lm3s101.h

Luminary coxter_M3 内核的遥控源代码

//
// The following are defines for the bit fields in the COMP_O_ACSTAT0 register.
//
//*****************************************************************************
#define COMP_ACSTAT0_OVAL       0x00000002  // Comparator Output Value.

//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACCTL0 register.
//
//*****************************************************************************
#define COMP_ACCTL0_ASRCP_M     0x00000600  // Analog Source Positive.
#define COMP_ACCTL0_ASRCP_PIN   0x00000000  // Pin value
#define COMP_ACCTL0_ASRCP_PIN0  0x00000200  // Pin value of C0+
#define COMP_ACCTL0_ASRCP_REF   0x00000400  // Internal voltage reference
#define COMP_ACCTL0_ISLVAL      0x00000010  // Interrupt Sense Level Value.
#define COMP_ACCTL0_ISEN_M      0x0000000C  // Interrupt Sense.
#define COMP_ACCTL0_ISEN_LEVEL  0x00000000  // Level sense, see ISLVAL
#define COMP_ACCTL0_ISEN_FALL   0x00000004  // Falling edge
#define COMP_ACCTL0_ISEN_RISE   0x00000008  // Rising edge
#define COMP_ACCTL0_ISEN_BOTH   0x0000000C  // Either edge
#define COMP_ACCTL0_CINV        0x00000002  // Comparator Output Invert.

//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACSTAT1 register.
//
//*****************************************************************************
#define COMP_ACSTAT1_OVAL       0x00000002  // Comparator Output Value.

//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACCTL1 register.
//
//*****************************************************************************
#define COMP_ACCTL1_ASRCP_M     0x00000600  // Analog Source Positive.
#define COMP_ACCTL1_ASRCP_PIN   0x00000000  // Pin value
#define COMP_ACCTL1_ASRCP_PIN0  0x00000200  // Pin value of C0+
#define COMP_ACCTL1_ASRCP_REF   0x00000400  // Internal voltage reference
#define COMP_ACCTL1_ISLVAL      0x00000010  // Interrupt Sense Level Value.
#define COMP_ACCTL1_ISEN_M      0x0000000C  // Interrupt Sense.
#define COMP_ACCTL1_ISEN_LEVEL  0x00000000  // Level sense, see ISLVAL
#define COMP_ACCTL1_ISEN_FALL   0x00000004  // Falling edge
#define COMP_ACCTL1_ISEN_RISE   0x00000008  // Rising edge
#define COMP_ACCTL1_ISEN_BOTH   0x0000000C  // Either edge
#define COMP_ACCTL1_CINV        0x00000002  // Comparator Output Invert.

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMA register.
//
//*****************************************************************************
#define FLASH_FMA_OFFSET_M      0x00001FFF  // Address Offset.
#define FLASH_FMA_OFFSET_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMD register.
//
//*****************************************************************************
#define FLASH_FMD_DATA_M        0xFFFFFFFF  // Data Value.
#define FLASH_FMD_DATA_S        0

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMC register.
//
//*****************************************************************************
#define FLASH_FMC_WRKEY_M       0xFFFF0000  // Flash Write Key.
#define FLASH_FMC_COMT          0x00000008  // Commit Register Value.
#define FLASH_FMC_MERASE        0x00000004  // Mass Erase Flash Memory.
#define FLASH_FMC_ERASE         0x00000002  // Erase a Page of Flash Memory.
#define FLASH_FMC_WRITE         0x00000001  // Write a Word into Flash Memory.
#define FLASH_FMC_WRKEY_S       16

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FCRIS register.
//
//*****************************************************************************
#define FLASH_FCRIS_PRIS        0x00000002  // Programming Raw Interrupt
                                            // Status.
#define FLASH_FCRIS_ARIS        0x00000001  // Access Raw Interrupt Status.

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FCIM register.
//
//*****************************************************************************
#define FLASH_FCIM_PMASK        0x00000002  // Programming Interrupt Mask.
#define FLASH_FCIM_AMASK        0x00000001  // Access Interrupt Mask.

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FCMISC register.
//
//*****************************************************************************
#define FLASH_FCMISC_PMISC      0x00000002  // Programming Masked Interrupt
                                            // Status and Clear.
#define FLASH_FCMISC_AMISC      0x00000001  // Access Masked Interrupt Status
                                            // and Clear.

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_USECRL register.
//
//*****************************************************************************
#define FLASH_USECRL_M          0x000000FF  // Microsecond Reload Value.
#define FLASH_USECRL_S          0

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DID0 register.
//
//*****************************************************************************
#define SYSCTL_DID0_VER_M       0x70000000  // DID0 Version.
#define SYSCTL_DID0_VER_0       0x00000000  // Initial DID0 register format
                                            // definition for Stellaris(r)
                                            // Sandstorm-class devices.
#define SYSCTL_DID0_MAJ_M       0x0000FF00  // Major Revision.
#define SYSCTL_DID0_MAJ_REVA    0x00000000  // Revision A (initial device)
#define SYSCTL_DID0_MAJ_REVB    0x00000100  // Revision B (first base layer
                                            // revision)
#define SYSCTL_DID0_MAJ_REVC    0x00000200  // Revision C (second base layer
                                            // revision)
#define SYSCTL_DID0_MIN_M       0x000000FF  // Minor Revision.
#define SYSCTL_DID0_MIN_0       0x00000000  // Initial device, or a major
                                            // revision update.
#define SYSCTL_DID0_MIN_1       0x00000001  // First metal layer change.
#define SYSCTL_DID0_MIN_2       0x00000002  // Second metal layer change.

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DID1 register.
//
//*****************************************************************************
#define SYSCTL_DID1_VER_M       0xF0000000  // DID1 Version.
#define SYSCTL_DID1_VER_0       0x00000000  // Initial DID1 register format
                                            // definition, indicating a
                                            // Stellaris LM3Snnn device.
#define SYSCTL_DID1_FAM_M       0x0F000000  // Family.
#define SYSCTL_DID1_FAM_STELLARIS \
                                0x00000000  // Stellaris family of
                                            // microcontollers, that is, all
                                            // devices with external part
                                            // numbers starting with LM3S.
#define SYSCTL_DID1_PRTNO_M     0x00FF0000  // Part Number.
#define SYSCTL_DID1_PRTNO_101   0x00010000  // LM3S101
#define SYSCTL_DID1_TEMP_M      0x000000E0  // Temperature Range.
#define SYSCTL_DID1_TEMP_I      0x00000020  // Industrial temperature range
                                            // (-40C to 85C)
#define SYSCTL_DID1_PKG_M       0x00000018  // Package Type.
#define SYSCTL_DID1_PKG_28SOIC  0x00000000  // 28-pin SOIC package
#define SYSCTL_DID1_ROHS        0x00000004  // RoHS-Compliance.
#define SYSCTL_DID1_QUAL_M      0x00000003  // Qualification Status.
#define SYSCTL_DID1_QUAL_ES     0x00000000  // Engineering Sample (unqualified)
#define SYSCTL_DID1_QUAL_PP     0x00000001  // Pilot Production (unqualified)
#define SYSCTL_DID1_QUAL_FQ     0x00000002  // Fully Qualified

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC0 register.
//
//*****************************************************************************
#define SYSCTL_DC0_SRAMSZ_M     0xFFFF0000  // SRAM Size.
#define SYSCTL_DC0_SRAMSZ_2KB   0x00070000  // 2 KB of SRAM
#define SYSCTL_DC0_FLASHSZ_M    0x0000FFFF  // Flash Size.
#define SYSCTL_DC0_FLASHSZ_8KB  0x00000003  // 8 KB of Flash

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC1 register.
//
//*****************************************************************************
#define SYSCTL_DC1_MINSYSDIV_M  0x0000F000  // System Clock Divider.
#define SYSCTL_DC1_MINSYSDIV_20 0x00009000  // Specifies a 20-MHz clock with a
                                            // PLL divider of 10.
#define SYSCTL_DC1_PLL          0x00000010  // PLL Present.
#define SYSCTL_DC1_WDT          0x00000008  // Watchdog Timer Present.
#define SYSCTL_DC1_SWO          0x00000004  // SWO Trace Port Present.
#define SYSCTL_DC1_SWD          0x00000002  // SWD Present.
#define SYSCTL_DC1_JTAG         0x00000001  // JTAG Present.

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC2 register.
//
//*****************************************************************************
#define SYSCTL_DC2_COMP1        0x02000000  // Analog Comparator 1 Present.
#define SYSCTL_DC2_COMP0        0x01000000  // Analog Comparator 0 Present.
#define SYSCTL_DC2_TIMER1       0x00020000  // Timer 1 Present.
#define SYSCTL_DC2_TIMER0       0x00010000  // Timer 0 Present.
#define SYSCTL_DC2_SSI0         0x00000010  // SSI0 Present.
#define SYSCTL_DC2_UART0        0x00000001  // UART0 Present.

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC3 register.
//
//*****************************************************************************
#define SYSCTL_DC3_32KHZ        0x80000000  // 32KHz Pin Present.
#define SYSCTL_DC3_CCP0         0x01000000  // CCP0 Pin Present.
#define SYSCTL_DC3_C1MINUS      0x00000200  // C1- Pin Present.
#define SYSCTL_DC3_C0O          0x00000100  // C0o Pin Present.
#define SYSCTL_DC3_C0PLUS       0x00000080  // C0+ Pin Present.
#define SYSCTL_DC3_C0MINUS      0x00000040  // C0- Pin Present.

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC4 register.
//
//*****************************************************************************
#define SYSCTL_DC4_GPIOC        0x00000004  // GPIO Port C Present.
#define SYSCTL_DC4_GPIOB        0x00000002  // GPIO Port B Present.
#define SYSCTL_DC4_GPIOA        0x00000001  // GPIO Port A Present.

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PBORCTL register.
//
//*****************************************************************************
#define SYSCTL_PBORCTL_BORTIM_M 0x0000FFFC  // BOR Time Delay.
#define SYSCTL_PBORCTL_BORIOR   0x00000002  // BOR Interrupt or Reset.
#define SYSCTL_PBORCTL_BORWT    0x00000001  // BOR Wait and Check for Noise.
#define SYSCTL_PBORCTL_BORTIM_S 2

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_LDOPCTL register.
//
//*****************************************************************************
#define SYSCTL_LDOPCTL_M        0x0000003F  // LDO Output Volta