toptop.fit

这是一个信号发生器得程序

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 08/23/2008 08:57:45      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "toptop"
BEGIN

    DEVICE = "EP1K30QC208-3";

    "clk"                          : INPUT_PIN  = 14     ;
    "clk0"                         : INPUT_PIN  = 199    ;
    "clk1"                         : INPUT_PIN  = 15     ;
    "datain0"                      : INPUT_PIN  = 208    ;
    "datain1"                      : INPUT_PIN  = 207    ;
    "datain2"                      : INPUT_PIN  = 206    ;
    "datain3"                      : INPUT_PIN  = 205    ;
    "datain4"                      : INPUT_PIN  = 204    ;
    "datain5"                      : INPUT_PIN  = 203    ;
    "datain6"                      : INPUT_PIN  = 202    ;
    "datain7"                      : INPUT_PIN  = 200    ;
    "rden"                         : INPUT_PIN  = 13     ;
    "rest"                         : INPUT_PIN  = 12     ;
    "wren"                         : INPUT_PIN  = 11     ;
    "dout"                         : OUTPUT_PIN = 9      ;
    "zhongduan"                    : OUTPUT_PIN = 8      ;
    "|bingxingru:4|:38"            : LOCATION   = LC1_B27;  -- |bingxingru:4|data7
    "|bingxingru:4|:39"            : LOCATION   = LC8_B27;  -- |bingxingru:4|data6
    "|bingxingru:4|:40"            : LOCATION   = LC7_B27;  -- |bingxingru:4|data5
    "|bingxingru:4|:41"            : LOCATION   = LC6_B27;  -- |bingxingru:4|data4
    "|bingxingru:4|:42"            : LOCATION   = LC5_B27;  -- |bingxingru:4|data3
    "|bingxingru:4|:43"            : LOCATION   = LC4_B27;  -- |bingxingru:4|data2
    "|bingxingru:4|:44"            : LOCATION   = LC3_B27;  -- |bingxingru:4|data1
    "|bingxingru:4|:45"            : LOCATION   = LC2_B27;  -- |bingxingru:4|data0
    "|bingxingru:4|:50"            : LOCATION   = LC4_B32;
    "|diziduqu:6|lpm_add_sub:37|addcore:adder|:87" : LOCATION   = LC5_E7 ;
    "|diziduqu:6|lpm_add_sub:37|addcore:adder|:91" : LOCATION   = LC7_E7 ;
    "|diziduqu:6|lpm_add_sub:37|addcore:adder|:99" : LOCATION   = LC2_E7 ;
    "|diziduqu:6|lpm_add_sub:37|addcore:adder|:103" : LOCATION   = LC7_E12;
    "|diziduqu:6|lpm_add_sub:37|addcore:adder|:111" : LOCATION   = LC5_E12;
    "|diziduqu:6|:15"              : LOCATION   = LC4_E12;
    "|diziduqu:6|:16"              : LOCATION   = LC2_E12;
    "|diziduqu:6|:17"              : LOCATION   = LC8_E12;
    "|diziduqu:6|:18"              : LOCATION   = LC6_E12;
    "|diziduqu:6|:19"              : LOCATION   = LC3_E12;
    "|diziduqu:6|:20"              : LOCATION   = LC8_E7 ;
    "|diziduqu:6|:21"              : LOCATION   = LC6_E7 ;
    "|diziduqu:6|:22"              : LOCATION   = LC3_E7 ;
    "|diziduqu:6|:23"              : LOCATION   = LC1_E7 ;
    "|diziduqu:6|:24"              : LOCATION   = LC4_E7 ;
    "|diziduqu:6|:25"              : LOCATION   = LC1_E12;
    "|dizishengcheng:3|lpm_add_sub:54|addcore:adder|:83" : LOCATION   = LC2_A9 ;
    "|dizishengcheng:3|lpm_add_sub:54|addcore:adder|:91" : LOCATION   = LC5_A6 ;
    "|dizishengcheng:3|lpm_add_sub:54|addcore:adder|:95" : LOCATION   = LC2_A6 ;
    "|dizishengcheng:3|lpm_add_sub:54|addcore:adder|:99" : LOCATION   = LC7_A6 ;
    "|dizishengcheng:3|lpm_add_sub:54|addcore:adder|:107" : LOCATION   = LC5_A18;
    "|dizishengcheng:3|lpm_add_sub:54|addcore:adder|:111" : LOCATION   = LC7_A18;
    "|dizishengcheng:3|:16"        : LOCATION   = LC1_A18;
    "|dizishengcheng:3|:17"        : LOCATION   = LC3_A18;
    "|dizishengcheng:3|:18"        : LOCATION   = LC6_A18;
    "|dizishengcheng:3|:19"        : LOCATION   = LC4_A6 ;
    "|dizishengcheng:3|:20"        : LOCATION   = LC4_A18;
    "|dizishengcheng:3|:21"        : LOCATION   = LC1_A6 ;
    "|dizishengcheng:3|:22"        : LOCATION   = LC8_A6 ;
    "|dizishengcheng:3|:23"        : LOCATION   = LC6_A6 ;
    "|dizishengcheng:3|:24"        : LOCATION   = LC3_A6 ;
    "|dizishengcheng:3|:25"        : LOCATION   = LC1_A9 ;
    "|dizishengcheng:3|:26"        : LOCATION   = LC4_A9 ;
    "|dizishengcheng:3|:38"        : LOCATION   = LC8_A18;
    "|dizishengcheng:3|:52"        : LOCATION   = LC2_A18;
    "rest~1"                       : LOCATION   = LC1_B32;
    "|ram:5|altdpram:altdpram_component|segment0_0" : LOCATION   = EC9_C  ;
    "|ram:5|altdpram:altdpram_component|segment0_1" : LOCATION   = EC9_A  ;
    "|ram:5|altdpram:altdpram_component|segment0_2" : LOCATION   = EC1_A  ;
    "|ram:5|altdpram:altdpram_component|segment0_3" : LOCATION   = EC9_B  ;
    "|ram:5|altdpram:altdpram_component|segment0_4" : LOCATION   = EC1_B  ;
    "|ram:5|altdpram:altdpram_component|segment0_5" : LOCATION   = EC9_E  ;
    "|ram:5|altdpram:altdpram_component|segment0_6" : LOCATION   = EC1_E  ;
    "|ram:5|altdpram:altdpram_component|segment0_7" : LOCATION   = EC1_C  ;

END;