lm3s8930.h

Luminary coxter_M3 内核的遥控源代码

#define NVIC_DEBUG_STAT_R       (*((volatile unsigned long *)0xE000ED30))
#define NVIC_MM_ADDR_R          (*((volatile unsigned long *)0xE000ED34))
#define NVIC_FAULT_ADDR_R       (*((volatile unsigned long *)0xE000ED38))
#define NVIC_MPU_TYPE_R         (*((volatile unsigned long *)0xE000ED90))
#define NVIC_MPU_CTRL_R         (*((volatile unsigned long *)0xE000ED94))
#define NVIC_MPU_NUMBER_R       (*((volatile unsigned long *)0xE000ED98))
#define NVIC_MPU_R              (*((volatile unsigned long *)0xE000ED9C))
#define NVIC_MPU_ATTR_R         (*((volatile unsigned long *)0xE000EDA0))
#define NVIC_DBG_CTRL_R         (*((volatile unsigned long *)0xE000EDF0))
#define NVIC_DBG_XFER_R         (*((volatile unsigned long *)0xE000EDF4))
#define NVIC_DBG_DATA_R         (*((volatile unsigned long *)0xE000EDF8))
#define NVIC_DBG_INT_R          (*((volatile unsigned long *)0xE000EDFC))
#define NVIC_SW_TRIG_R          (*((volatile unsigned long *)0xE000EF00))

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_LOAD register.
//
//*****************************************************************************
#define WDT_LOAD_M              0xFFFFFFFF  // Watchdog Load Value.
#define WDT_LOAD_S              0

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_VALUE register.
//
//*****************************************************************************
#define WDT_VALUE_M             0xFFFFFFFF  // Watchdog Value.
#define WDT_VALUE_S             0

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_CTL register.
//
//*****************************************************************************
#define WDT_CTL_RESEN           0x00000002  // Watchdog Reset Enable.
#define WDT_CTL_INTEN           0x00000001  // Watchdog Interrupt Enable.

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_ICR register.
//
//*****************************************************************************
#define WDT_ICR_M               0xFFFFFFFF  // Watchdog Interrupt Clear.
#define WDT_ICR_S               0

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_RIS register.
//
//*****************************************************************************
#define WDT_RIS_WDTRIS          0x00000001  // Watchdog Raw Interrupt Status.

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_MIS register.
//
//*****************************************************************************
#define WDT_MIS_WDTMIS          0x00000001  // Watchdog Masked Interrupt
                                            // Status.

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_TEST register.
//
//*****************************************************************************
#define WDT_TEST_STALL          0x00000100  // Watchdog Stall Enable.

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_LOCK register.
//
//*****************************************************************************
#define WDT_LOCK_M              0xFFFFFFFF  // Watchdog Lock.
#define WDT_LOCK_UNLOCKED       0x00000000  // Unlocked
#define WDT_LOCK_LOCKED         0x00000001  // Locked

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_LOCK register.
//
//*****************************************************************************
#define GPIO_LOCK_M             0xFFFFFFFF  // GPIO Lock.
#define GPIO_LOCK_UNLOCKED      0x00000000  // unlocked
#define GPIO_LOCK_LOCKED        0x00000001  // locked
#define GPIO_LOCK_KEY           0x1ACCE551  // Unlocks the GPIO_CR register

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CR0 register.
//
//*****************************************************************************
#define SSI_CR0_SCR_M           0x0000FF00  // SSI Serial Clock Rate.
#define SSI_CR0_SPH             0x00000080  // SSI Serial Clock Phase.
#define SSI_CR0_SPO             0x00000040  // SSI Serial Clock Polarity.
#define SSI_CR0_FRF_M           0x00000030  // SSI Frame Format Select.
#define SSI_CR0_FRF_MOTO        0x00000000  // Freescale SPI Frame Format
#define SSI_CR0_FRF_TI          0x00000010  // Texas Intruments Synchronous
                                            // Serial Frame Format
#define SSI_CR0_FRF_NMW         0x00000020  // MICROWIRE Frame Format
#define SSI_CR0_DSS_M           0x0000000F  // SSI Data Size Select.
#define SSI_CR0_DSS_4           0x00000003  // 4-bit data
#define SSI_CR0_DSS_5           0x00000004  // 5-bit data
#define SSI_CR0_DSS_6           0x00000005  // 6-bit data
#define SSI_CR0_DSS_7           0x00000006  // 7-bit data
#define SSI_CR0_DSS_8           0x00000007  // 8-bit data
#define SSI_CR0_DSS_9           0x00000008  // 9-bit data
#define SSI_CR0_DSS_10          0x00000009  // 10-bit data
#define SSI_CR0_DSS_11          0x0000000A  // 11-bit data
#define SSI_CR0_DSS_12          0x0000000B  // 12-bit data
#define SSI_CR0_DSS_13          0x0000000C  // 13-bit data
#define SSI_CR0_DSS_14          0x0000000D  // 14-bit data
#define SSI_CR0_DSS_15          0x0000000E  // 15-bit data
#define SSI_CR0_DSS_16          0x0000000F  // 16-bit data
#define SSI_CR0_SCR_S           8

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CR1 register.
//
//*****************************************************************************
#define SSI_CR1_SOD             0x00000008  // SSI Slave Mode Output Disable.
#define SSI_CR1_MS              0x00000004  // SSI Master/Slave Select.
#define SSI_CR1_SSE             0x00000002  // SSI Synchronous Serial Port
                                            // Enable.
#define SSI_CR1_LBM             0x00000001  // SSI Loopback Mode.

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_DR register.
//
//*****************************************************************************
#define SSI_DR_DATA_M           0x0000FFFF  // SSI Receive/Transmit Data.
#define SSI_DR_DATA_S           0

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_SR register.
//
//*****************************************************************************
#define SSI_SR_BSY              0x00000010  // SSI Busy Bit.
#define SSI_SR_RFF              0x00000008  // SSI Receive FIFO Full.
#define SSI_SR_RNE              0x00000004  // SSI Receive FIFO Not Empty.
#define SSI_SR_TNF              0x00000002  // SSI Transmit FIFO Not Full.
#define SSI_SR_TFE              0x00000001  // SSI Transmit FIFO Empty.

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CPSR register.
//
//*****************************************************************************
#define SSI_CPSR_CPSDVSR_M      0x000000FF  // SSI Clock Prescale Divisor.
#define SSI_CPSR_CPSDVSR_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_IM register.
//
//*****************************************************************************
#define SSI_IM_TXIM             0x00000008  // SSI Transmit FIFO Interrupt
                                            // Mask.
#define SSI_IM_RXIM             0x00000004  // SSI Receive FIFO Interrupt Mask.
#define SSI_IM_RTIM             0x00000002  // SSI Receive Time-Out Interrupt
                                            // Mask.
#define SSI_IM_RORIM            0x00000001  // SSI Receive Overrun Interrupt
                                            // Mask.

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_RIS register.
//
//*****************************************************************************
#define SSI_RIS_TXRIS           0x00000008  // SSI Transmit FIFO Raw Interrupt
                                            // Status.
#define SSI_RIS_RXRIS           0x00000004  // SSI Receive FIFO Raw Interrupt
                                            // Status.
#define SSI_RIS_RTRIS           0x00000002  // SSI Receive Time-Out Raw
                                            // Interrupt Status.
#define SSI_RIS_RORRIS          0x00000001  // SSI Receive Overrun Raw
                                            // Interrupt Status.

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_MIS register.
//
//*****************************************************************************
#define SSI_MIS_TXMIS           0x00000008  // SSI Transmit FIFO Masked
                                            // Interrupt Status.
#define SSI_MIS_RXMIS           0x00000004  // SSI Receive FIFO Masked
                                            // Interrupt Status.
#define SSI_MIS_RTMIS           0x00000002  // SSI Receive Time-Out Masked
                                            // Interrupt Status.
#define SSI_MIS_RORMIS          0x00000001  // SSI Receive Overrun Masked
                                            // Interrupt Status.

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_ICR register.
//
//*****************************************************************************
#define SSI_ICR_RTIC            0x00000002  // SSI Receive Time-Out Interrupt
                                            // Clear.
#define SSI_ICR_RORIC           0x00000001  // SSI Receive Overrun Interrupt
                                            // Clear.

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_DR register.
//
//*****************************************************************************
#define UART_DR_OE              0x00000800  // UART Overrun Error.
#define UART_DR_BE              0x00000400  // UART Break Error.
#define UART_DR_PE              0x00000200  // UART Parity Error.
#define UART_DR_FE              0x00000100  // UART Framing Error.
#define UART_DR_DATA_M          0x000000FF  // Data Transmitted or Received.
#define UART_DR_DATA_S          0