lm3s2730.h

Luminary coxter_M3 内核的遥控源代码

#define FLASH_FMPRE2_R          (*((volatile unsigned long *)0x400FE208))
#define FLASH_FMPRE3_R          (*((volatile unsigned long *)0x400FE20C))
#define FLASH_FMPPE0_R          (*((volatile unsigned long *)0x400FE400))
#define FLASH_FMPPE1_R          (*((volatile unsigned long *)0x400FE404))
#define FLASH_FMPPE2_R          (*((volatile unsigned long *)0x400FE408))
#define FLASH_FMPPE3_R          (*((volatile unsigned long *)0x400FE40C))

//*****************************************************************************
//
// System Control (SYSCTL)
//
//*****************************************************************************
#define SYSCTL_DID0_R           (*((volatile unsigned long *)0x400FE000))
#define SYSCTL_DID1_R           (*((volatile unsigned long *)0x400FE004))
#define SYSCTL_DC0_R            (*((volatile unsigned long *)0x400FE008))
#define SYSCTL_DC1_R            (*((volatile unsigned long *)0x400FE010))
#define SYSCTL_DC2_R            (*((volatile unsigned long *)0x400FE014))
#define SYSCTL_DC3_R            (*((volatile unsigned long *)0x400FE018))
#define SYSCTL_DC4_R            (*((volatile unsigned long *)0x400FE01C))
#define SYSCTL_PBORCTL_R        (*((volatile unsigned long *)0x400FE030))
#define SYSCTL_LDOPCTL_R        (*((volatile unsigned long *)0x400FE034))
#define SYSCTL_SRCR0_R          (*((volatile unsigned long *)0x400FE040))
#define SYSCTL_SRCR1_R          (*((volatile unsigned long *)0x400FE044))
#define SYSCTL_SRCR2_R          (*((volatile unsigned long *)0x400FE048))
#define SYSCTL_RIS_R            (*((volatile unsigned long *)0x400FE050))
#define SYSCTL_IMC_R            (*((volatile unsigned long *)0x400FE054))
#define SYSCTL_MISC_R           (*((volatile unsigned long *)0x400FE058))
#define SYSCTL_RESC_R           (*((volatile unsigned long *)0x400FE05C))
#define SYSCTL_RCC_R            (*((volatile unsigned long *)0x400FE060))
#define SYSCTL_PLLCFG_R         (*((volatile unsigned long *)0x400FE064))
#define SYSCTL_RCC2_R           (*((volatile unsigned long *)0x400FE070))
#define SYSCTL_RCGC0_R          (*((volatile unsigned long *)0x400FE100))
#define SYSCTL_RCGC1_R          (*((volatile unsigned long *)0x400FE104))
#define SYSCTL_RCGC2_R          (*((volatile unsigned long *)0x400FE108))
#define SYSCTL_SCGC0_R          (*((volatile unsigned long *)0x400FE110))
#define SYSCTL_SCGC1_R          (*((volatile unsigned long *)0x400FE114))
#define SYSCTL_SCGC2_R          (*((volatile unsigned long *)0x400FE118))
#define SYSCTL_DCGC0_R          (*((volatile unsigned long *)0x400FE120))
#define SYSCTL_DCGC1_R          (*((volatile unsigned long *)0x400FE124))
#define SYSCTL_DCGC2_R          (*((volatile unsigned long *)0x400FE128))
#define SYSCTL_DSLPCLKCFG_R     (*((volatile unsigned long *)0x400FE144))

//*****************************************************************************
//
// Nested Vectored Interrupt Ctrl (NVIC)
//
//*****************************************************************************
#define NVIC_INT_TYPE_R         (*((volatile unsigned long *)0xE000E004))
#define NVIC_ST_CTRL_R          (*((volatile unsigned long *)0xE000E010))
#define NVIC_ST_RELOAD_R        (*((volatile unsigned long *)0xE000E014))
#define NVIC_ST_CURRENT_R       (*((volatile unsigned long *)0xE000E018))
#define NVIC_ST_CAL_R           (*((volatile unsigned long *)0xE000E01C))
#define NVIC_EN0_R              (*((volatile unsigned long *)0xE000E100))
#define NVIC_EN1_R              (*((volatile unsigned long *)0xE000E104))
#define NVIC_DIS0_R             (*((volatile unsigned long *)0xE000E180))
#define NVIC_DIS1_R             (*((volatile unsigned long *)0xE000E184))
#define NVIC_PEND0_R            (*((volatile unsigned long *)0xE000E200))
#define NVIC_PEND1_R            (*((volatile unsigned long *)0xE000E204))
#define NVIC_UNPEND0_R          (*((volatile unsigned long *)0xE000E280))
#define NVIC_UNPEND1_R          (*((volatile unsigned long *)0xE000E284))
#define NVIC_ACTIVE0_R          (*((volatile unsigned long *)0xE000E300))
#define NVIC_ACTIVE1_R          (*((volatile unsigned long *)0xE000E304))
#define NVIC_PRI0_R             (*((volatile unsigned long *)0xE000E400))
#define NVIC_PRI1_R             (*((volatile unsigned long *)0xE000E404))
#define NVIC_PRI2_R             (*((volatile unsigned long *)0xE000E408))
#define NVIC_PRI3_R             (*((volatile unsigned long *)0xE000E40C))
#define NVIC_PRI4_R             (*((volatile unsigned long *)0xE000E410))
#define NVIC_PRI5_R             (*((volatile unsigned long *)0xE000E414))
#define NVIC_PRI6_R             (*((volatile unsigned long *)0xE000E418))
#define NVIC_PRI7_R             (*((volatile unsigned long *)0xE000E41C))
#define NVIC_PRI8_R             (*((volatile unsigned long *)0xE000E420))
#define NVIC_PRI9_R             (*((volatile unsigned long *)0xE000E424))
#define NVIC_PRI10_R            (*((volatile unsigned long *)0xE000E428))
#define NVIC_CPUID_R            (*((volatile unsigned long *)0xE000ED00))
#define NVIC_INT_CTRL_R         (*((volatile unsigned long *)0xE000ED04))
#define NVIC_VTABLE_R           (*((volatile unsigned long *)0xE000ED08))
#define NVIC_APINT_R            (*((volatile unsigned long *)0xE000ED0C))
#define NVIC_SYS_CTRL_R         (*((volatile unsigned long *)0xE000ED10))
#define NVIC_CFG_CTRL_R         (*((volatile unsigned long *)0xE000ED14))
#define NVIC_SYS_PRI1_R         (*((volatile unsigned long *)0xE000ED18))
#define NVIC_SYS_PRI2_R         (*((volatile unsigned long *)0xE000ED1C))
#define NVIC_SYS_PRI3_R         (*((volatile unsigned long *)0xE000ED20))
#define NVIC_SYS_HND_CTRL_R     (*((volatile unsigned long *)0xE000ED24))
#define NVIC_FAULT_STAT_R       (*((volatile unsigned long *)0xE000ED28))
#define NVIC_HFAULT_STAT_R      (*((volatile unsigned long *)0xE000ED2C))
#define NVIC_DEBUG_STAT_R       (*((volatile unsigned long *)0xE000ED30))
#define NVIC_MM_ADDR_R          (*((volatile unsigned long *)0xE000ED34))
#define NVIC_FAULT_ADDR_R       (*((volatile unsigned long *)0xE000ED38))
#define NVIC_MPU_TYPE_R         (*((volatile unsigned long *)0xE000ED90))
#define NVIC_MPU_CTRL_R         (*((volatile unsigned long *)0xE000ED94))
#define NVIC_MPU_NUMBER_R       (*((volatile unsigned long *)0xE000ED98))
#define NVIC_MPU_R              (*((volatile unsigned long *)0xE000ED9C))
#define NVIC_MPU_ATTR_R         (*((volatile unsigned long *)0xE000EDA0))
#define NVIC_DBG_CTRL_R         (*((volatile unsigned long *)0xE000EDF0))
#define NVIC_DBG_XFER_R         (*((volatile unsigned long *)0xE000EDF4))
#define NVIC_DBG_DATA_R         (*((volatile unsigned long *)0xE000EDF8))
#define NVIC_DBG_INT_R          (*((volatile unsigned long *)0xE000EDFC))
#define NVIC_SW_TRIG_R          (*((volatile unsigned long *)0xE000EF00))

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_LOAD register.
//
//*****************************************************************************
#define WDT_LOAD_M              0xFFFFFFFF  // Watchdog Load Value.
#define WDT_LOAD_S              0

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_VALUE register.
//
//*****************************************************************************
#define WDT_VALUE_M             0xFFFFFFFF  // Watchdog Value.
#define WDT_VALUE_S             0

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_CTL register.
//
//*****************************************************************************
#define WDT_CTL_RESEN           0x00000002  // Watchdog Reset Enable.
#define WDT_CTL_INTEN           0x00000001  // Watchdog Interrupt Enable.

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_ICR register.
//
//*****************************************************************************
#define WDT_ICR_M               0xFFFFFFFF  // Watchdog Interrupt Clear.
#define WDT_ICR_S               0

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_RIS register.
//
//*****************************************************************************
#define WDT_RIS_WDTRIS          0x00000001  // Watchdog Raw Interrupt Status.

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_MIS register.
//
//*****************************************************************************
#define WDT_MIS_WDTMIS          0x00000001  // Watchdog Masked Interrupt
                                            // Status.

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_TEST register.
//
//*****************************************************************************
#define WDT_TEST_STALL          0x00000100  // Watchdog Stall Enable.

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_LOCK register.
//
//*****************************************************************************
#define WDT_LOCK_M              0xFFFFFFFF  // Watchdog Lock.
#define WDT_LOCK_UNLOCKED       0x00000000  // Unlocked
#define WDT_LOCK_LOCKED         0x00000001  // Locked

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_LOCK register.
//
//*****************************************************************************
#define GPIO_LOCK_M             0xFFFFFFFF  // GPIO Lock.
#define GPIO_LOCK_UNLOCKED      0x00000000  // unlocked
#define GPIO_LOCK_LOCKED        0x00000001  // locked
#define GPIO_LOCK_KEY           0x1ACCE551  // Unlocks the GPIO_CR register

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CR0 register.
//
//*****************************************************************************
#define SSI_CR0_SCR_M           0x0000FF00  // SSI Serial Clock Rate.
#define SSI_CR0_SPH             0x00000080  // SSI Serial Clock Phase.
#define SSI_CR0_SPO             0x00000040  // SSI Serial Clock Polarity.
#define SSI_CR0_FRF_M           0x00000030  // SSI Frame Format Select.
#define SSI_CR0_FRF_MOTO        0x00000000  // Freescale SPI Frame Format
#define SSI_CR0_FRF_TI          0x00000010  // Texas Intruments Synchronous
                                            // Serial Frame Format
#define SSI_CR0_FRF_NMW         0x00000020  // MICROWIRE Frame Format
#define SSI_CR0_DSS_M           0x0000000F  // SSI Data Size Select.
#define SSI_CR0_DSS_4           0x00000003  // 4-bit data
#define SSI_CR0_DSS_5           0x00000004  // 5-bit data
#define SSI_CR0_DSS_6           0x00000005  // 6-bit data
#define SSI_CR0_DSS_7           0x00000006  // 7-bit data
#define SSI_CR0_DSS_8           0x00000007  // 8-bit data
#define SSI_CR0_DSS_9           0x00000008  // 9-bit data
#define SSI_CR0_DSS_10          0x00000009  // 10-bit data
#define SSI_CR0_DSS_11          0x0000000A  // 11-bit data
#define SSI_CR0_DSS_12          0x0000000B  // 12-bit data
#define SSI_CR0_DSS_13          0x0000000C  // 13-bit data
#define SSI_CR0_DSS_14          0x0000000D  // 14-bit data
#define SSI_CR0_DSS_15          0x0000000E  // 15-bit data
#define SSI_CR0_DSS_16          0x0000000F  // 16-bit data
#define SSI_CR0_SCR_S           8

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CR1 register.
//
//*****************************************************************************
#define SSI_CR1_SOD             0x00000008  // SSI Slave Mode Output Disable.
#define SSI_CR1_MS              0x00000004  // SSI Master/Slave Select.
#define SSI_CR1_SSE             0x00000002  // SSI Synchronous Serial Port
                                            // Enable.
#define SSI_CR1_LBM             0x00000001  // SSI Loopback Mode.

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_DR register.
//
//*****************************************************************************
#define SSI_DR_DATA_M           0x0000FFFF  // SSI Receive/Transmit Data.
#define SSI_DR_DATA_S           0

//*****************************************************************************