makefile.in

硬盘各项性能的测试,如温度容量版本健康度型号

mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
os_deps = @os_deps@
os_libs = @os_libs@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
releaseversion = @releaseversion@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
smartd_suffix = @smartd_suffix@
smartmontools_release_date = @smartmontools_release_date@
smartmontools_release_time = @smartmontools_release_time@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@

# Make sure .cpp takes precedence to avoid compiling old .c file
SUFFIXES = .cpp .c .s .o
AM_CPPFLAGS = -DSMARTMONTOOLS_SYSCONFDIR=\"$(sysconfdir)\"
smartd_SOURCES = smartd.cpp smartd.h atacmdnames.cpp atacmdnames.h \
	atacmds.cpp atacmds.h ataprint.cpp ataprint.h extern.h int64.h \
	knowndrives.cpp knowndrives.h scsicmds.cpp scsicmds.h \
	scsiata.cpp scsiata.h scsiprint.cpp scsiprint.h utility.cpp \
	utility.h $(am__append_1)
smartd_LDADD = @os_deps@ @os_libs@
smartd_DEPENDENCIES = @os_deps@
EXTRA_smartd_SOURCES = os_darwin.cpp os_darwin.h os_linux.cpp \
	os_linux.h os_freebsd.cpp os_freebsd.h os_netbsd.cpp \
	os_netbsd.h os_openbsd.cpp os_openbsd.h os_solaris.cpp \
	os_solaris.h os_solaris_ata.s os_win32.cpp os_generic.cpp \
	os_generic.h cciss.cpp cciss.h $(am__append_2)
smartctl_SOURCES = smartctl.cpp smartctl.h atacmdnames.cpp \
	atacmdnames.h atacmds.cpp atacmds.h ataprint.cpp ataprint.h \
	extern.h int64.h knowndrives.cpp knowndrives.h scsicmds.cpp \
	scsicmds.h scsiata.cpp scsiata.h scsiprint.cpp scsiprint.h \
	utility.cpp utility.h $(am__append_3)
smartctl_LDADD = @os_deps@ @os_libs@
smartctl_DEPENDENCIES = @os_deps@
EXTRA_smartctl_SOURCES = os_linux.cpp os_linux.h os_freebsd.cpp \
	os_freebsd.h os_netbsd.cpp os_netbsd.h os_openbsd.cpp \
	os_openbsd.h os_solaris.cpp os_solaris.h os_win32.cpp \
	os_generic.cpp os_generic.h cciss.cpp cciss.h $(am__append_4)

# This block is required because Solaris uses manual page section 1m
# for administrative command (linux/freebsd use section 8) and Solaris
# uses manual page section 4 for file formats (linux/freebsd use
# section 5).  Automake can deal cleanly with man page sections 1-8
# and n, but NOT with sections of the form 1m.
@OS_SOLARIS_TRUE@extra_MANS = smartd.conf.4 \
@OS_SOLARIS_TRUE@                  smartctl.1m   \
@OS_SOLARIS_TRUE@                  smartd.1m

# For systems that adopts traditional manner
@OS_SOLARIS_FALSE@man_MANS = smartd.conf.5 \
@OS_SOLARIS_FALSE@                  smartctl.8    \
@OS_SOLARIS_FALSE@                  smartd.8

docsdir = $(docdir)
docs_DATA = AUTHORS     \
            CHANGELOG   \
            COPYING     \
            INSTALL     \
            NEWS        \
            README      \
            TODO        \
            WARNINGS    \
            smartd.conf

sysconf_DATA = smartd.conf$(smartd_suffix)
EXTRA_DIST = smartmontools.spec                    \
             smartd.initd.in                       \
             smartd.8.in                           \
             smartctl.8.in                         \
             smartd.conf.5.in                      \
             smartd.conf                           \
             autogen.sh                            \
             os_darwin/SMART.in                    \
             os_darwin/StartupParameters.plist     \
             os_darwin/English_Localizable.strings \
             os_win32/installer.nsi                \
             $(docs_DATA)

CLEANFILES = smartd.conf.5 smartd.conf.4 smartd.8 smartd.1m \
	smartd.8.html smartd.8.txt smartctl.8 smartctl.1m \
	smartctl.8.html smartctl.8.txt smartd.conf.5.html \
	smartd.conf.5.txt smartd.initd SMART $(am__append_5) \
	$(am__append_6)
@OS_DARWIN_FALSE@initd_DATA = smartd.initd
@OS_DARWIN_TRUE@initd_DATA = SMART                            \
@OS_DARWIN_TRUE@	os_darwin/StartupParameters.plist     \
@OS_DARWIN_TRUE@	os_darwin/English_Localizable.strings

@OS_DARWIN_FALSE@initd_install_name = smartd$(smartd_suffix)
@OS_DARWIN_TRUE@initd_install_name = SMART
@OS_DARWIN_FALSE@initd_DATA_install = install-initdDATA-generic
@OS_DARWIN_TRUE@initd_DATA_install = install-initdDATA-darwin

# Commands to convert man pages into .html and .txt
# TODO: configure
MAN2HTML = man2html
#MAN2HTML = groff -man -Thtml
MAN2TXT = groff -man -Tascii -P'-bcou'

# Remove HTTP header and fix links in man2html output
FIXHTML = sed '1s,^Content-type.*,,' \
        | sed 's,<A HREF="http://[-a-z/]*/man2html?\([1-8]\)+\(smart[cd][.a-z]*\)">,<A HREF="\2.\1.html">,g' \
        | sed 's,<A HREF="http://[-a-z/]*/man2html">,<A HREF=".">,g' \
        | sed 's,<A HREF="http://[-a-z/]*/man2html?[^"]*">\([^<]*\)</A>,\1,g' \
        | sed 's,<A HREF="mailto:[^s][^m][^a][^"]*">\([^<]*\)</A>,\1,g'


# Definitions for Windows distribution
@OS_WIN32_MINGW_TRUE@distdir_win32 = $(PACKAGE)-$(VERSION).win32
@OS_WIN32_MINGW_TRUE@distzip_win32 = $(PACKAGE)-$(VERSION).win32.zip
@OS_WIN32_MINGW_TRUE@distinst_win32 = $(PACKAGE)-$(VERSION).win32-setup.exe
@OS_WIN32_MINGW_TRUE@exedir_win32 = $(distdir_win32)/bin
@OS_WIN32_MINGW_TRUE@docdir_win32 = $(distdir_win32)/doc
@OS_WIN32_MINGW_TRUE@FILES_WIN32 = $(exedir_win32)/smartctl.exe \
@OS_WIN32_MINGW_TRUE@              $(exedir_win32)/smartd.exe \
@OS_WIN32_MINGW_TRUE@              $(docdir_win32)/AUTHORS.txt \
@OS_WIN32_MINGW_TRUE@              $(docdir_win32)/CHANGELOG.txt \
@OS_WIN32_MINGW_TRUE@              $(docdir_win32)/COPYING.txt \
@OS_WIN32_MINGW_TRUE@              $(docdir_win32)/INSTALL.txt \
@OS_WIN32_MINGW_TRUE@              $(docdir_win32)/NEWS.txt \
@OS_WIN32_MINGW_TRUE@              $(docdir_win32)/README.txt \
@OS_WIN32_MINGW_TRUE@              $(docdir_win32)/TODO.txt \
@OS_WIN32_MINGW_TRUE@              $(docdir_win32)/WARNINGS.txt \
@OS_WIN32_MINGW_TRUE@              $(docdir_win32)/smartd.conf \
@OS_WIN32_MINGW_TRUE@              $(docdir_win32)/smartctl.8.html \
@OS_WIN32_MINGW_TRUE@              $(docdir_win32)/smartctl.8.txt \
@OS_WIN32_MINGW_TRUE@              $(docdir_win32)/smartd.8.html \
@OS_WIN32_MINGW_TRUE@              $(docdir_win32)/smartd.8.txt \
@OS_WIN32_MINGW_TRUE@              $(docdir_win32)/smartd.conf.5.html \
@OS_WIN32_MINGW_TRUE@              $(docdir_win32)/smartd.conf.5.txt


# Textfile converter from cygutils
@OS_WIN32_MINGW_TRUE@UNIX2DOS = unix2dos -D
@OS_WIN32_MINGW_TRUE@DOS2UNIX = dos2unix -U
SUBDIRS = . examplescripts
all: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .cpp .c .s .o .obj
am--refresh:
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

config.h: stamp-h1
	@if test ! -f $@; then \
	  rm -f stamp-h1; \
	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
	else :; fi

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
	cd $(top_srcdir) && $(AUTOHEADER)
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
install-sbinPROGRAMS: $(sbin_PROGRAMS)
	@$(NORMAL_INSTALL)
	test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
	@list='$(sbin_PROGRAMS)'; for p in $$list; do \
	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
	  if test -f $$p \
	  ; then \
	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
	   echo " $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
	   $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
	  else :; fi; \
	done

uninstall-sbinPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(sbin_PROGRAMS)'; for p in $$list; do \
	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
	  echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
	  rm -f "$(DESTDIR)$(sbindir)/$$f"; \
	done

clean-sbinPROGRAMS:
	-test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
smartctl$(EXEEXT): $(smartctl_OBJECTS) $(smartctl_DEPENDENCIES) 
	@rm -f smartctl$(EXEEXT)
	$(CXXLINK) $(smartctl_OBJECTS) $(smartctl_LDADD) $(LIBS)
smartd$(EXEEXT): $(smartd_OBJECTS) $(smartd_DEPENDENCIES) 
	@rm -f smartd$(EXEEXT)
	$(CXXLINK) $(smartd_OBJECTS) $(smartd_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atacmdnames.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atacmds.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ataprint.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cciss.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/daemon_win32.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hostname_win32.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/knowndrives.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/os_darwin.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/os_freebsd.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/os_generic.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/os_linux.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/os_netbsd.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/os_openbsd.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/os_solaris.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/os_win32.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/regcomp.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/regex.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/regex_internal.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/regexec.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scsiata.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scsicmds.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scsiprint.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smartctl.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smartd.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/syslog_win32.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utility.Po@am__quote@

.c.o:
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c $<

.c.obj:
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`

regex.o: posix/regex.c
@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT regex.o -MD -MP -MF $(DEPDIR)/regex.Tpo -c -o regex.o `test -f 'posix/regex.c' || echo '$(srcdir)/'`posix/regex.c
@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/regex.Tpo $(DEPDIR)/regex.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='posix/regex.c' object='regex.o' libtool=no @AMDEPBACKSLASH@