map.a

s3c2410,WinCE的完整BSP包,包含bootloader,driver:atapi,CANBus,CS8900,LCD,flash,USB,touch,

;      TITLE("P2 Firmware Initialization")
;++
;
; Copyright (c) 2001. Samsung Electronics, co. ltd  All rights reserved.
;
; Module Name:
;
;    map920.h
;
; Abstract:
;
;   This module contains the OEM memory map for the S3c2410
;
;--


;
; OEMAddressTable defines the mapping from the 4GB physical address space
; to the kernel's 512MB "un-mapped" spaces.  The kernel will create two ranges
; of virtual addresses from this table. One from 0x80000000 to 0x9FFFFFFF which
; has caching & buffering enabled and one from 0xA0000000 to 0xBFFFFFFF which
; has the cache & buffering disabled.
;
; Each entry in the table consists of the Virtual Base Address to map to,
; the Physical Base Address to map from, and the number of megabytes to map.
;
; The order of the entries is arbitrary, but DRAM should be placed first for
; optimal performance. The table is zero-terminated, so the last entry MUST
; be all zeroes.
;
	
; Mapped for S3C2400X01

    EXPORT      OEMAddressTable[DATA]

OEMAddressTable
    ;;;-------------------------------------------------------------
    ;;; Virt Addr   Phys Addr   MB
    ;;;-------------------------------------------------------------
    DCD 0x80000000, 0x02000000, 30  ; 30 MB SROM(SRAM/ROM) BANK 0
    DCD 0x82000000, 0x08000000, 32  ; 32 MB SROM(SRAM/ROM) BANK 1
    DCD 0x84000000, 0x10000000, 32  ; 32 MB SROM(SRAM/ROM) BANK 2
    DCD 0x86000000, 0x18000000, 32  ; 32 MB SROM(SRAM/ROM) BANK 3
    DCD 0x88000000, 0x20000000, 32  ; 32 MB SROM(SRAM/ROM) BANK 4
    DCD 0x8A000000, 0x28000000, 32  ; 32 MB SROM(SRAM/ROM) BANK 5
    DCD 0x8C000000, 0x30000000, 64  ; 64 MB DRAM BANK 0,1
    DCD 0x90800000, 0x48000000,  1  ; Memory control register
    DCD 0x90900000, 0x49000000,  1  ; USB Host register
    DCD 0x90A00000, 0x4A000000,  1  ; Interrupt Control register
    DCD 0x90B00000, 0x4B000000,  1  ; DMA control register
    DCD 0x90C00000, 0x4C000000,  1  ; Clock & Power register
    DCD 0x90D00000, 0x4D000000,  1  ; LCD control register
    DCD 0x90E00000, 0x4E000000,  1  ; NAND flash control register
    DCD 0x91000000, 0x50000000,  1  ; UART control register
    DCD 0x91100000, 0x51000000,  1  ; PWM timer register
    DCD 0x91200000, 0x52000000,  1  ; USB device register
    DCD 0x91300000, 0x53000000,  1  ; Watchdog Timer register
    DCD 0x91400000, 0x54000000,  1  ; IIC control register
    DCD 0x91500000, 0x55000000,  1  ; IIS control register
    DCD 0x91600000, 0x56000000,  1  ; I/O Port register
    DCD 0x91700000, 0x57000000,  1  ; RTC control register
    DCD 0x91800000, 0x58000000,  1  ; A/D convert register
    DCD 0x91900000, 0x59000000,  1  ; SPI register
    DCD 0x91A00000, 0x5A000000,  1  ; SD Interface register
	  DCD 0x92000000, 0x00000000,  2  ;  2 MB SROM(SRAM/ROM) BANK 0
    DCD 0x00000000, 0x00000000,  0  ; End of Table (MB MUST BE ZERO!)

    END