axisflashmap.h

来自「this SRC packet is the headfiles that MI」· C头文件 代码 · 共 63 行

H
63
字号
#ifndef __ASM_AXISFLASHMAP_H#define __ASM_AXISFLASHMAP_H/* Bootblock parameters are stored at 0xc000 and has the FLASH_BOOT_MAGIC  * as start, it ends with 0xFFFFFFFF */#define FLASH_BOOT_MAGIC 0xbeefcace#define BOOTPARAM_OFFSET 0xc000/* apps/bootblocktool is used to read and write the parameters, * and it has nothing to do with the partition table.  *//* the partitiontable consists of some "jump over" code, a head and * then the actual entries. * tools/mkptable is used to generate the ptable.  *//* The partition table starts with code to "jump over" it.  The ba   instruction and delay-slot is modified elsewhere (for example the   mkptable script); don't change this to fill the delay-slot.  */#define PARTITIONTABLE_CODE_START { \ 0x0f, 0x05, /* nop 0 */\ 0x25, 0xf0, /* di  2 */\ 0xed, 0xff  /* ba  4 */ }/* The actual offset depend on the number of entries */#define PARTITIONTABLE_CODE_END { \ 0x00, 0x00, /* ba offset 6 */\ 0x0f, 0x05  /* nop 8 */}#define PARTITION_TABLE_OFFSET 10#define PARTITION_TABLE_MAGIC 0xbeef /* Not a good magic *//* The partitiontable_head is located at offset +10: */struct partitiontable_head {	__u16 magic; /* PARTITION_TABLE_MAGIC */ 	__u16 size;  /* Length of ptable block (not header) */	__u32 checksum; /* simple longword sum */};/* And followed by partition table entries */struct partitiontable_entry {	__u32 offset;   /* Offset is relative to the sector the ptable is in */	__u32 size;	__u32 checksum; /* simple longword sum */	__u16 type;	__u16 flags;   /* bit 0: ro/rw = 1/0 */	__u32 future0; /* 16 bytes reserved for future use */	__u32 future1;	__u32 future2;	__u32 future3;};/* ended by an end marker: */#define PARTITIONTABLE_END_MARKER 0xFFFFFFFF#define PARTITIONTABLE_END_MARKER_SIZE 4/*#define PARTITION_TYPE_RESCUE 0x0000?*/  /* Not used, maybe it should? */#define PARTITION_TYPE_PARAM  0x0001#define PARTITION_TYPE_KERNEL 0x0002#define PARTITION_TYPE_JFFS   0x0003#endif

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?