📄 bn_lcl.h
字号:
* * <appro@fy.chalmers.se> */# if defined(__alpha) && (defined(SIXTY_FOUR_BIT_LONG) || defined(SIXTY_FOUR_BIT))# if defined(__DECC)# include <c_asm.h># define BN_UMULT_HIGH(a,b) (BN_ULONG)asm("umulh %a0,%a1,%v0",(a),(b))# elif defined(__GNUC__)# define BN_UMULT_HIGH(a,b) ({ \ register BN_ULONG ret; \ asm ("umulh %1,%2,%0" \ : "=r"(ret) \ : "r"(a), "r"(b)); \ ret; })# endif /* compiler */# elif defined(_ARCH_PPC) && defined(__64BIT__) && defined(SIXTY_FOUR_BIT_LONG)# if defined(__GNUC__)# define BN_UMULT_HIGH(a,b) ({ \ register BN_ULONG ret; \ asm ("mulhdu %0,%1,%2" \ : "=r"(ret) \ : "r"(a), "r"(b)); \ ret; })# endif /* compiler */# elif defined(__x86_64) && defined(SIXTY_FOUR_BIT_LONG)# if defined(__GNUC__)# define BN_UMULT_HIGH(a,b) ({ \ register BN_ULONG ret,discard; \ asm ("mulq %3" \ : "=a"(discard),"=d"(ret) \ : "a"(a), "g"(b) \ : "cc"); \ ret; })# define BN_UMULT_LOHI(low,high,a,b) \ asm ("mulq %3" \ : "=a"(low),"=d"(high) \ : "a"(a),"g"(b) \ : "cc");# endif# endif /* cpu */#endif /* OPENSSL_NO_ASM *//************************************************************* * Using the long long type */#define Lw(t) (((BN_ULONG)(t))&BN_MASK2)#define Hw(t) (((BN_ULONG)((t)>>BN_BITS2))&BN_MASK2)/* This is used for internal error checking and is not normally used */#ifdef BN_DEBUG# include <assert.h># define bn_check_top(a) assert ((a)->top >= 0 && (a)->top <= (a)->dmax);#else# define bn_check_top(a)#endif/* This macro is to add extra stuff for development checking */#ifdef BN_DEBUG#define bn_set_max(r) ((r)->max=(r)->top,BN_set_flags((r),BN_FLG_STATIC_DATA))#else#define bn_set_max(r)#endif/* These macros are used to 'take' a section of a bignum for read only use */#define bn_set_low(r,a,n) \ { \ (r)->top=((a)->top > (n))?(n):(a)->top; \ (r)->d=(a)->d; \ (r)->neg=(a)->neg; \ (r)->flags|=BN_FLG_STATIC_DATA; \ bn_set_max(r); \ }#define bn_set_high(r,a,n) \ { \ if ((a)->top > (n)) \ { \ (r)->top=(a)->top-n; \ (r)->d= &((a)->d[n]); \ } \ else \ (r)->top=0; \ (r)->neg=(a)->neg; \ (r)->flags|=BN_FLG_STATIC_DATA; \ bn_set_max(r); \ }#ifdef BN_LLONG#define mul_add(r,a,w,c) { \ BN_ULLONG t; \ t=(BN_ULLONG)w * (a) + (r) + (c); \ (r)= Lw(t); \ (c)= Hw(t); \ }#define mul(r,a,w,c) { \ BN_ULLONG t; \ t=(BN_ULLONG)w * (a) + (c); \ (r)= Lw(t); \ (c)= Hw(t); \ }#define sqr(r0,r1,a) { \ BN_ULLONG t; \ t=(BN_ULLONG)(a)*(a); \ (r0)=Lw(t); \ (r1)=Hw(t); \ }#elif defined(BN_UMULT_HIGH)#define mul_add(r,a,w,c) { \ BN_ULONG high,low,ret,tmp=(a); \ ret = (r); \ high= BN_UMULT_HIGH(w,tmp); \ ret += (c); \ low = (w) * tmp; \ (c) = (ret<(c))?1:0; \ (c) += high; \ ret += low; \ (c) += (ret<low)?1:0; \ (r) = ret; \ }#define mul(r,a,w,c) { \ BN_ULONG high,low,ret,ta=(a); \ low = (w) * ta; \ high= BN_UMULT_HIGH(w,ta); \ ret = low + (c); \ (c) = high; \ (c) += (ret<low)?1:0; \ (r) = ret; \ }#define sqr(r0,r1,a) { \ BN_ULONG tmp=(a); \ (r0) = tmp * tmp; \ (r1) = BN_UMULT_HIGH(tmp,tmp); \ }#else/************************************************************* * No long long type */#define LBITS(a) ((a)&BN_MASK2l)#define HBITS(a) (((a)>>BN_BITS4)&BN_MASK2l)#define L2HBITS(a) (((a)<<BN_BITS4)&BN_MASK2)#define LLBITS(a) ((a)&BN_MASKl)#define LHBITS(a) (((a)>>BN_BITS2)&BN_MASKl)#define LL2HBITS(a) ((BN_ULLONG)((a)&BN_MASKl)<<BN_BITS2)#define mul64(l,h,bl,bh) \ { \ BN_ULONG m,m1,lt,ht; \ \ lt=l; \ ht=h; \ m =(bh)*(lt); \ lt=(bl)*(lt); \ m1=(bl)*(ht); \ ht =(bh)*(ht); \ m=(m+m1)&BN_MASK2; if (m < m1) ht+=L2HBITS((BN_ULONG)1); \ ht+=HBITS(m); \ m1=L2HBITS(m); \ lt=(lt+m1)&BN_MASK2; if (lt < m1) ht++; \ (l)=lt; \ (h)=ht; \ }#define sqr64(lo,ho,in) \ { \ BN_ULONG l,h,m; \ \ h=(in); \ l=LBITS(h); \ h=HBITS(h); \ m =(l)*(h); \ l*=l; \ h*=h; \ h+=(m&BN_MASK2h1)>>(BN_BITS4-1); \ m =(m&BN_MASK2l)<<(BN_BITS4+1); \ l=(l+m)&BN_MASK2; if (l < m) h++; \ (lo)=l; \ (ho)=h; \ }#define mul_add(r,a,bl,bh,c) { \ BN_ULONG l,h; \ \ h= (a); \ l=LBITS(h); \ h=HBITS(h); \ mul64(l,h,(bl),(bh)); \ \ /* non-multiply part */ \ l=(l+(c))&BN_MASK2; if (l < (c)) h++; \ (c)=(r); \ l=(l+(c))&BN_MASK2; if (l < (c)) h++; \ (c)=h&BN_MASK2; \ (r)=l; \ }#define mul(r,a,bl,bh,c) { \ BN_ULONG l,h; \ \ h= (a); \ l=LBITS(h); \ h=HBITS(h); \ mul64(l,h,(bl),(bh)); \ \ /* non-multiply part */ \ l+=(c); if ((l&BN_MASK2) < (c)) h++; \ (c)=h&BN_MASK2; \ (r)=l&BN_MASK2; \ }#endif /* !BN_LLONG */void bn_mul_normal(BN_ULONG *r,BN_ULONG *a,int na,BN_ULONG *b,int nb);void bn_mul_comba8(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b);void bn_mul_comba4(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b);void bn_sqr_normal(BN_ULONG *r, const BN_ULONG *a, int n, BN_ULONG *tmp);void bn_sqr_comba8(BN_ULONG *r,const BN_ULONG *a);void bn_sqr_comba4(BN_ULONG *r,const BN_ULONG *a);int bn_cmp_words(const BN_ULONG *a,const BN_ULONG *b,int n);int bn_cmp_part_words(const BN_ULONG *a, const BN_ULONG *b, int cl, int dl);#ifdef BN_RECURSIONvoid bn_mul_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2, BN_ULONG *t);void bn_mul_part_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int tn, int n, BN_ULONG *t);void bn_mul_low_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2, BN_ULONG *t);void bn_mul_high(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,BN_ULONG *l,int n2, BN_ULONG *t);void bn_sqr_recursive(BN_ULONG *r,const BN_ULONG *a, int n2, BN_ULONG *t);#endifvoid bn_mul_low_normal(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b, int n);#ifdef __cplusplus}#endif#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -