lmerr.int

East make Tray Icon in delphi

const
  NERR_Success = 0; // Success
  {$EXTERNALSYM NERR_Success}

// ERROR_ equates can be intermixed with NERR_ equates.

//    NERR_BASE is the base of error codes from network utilities,
//      chosen to avoid conflict with system and redirector error codes.
//      2100 is a value that has been assigned to us by system.

  NERR_BASE = 2100;
  {$EXTERNALSYM NERR_BASE}


//*INTERNAL_ONLY*

{**********WARNING *****************
 *See the comment in lmcons.h for  *
 *info on the allocation of errors *
 ***********************************}

{**********WARNING *****************
 *The range 2750-2799 has been     *
 *allocated to the IBM LAN Server  *
 ***********************************}

{**********WARNING *****************
 *The range 2900-2999 has been     *
 *reserved for Microsoft OEMs      *
 ***********************************}

// UNUSED BASE+0
// UNUSED BASE+1
  NERR_NetNotStarted = (NERR_BASE+2); // The workstation driver is not installed.
  {$EXTERNALSYM NERR_NetNotStarted}
  NERR_UnknownServer = (NERR_BASE+3); // The server could not be located.
  {$EXTERNALSYM NERR_UnknownServer}
  NERR_ShareMem      = (NERR_BASE+4); // An internal error occurred.  The network cannot access a shared memory segment.
  {$EXTERNALSYM NERR_ShareMem}

  NERR_NoNetworkResource = (NERR_BASE+5); // A network resource shortage occurred .
  {$EXTERNALSYM NERR_NoNetworkResource}
  NERR_RemoteOnly        = (NERR_BASE+6); // This operation is not supported on workstations.
  {$EXTERNALSYM NERR_RemoteOnly}
  NERR_DevNotRedirected  = (NERR_BASE+7); // The device is not connected.
  {$EXTERNALSYM NERR_DevNotRedirected}
// NERR_BASE+8 is used for ERROR_CONNECTED_OTHER_PASSWORD
// NERR_BASE+9 is used for ERROR_CONNECTED_OTHER_PASSWORD_DEFAULT
// UNUSED BASE+10
// UNUSED BASE+11
// UNUSED BASE+12
// UNUSED BASE+13
  NERR_ServerNotStarted = (NERR_BASE+14); // The Server service is not started.
  {$EXTERNALSYM NERR_ServerNotStarted}
  NERR_ItemNotFound     = (NERR_BASE+15); // The queue is empty.
  {$EXTERNALSYM NERR_ItemNotFound}
  NERR_UnknownDevDir    = (NERR_BASE+16); // The device or directory does not exist.
  {$EXTERNALSYM NERR_UnknownDevDir}
  NERR_RedirectedPath   = (NERR_BASE+17); // The operation is invalid on a redirected resource.
  {$EXTERNALSYM NERR_RedirectedPath}
  NERR_DuplicateShare   = (NERR_BASE+18); // The name has already been shared.
  {$EXTERNALSYM NERR_DuplicateShare}
  NERR_NoRoom           = (NERR_BASE+19); // The server is currently out of the requested resource.
  {$EXTERNALSYM NERR_NoRoom}
// UNUSED BASE+20
  NERR_TooManyItems    = (NERR_BASE+21); // Requested addition of items exceeds the maximum allowed.
  {$EXTERNALSYM NERR_TooManyItems}
  NERR_InvalidMaxUsers = (NERR_BASE+22); // The Peer service supports only two simultaneous users.
  {$EXTERNALSYM NERR_InvalidMaxUsers}
  NERR_BufTooSmall     = (NERR_BASE+23); // The API return buffer is too small.
  {$EXTERNALSYM NERR_BufTooSmall}
// UNUSED BASE+24
// UNUSED BASE+25
// UNUSED BASE+26
  NERR_RemoteErr = (NERR_BASE+27); // A remote API error occurred.
  {$EXTERNALSYM NERR_RemoteErr}
// UNUSED BASE+28
// UNUSED BASE+29
// UNUSED BASE+30
  NERR_LanmanIniError = (NERR_BASE+31); // An error occurred when opening or reading the configuration file.
  {$EXTERNALSYM NERR_LanmanIniError}
// UNUSED BASE+32
// UNUSED BASE+33
// UNUSED BASE+34
// UNUSED BASE+35
  NERR_NetworkError           = (NERR_BASE+36); // A general network error occurred.
  {$EXTERNALSYM NERR_NetworkError}
  NERR_WkstaInconsistentState = (NERR_BASE+37);
  {$EXTERNALSYM NERR_WkstaInconsistentState}
    // The Workstation service is in an inconsistent state. Restart the computer before restarting the Workstation service.
  NERR_WkstaNotStarted   = (NERR_BASE+38); // The Workstation service has not been started.
  {$EXTERNALSYM NERR_WkstaNotStarted}
  NERR_BrowserNotStarted = (NERR_BASE+39); // The requested information is not available.
  {$EXTERNALSYM NERR_BrowserNotStarted}
  NERR_InternalError     = (NERR_BASE+40); // An internal Windows 2000 error occurred.
  {$EXTERNALSYM NERR_InternalError}
  NERR_BadTransactConfig = (NERR_BASE+41); // The server is not configured for transactions.
  {$EXTERNALSYM NERR_BadTransactConfig}
  NERR_InvalidAPI        = (NERR_BASE+42); // The requested API is not supported on the remote server.
  {$EXTERNALSYM NERR_InvalidAPI}
  NERR_BadEventName      = (NERR_BASE+43); // The event name is invalid.
  {$EXTERNALSYM NERR_BadEventName}
  NERR_DupNameReboot     = (NERR_BASE+44); // The computer name already exists on the network. Change it and restart the computer.
  {$EXTERNALSYM NERR_DupNameReboot}

//
//      Config API related
//              Error codes from BASE+45 to BASE+49


// UNUSED BASE+45
  NERR_CfgCompNotFound  = (NERR_BASE+46); // The specified component could not be found in the configuration information.
  {$EXTERNALSYM NERR_CfgCompNotFound}
  NERR_CfgParamNotFound = (NERR_BASE+47); // The specified parameter could not be found in the configuration information.
  {$EXTERNALSYM NERR_CfgParamNotFound}
  NERR_LineTooLong = (NERR_BASE+49); // A line in the configuration file is too long.
  {$EXTERNALSYM NERR_LineTooLong}

//
//      Spooler API related
//              Error codes from BASE+50 to BASE+79


  NERR_QNotFound        = (NERR_BASE+50); // The printer does not exist.
  {$EXTERNALSYM NERR_QNotFound}
  NERR_JobNotFound      = (NERR_BASE+51); // The print job does not exist.
  {$EXTERNALSYM NERR_JobNotFound}
  NERR_DestNotFound     = (NERR_BASE+52); // The printer destination cannot be found.
  {$EXTERNALSYM NERR_DestNotFound}
  NERR_DestExists       = (NERR_BASE+53); // The printer destination already exists.
  {$EXTERNALSYM NERR_DestExists}
  NERR_QExists          = (NERR_BASE+54); // The printer queue already exists.
  {$EXTERNALSYM NERR_QExists}
  NERR_QNoRoom          = (NERR_BASE+55); // No more printers can be added.
  {$EXTERNALSYM NERR_QNoRoom}
  NERR_JobNoRoom        = (NERR_BASE+56); // No more print jobs can be added.
  {$EXTERNALSYM NERR_JobNoRoom}
  NERR_DestNoRoom       = (NERR_BASE+57); // No more printer destinations can be added.
  {$EXTERNALSYM NERR_DestNoRoom}
  NERR_DestIdle         = (NERR_BASE+58); // This printer destination is idle and cannot accept control operations.
  {$EXTERNALSYM NERR_DestIdle}
  NERR_DestInvalidOp    = (NERR_BASE+59); // This printer destination request contains an invalid control function.
  {$EXTERNALSYM NERR_DestInvalidOp}
  NERR_ProcNoRespond    = (NERR_BASE+60); // The print processor is not responding.
  {$EXTERNALSYM NERR_ProcNoRespond}
  NERR_SpoolerNotLoaded = (NERR_BASE+61); // The spooler is not running.
  {$EXTERNALSYM NERR_SpoolerNotLoaded}
  NERR_DestInvalidState = (NERR_BASE+62); // This operation cannot be performed on the print destination in its current state.
  {$EXTERNALSYM NERR_DestInvalidState}
  NERR_QInvalidState    = (NERR_BASE+63); // This operation cannot be performed on the printer queue in its current state.
  {$EXTERNALSYM NERR_QInvalidState}
  NERR_JobInvalidState  = (NERR_BASE+64); // This operation cannot be performed on the print job in its current state.
  {$EXTERNALSYM NERR_JobInvalidState}
  NERR_SpoolNoMemory    = (NERR_BASE+65); // A spooler memory allocation failure occurred.
  {$EXTERNALSYM NERR_SpoolNoMemory}
  NERR_DriverNotFound   = (NERR_BASE+66); // The device driver does not exist.
  {$EXTERNALSYM NERR_DriverNotFound}
  NERR_DataTypeInvalid  = (NERR_BASE+67); // The data type is not supported by the print processor.
  {$EXTERNALSYM NERR_DataTypeInvalid}
  NERR_ProcNotFound     = (NERR_BASE+68); // The print processor is not installed.
  {$EXTERNALSYM NERR_ProcNotFound}

//
//      Service API related
//              Error codes from BASE+80 to BASE+99


  NERR_ServiceTableLocked  = (NERR_BASE+80); // The service database is locked.
  {$EXTERNALSYM NERR_ServiceTableLocked}
  NERR_ServiceTableFull    = (NERR_BASE+81); // The service table is full.
  {$EXTERNALSYM NERR_ServiceTableFull}
  NERR_ServiceInstalled    = (NERR_BASE+82); // The requested service has already been started.
  {$EXTERNALSYM NERR_ServiceInstalled}
  NERR_ServiceEntryLocked  = (NERR_BASE+83); // The service does not respond to control actions.
  {$EXTERNALSYM NERR_ServiceEntryLocked}
  NERR_ServiceNotInstalled = (NERR_BASE+84); // The service has not been started.
  {$EXTERNALSYM NERR_ServiceNotInstalled}
  NERR_BadServiceName      = (NERR_BASE+85); // The service name is invalid.
  {$EXTERNALSYM NERR_BadServiceName}
  NERR_ServiceCtlTimeout   = (NERR_BASE+86); // The service is not responding to the control function.
  {$EXTERNALSYM NERR_ServiceCtlTimeout}
  NERR_ServiceCtlBusy      = (NERR_BASE+87); // The service control is busy.
  {$EXTERNALSYM NERR_ServiceCtlBusy}
  NERR_BadServiceProgName  = (NERR_BASE+88); // The configuration file contains an invalid service program name.
  {$EXTERNALSYM NERR_BadServiceProgName}
  NERR_ServiceNotCtrl      = (NERR_BASE+89); // The service could not be controlled in its present state.
  {$EXTERNALSYM NERR_ServiceNotCtrl}
  NERR_ServiceKillProc     = (NERR_BASE+90); // The service ended abnormally.
  {$EXTERNALSYM NERR_ServiceKillProc}
  NERR_ServiceCtlNotValid  = (NERR_BASE+91); // The requested pause,continue, or stop is not valid for this service.
  {$EXTERNALSYM NERR_ServiceCtlNotValid}
  NERR_NotInDispatchTbl    = (NERR_BASE+92); // The service control dispatcher could not find the service name in the dispatch table.
  {$EXTERNALSYM NERR_NotInDispatchTbl}
  NERR_BadControlRecv      = (NERR_BASE+93); // The service control dispatcher pipe read failed.
  {$EXTERNALSYM NERR_BadControlRecv}
  NERR_ServiceNotStarting  = (NERR_BASE+94); // A thread for the new service could not be created.
  {$EXTERNALSYM NERR_ServiceNotStarting}

//
//      Wksta and Logon API related
//              Error codes from BASE+100 to BASE+118


  NERR_AlreadyLoggedOn   = (NERR_BASE+100); // This workstation is already logged on to the local-area network.
  {$EXTERNALSYM NERR_AlreadyLoggedOn}
  NERR_NotLoggedOn       = (NERR_BASE+101); // The workstation is not logged on to the local-area network.
  {$EXTERNALSYM NERR_NotLoggedOn}
  NERR_BadUsername       = (NERR_BASE+102); // The user name or group name parameter is invalid.
  {$EXTERNALSYM NERR_BadUsername}
  NERR_BadPassword       = (NERR_BASE+103); // The password parameter is invalid.
  {$EXTERNALSYM NERR_BadPassword}
  NERR_UnableToAddName_W = (NERR_BASE+104); // @W The logon processor did not add the message alias.
  {$EXTERNALSYM NERR_UnableToAddName_W}
  NERR_UnableToAddName_F = (NERR_BASE+105); // The logon processor did not add the message alias.
  {$EXTERNALSYM NERR_UnableToAddName_F}
  NERR_UnableToDelName_W = (NERR_BASE+106); // @W The logoff processor did not delete the message alias.
  {$EXTERNALSYM NERR_UnableToDelName_W}
  NERR_UnableToDelName_F = (NERR_BASE+107); // The logoff processor did not delete the message alias.
  {$EXTERNALSYM NERR_UnableToDelName_F}
// UNUSED BASE+108
  NERR_LogonsPaused        = (NERR_BASE+109); // Network logons are paused.
  {$EXTERNALSYM NERR_LogonsPaused}