INTEGER,
    aarpPhysAddress OCTET STRING,
    aarpNetAddress  DdpNodeAddress,
    aarpStatus      INTEGER
}

aarpIfIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The interface on which this entry's equivalence is
        effective.  The interface identified by a particular
        value of this index is the same interface as
        identified by the same value of ifIndex."
    ::= { aarpEntry 1 }

aarpPhysAddress OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The media-dependent physical address."
    ::= { aarpEntry 2 }

aarpNetAddress OBJECT-TYPE
    SYNTAX DdpNodeAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The AppleTalk Network Address corresponding to the
        media-dependent physical address."
    ::= { aarpEntry 3 }

aarpStatus OBJECT-TYPE
    SYNTAX INTEGER {
        valid(1),
        invalid(2)
    }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of this AARP entry.
        Setting this object to the value invalid(2) has the
        effect of invalidating the corresponding entry in the
        aarpTable.  That is, it effectively disassociates
        the mapping identified with said entry.  It is an
        implementation-specific matter as to whether the agent
        removes an invalidated entry from the table.
        Accordingly, management stations must be prepared to
        receive from agents tabular information corresponding
        to entries not currently in use.  Proper
        interpretation of such entries requires examination
        of the relevant aarpStatus object."
    ::= { aarpEntry 4 }

aarpLookups OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times the AARP cache for this entity
        was searched."
    ::= { aarp 2 }

aarpHits OBJECT-TYPE
    SYNTAX Counter
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of times an entry was searched for and
        found in the AARP cache for this entity."
    ::= { aarp 3 }


-- The ATPort Group
--
-- Implementation of this group is mandatory for all entities
-- that implement AppleTalk ports
--
-- Note that to be compliant with this group, all variables
-- that have read-write access must be implemented as
-- read-write.

atportTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AtportEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A list of AppleTalk ports for this entity."
    ::= { atport 1 }

atportEntry OBJECT-TYPE
    SYNTAX AtportEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The description of one of the AppleTalk
        ports on this entity.

        As an example, an instance of the atportNetFrom object
        might be named atportNetFrom.2"
    INDEX { atportIndex }
    ::= { atportTable 1 }

AtportEntry ::= SEQUENCE {
    atportIndex               INTEGER,
    atportDescr               DisplayString,
    atportType                INTEGER,
    atportNetStart            ATNetworkNumber,
    atportNetEnd              ATNetworkNumber,
    atportNetAddress          DdpNodeAddress,
    atportStatus              INTEGER,
    atportNetConfig           INTEGER,
    atportZoneConfig          INTEGER,
    atportZoneDefault         ATName,
    atportIfIndex             INTEGER,
    atportNetFrom             DdpNodeAddress,
    atportZoneFrom            DdpNodeAddress,
    atportInPkts              Counter,
    atportOutPkts             Counter,
    atportHome                INTEGER,
    atportCurrentZone         ATName,
    atportConflictPhysAddr    OCTET STRING
}

atportIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "A unique value for each AppleTalk port.
        Its value is between 1 and the total number of
        AppleTalk ports.  The value for each port must
        remain constant at least from the re-initialization
        of the entity's network management system to the
        next re-initialization."
    ::= { atportEntry 1 }

atportDescr OBJECT-TYPE
    SYNTAX DisplayString
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "A text string containing information about the
        port.  This string is intended for presentation
        to a human; it must not contain anything but printable
        ASCII characters."
    ::= { atportEntry 2 }

-- Several objects throughout the MIB key off of atportType to
-- determine the format of OCTET STRING addresses of peers.
-- The address formats are as follows:
--     localtalk, ethertalk1, ethertalk2, tokentalk, iptalk,
--       fdditalk, smdstalk, arctalk, and virtual take the