mca.h
来自「this SRC packet is the headfiles that MI」· C头文件 代码 · 共 148 行
H
148 行
/* * File: mca.h * Purpose: Machine check handling specific defines * * Copyright (C) 1999 Silicon Graphics, Inc. * Copyright (C) Vijay Chander (vijay@engr.sgi.com) * Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com) *//* XXX use this temporary define for MP systems trying to INIT */#undef SAL_MPINIT_WORKAROUND#ifndef _ASM_IA64_MCA_H#define _ASM_IA64_MCA_H#if !defined(__ASSEMBLY__)#include <linux/types.h>#include <asm/param.h>#include <asm/sal.h>#include <asm/processor.h>/* These are the return codes from all the IA64_MCA specific interfaces */typedef int ia64_mca_return_code_t;enum { IA64_MCA_SUCCESS = 0, IA64_MCA_FAILURE = 1};#define IA64_MCA_RENDEZ_TIMEOUT (100 * HZ) /* 1000 milliseconds */#define IA64_CMC_INT_DISABLE 0#define IA64_CMC_INT_ENABLE 1typedef u32 int_vector_t;typedef u64 millisec_t;typedef union cmcv_reg_u { u64 cmcv_regval; struct { u64 cmcr_vector : 8; u64 cmcr_reserved1 : 4; u64 cmcr_ignored1 : 1; u64 cmcr_reserved2 : 3; u64 cmcr_mask : 1; u64 cmcr_ignored2 : 47; } cmcv_reg_s;} cmcv_reg_t;#define cmcv_mask cmcv_reg_s.cmcr_mask#define cmcv_vector cmcv_reg_s.cmcr_vector#define IA64_MCA_UCMC_HANDLER_SIZE 0x10#define IA64_INIT_HANDLER_SIZE 0x10enum { IA64_MCA_RENDEZ_CHECKIN_NOTDONE = 0x0, IA64_MCA_RENDEZ_CHECKIN_DONE = 0x1};/* Information maintained by the MC infrastructure */typedef struct ia64_mc_info_s { u64 imi_mca_handler; size_t imi_mca_handler_size; u64 imi_monarch_init_handler; size_t imi_monarch_init_handler_size; u64 imi_slave_init_handler; size_t imi_slave_init_handler_size; u8 imi_rendez_checkin[NR_CPUS];} ia64_mc_info_t;/* Possible rendez states passed from SAL to OS during MCA * handoff */enum { IA64_MCA_RENDEZ_NOT_RQD = 0x0, IA64_MCA_RENDEZ_DONE_WITHOUT_INIT = 0x1, IA64_MCA_RENDEZ_DONE_WITH_INIT = 0x2, IA64_MCA_RENDEZ_FAILURE = -1};typedef struct ia64_mca_sal_to_os_state_s { u64 imsto_os_gp; /* GP of the os registered with the SAL */ u64 imsto_pal_proc; /* PAL_PROC entry point - physical addr */ u64 imsto_sal_proc; /* SAL_PROC entry point - physical addr */ u64 imsto_sal_gp; /* GP of the SAL - physical */ u64 imsto_rendez_state; /* Rendez state information */ u64 imsto_sal_check_ra; /* Return address in SAL_CHECK while going * back to SAL from OS after MCA handling. */} ia64_mca_sal_to_os_state_t;enum { IA64_MCA_CORRECTED = 0x0, /* Error has been corrected by OS_MCA */ IA64_MCA_WARM_BOOT = -1, /* Warm boot of the system need from SAL */ IA64_MCA_COLD_BOOT = -2, /* Cold boot of the system need from SAL */ IA64_MCA_HALT = -3 /* System to be halted by SAL */};typedef struct ia64_mca_os_to_sal_state_s { u64 imots_os_status; /* OS status to SAL as to what happened * with the MCA handling. */ u64 imots_sal_gp; /* GP of the SAL - physical */ u64 imots_new_min_state; /* Pointer to structure containing * new values of registers in the min state * save area. */ u64 imots_sal_check_ra; /* Return address in SAL_CHECK while going * back to SAL from OS after MCA handling. */} ia64_mca_os_to_sal_state_t;typedef int (*prfunc_t)(const char * fmt, ...);extern void ia64_mca_init(void);extern void ia64_os_mca_dispatch(void);extern void ia64_os_mca_dispatch_end(void);extern void ia64_mca_ucmc_handler(void);extern void ia64_monarch_init_handler(void);extern void ia64_slave_init_handler(void);extern void ia64_mca_rendez_int_handler(int,void *,struct pt_regs *);extern void ia64_mca_wakeup_int_handler(int,void *,struct pt_regs *);extern void ia64_mca_cmc_int_handler(int,void *,struct pt_regs *);extern void ia64_mca_cpe_int_handler(int,void *,struct pt_regs *);extern void ia64_log_print(int,prfunc_t);extern void ia64_mca_cmc_vector_setup(void);extern void ia64_mca_check_errors( void );extern u64 ia64_log_get(int, prfunc_t);#define PLATFORM_CALL(fn, args) printk("Platform call TBD\n")#undef MCA_TEST#undef IA64_MCA_DEBUG_INFO#if defined(IA64_MCA_DEBUG_INFO)# define IA64_MCA_DEBUG(fmt...) printk(fmt)#else# define IA64_MCA_DEBUG(fmt...)#endif#endif /* !__ASSEMBLY__ */#endif /* _ASM_IA64_MCA_H */
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?