readme.txt

对ADSP21369的原理图和测试程序进行搜集

-------------------------------------------------------------------------------
Example: Talkthru Analog In-Out (AD1835...P10=Input, J5 and P7=Output)
Target:   ADSP-21369
Date:     July 29, 2004
Tools:    VisualDSP++ 4.0
Hardware: ADSP-21369 EZ-KIT LITE
-------------------------------------------------------------------------------

Multichannel analog talk-through (stereo in -> four stereo pairs out)

TalkThrough reads audio samples from the stereo ADC of the AD1835 codec, and it
passes the unmodified data through to the four DACs.  Each interrupt reads a
single 24-bit sample (alternating left and right) using SPORT0 and immediately
writes the same value to both the A and B data channels of SPORT1 and SPORT2.
All audio is transmitted in I2S mode.  A 12.288 MHz clock is fed to the ADC as
MCLK, and the ADC generates the 64*48KHz bit clock and the 48 KHz frame sync.

-------------------------------------------------------------------------------
Instructions: Download the executable to the EZ-KIT.  There are no user
controls or visual outputs.

Required Switch Settings: SW3 - 1=Off, 2=On, 3=On, 4=On
                        (this is the default setting)
-------------------------------------------------------------------------------
Source Files contained in this directory:
21369_IVT.asm          Interrupt vector table code
ADSP-21369-EZKIT.ldf   Linker description file
ad1835.h               Header with constants for controlling the audio codec
main.asm               Calls initialization routines then waits for interrupts
init1835viaSPI.asm     Initializes the codec
initSRU.asm            Initializes the SRU & DAI/DPI pins
initPLL_SDRAM.asm      Configures the DSP to run at CCLK= 393.21 MHz & SDCLK= 157.28 MHz
initSPORT.asm          Initializes the transmit and receive serial ports
SPORTisr.asm           The interrupt service routine
Talkthru Analog In-Out.dpj    VisualDSP Project File
-------------------------------------------------------------------------------
Dependencies contained in VisualDSP++ default include path:
def21369.h             Header with constants for the SHARC
SRU.h                  Macro to simplify programming the SRU & DAI pins
*******************************************************************************
Analog Devices, Inc.
DSP Division
One Technology Way
Norwood, MA 02062

(c) 2005 Analog Devices, Inc.  All rights reserved.
*******************************************************************************