📄 main.c
字号:
#include "option.h"
#include "def.h"
#include "44b.h"
#include "44blib.h"
void Isr_Init(void);
void HaltUndef(void);
void HaltSwi(void);
void HaltPabort(void);
void HaltDabort(void);
void Main(void)
{
U8 which_key;
rSYSCFG=SYSCFG_8KB;
#if (PLLON==1)
ChangePllValue(PLL_M,PLL_P,PLL_S);
#endif
Isr_Init();
Port_Init();
Uart_Init(0,115200);
Uart_Select(0);
rPCONG=0x00ff; //EINT7~0
rPUPG=0x0; //pull up enable
Delay(0); //calibrate Delay()
Led_Display(7);
Delay(1000); //calibrate Delay()
Led_Display(0);
Delay(5000); //calibrate Delay()
Led_Display(7);
Uart_Printf("\n start \n");
while(1)
{
while((rPDATG & 0xf0)==0xf0);
which_key=rPDATG&0xf0;
switch(which_key)
{
case 0xe0:
Led_Display(0x1);
break;
case 0xd0:
Led_Display(0x2);
break;
case 0xb0:
Led_Display(0x4);
break;
case 0x70:
Led_Display(0x7);
break;
default :
break;
}
}
}
void Isr_Init(void)
{
U32 i;
pISR_UNDEF=(unsigned)HaltUndef;
pISR_SWI =(unsigned)HaltSwi;
pISR_PABORT=(unsigned)HaltPabort;
pISR_DABORT=(unsigned)HaltDabort;
for(i=_RAM_STARTADDRESS;i<(_RAM_STARTADDRESS+0x20);i+=4)
{
*((volatile unsigned *)i)=0xEA000000+0x1FFE;
}
rINTCON=0x5; // Non-vectored,IRQ enable,FIQ disable
rINTMOD=0x0; // All=IRQ mode
rINTMSK|=BIT_GLOBAL|BIT_EINT3; // All interrupt is masked.
}
void HaltUndef(void)
{
Uart_Printf("Undefined instruction exception!!!\n");
while(1);
}
void HaltSwi(void)
{
Uart_Printf("SWI exception!!!\n");
while(1);
}
void HaltPabort(void)
{
Uart_Printf("Pabort exception!!!\n");
while(1);
}
void HaltDabort(void)
{
Uart_Printf("Dabort exception!!!\n");
while(1);
}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -