ex_bootload.c
来自「PIC单片机从SPI」· C语言 代码 · 共 55 行
C
55 行
///////////////////////////////////////////////////////////////////////////
//// EX_BOOTLOAD.C ////
//// ////
//// This program is an example application program that can be ////
//// be loaded, recompiled and reloaded by a stand alone bootloader. ////
//// ////
//// Before loading this program the bootloader (ex_bootloader.c) ////
//// must be compiled and loaded into the target chip. ////
//// ////
//// Use an RS232 link and the SIOW.EXE program to load this HEX file ////
//// into the target chip. See ex_bootloader.c for more information. ////
//// ////
//// Jumpers: ////
//// PCM,PCH pin C7 to RS232 RX, pin C6 to RS232 TX ////
//// ////
//// This example will work with the PCM and PCH compilers. The ////
//// following conditional compilation lines are used to include a ////
//// valid device for each compiler. Change the device, clock and ////
//// RS232 pins for your hardware if needed. ////
///////////////////////////////////////////////////////////////////////////
//// (C) Copyright 1996,2004 Custom Computer Services ////
//// This source code may only be used by licensed users of the CCS ////
//// C compiler. This source code may only be distributed to other ////
//// licensed users of the CCS C compiler. No other use, ////
//// reproduction or distribution is permitted without written ////
//// permission. Derivative programs created using this software ////
//// in object code form are not restricted in any way. ////
///////////////////////////////////////////////////////////////////////////
#if defined(__PCM__)
#include <16F877.h>
#fuses HS,NOWDT,NOPROTECT,NOLVP
#use delay(clock=20000000)
#use rs232(baud=9600, xmit=PIN_C6, rcv=PIN_C7)
#elif defined(__PCH__)
#include <18F452.h>
#fuses HS,NOWDT,NOPROTECT,NOLVP
#use delay(clock=20000000)
#use rs232(baud=9600, xmit=PIN_C6, rcv=PIN_C7)
#endif
#include <bootloader.h>
void main(void) {
int i=0;
printf("\r\nApplication program version 1.00 \r\n");
while(TRUE)
printf("%u ",++i);
}
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?