📄 s6d0144.lst
字号:
363 1
364 1 for(ii=0;ii<240;ii++)
365 1 W_D(0xff,0xff);
C51 COMPILER V7.50 S6D0144 05/29/2007 09:06:46 PAGE 7
366 1
367 1
368 1 for(i=0;i<318;i++)
369 1 {
370 2 W_D(0xf8,0x0);
371 2 for(ii=0;ii<238;ii++)
372 2 W_D(0x0,0);
373 2
374 2 W_D(0x0,0x1f);
375 2 }
376 1
377 1 for(ii=0;ii<240;ii++)
378 1 W_D(0xff,0xff);
379 1
380 1 }
381
382 void display6()//clear
383 {
384 1 unsigned char i,ii;
385 1 set_whole_screen();
386 1
387 1 for(ii=0;ii<32;ii++)
388 1 for(i=0;i<240;i++)
389 1 W_D2(RGB(254,0,0));//red
390 1
391 1 for(ii=0;ii<32;ii++)
392 1 for(i=0;i<240;i++)
393 1 W_D2(RGB(0,254,0));//g
394 1
395 1 for(ii=0;ii<32;ii++)
396 1 for(i=0;i<240;i++)
397 1 W_D2(RGB(0,0,254));//b
398 1
399 1 for(ii=0;ii<32;ii++)
400 1 for(i=0;i<240;i++)
401 1 W_D2(RGB(0,254,254));//b+g
402 1
403 1 for(ii=0;ii<32;ii++)
404 1 for(i=0;i<240;i++)
405 1 W_D2(RGB(254,0,254));//r+b
406 1
407 1
408 1 for(ii=0;ii<32;ii++)
409 1 for(i=0;i<240;i++)
410 1 W_D2(RGB(254,254,0));//r+g
411 1
412 1
413 1 for(ii=0;ii<32;ii++)
414 1 for(i=0;i<240;i++)
415 1 W_D2(RGB(0,0,0));//black
416 1
417 1 for(ii=0;ii<32;ii++)
418 1 for(i=0;i<240;i++)
419 1 W_D2(RGB(254,254,254));//white
420 1
421 1
422 1 for(ii=0;ii<32;ii++)
423 1 for(i=0;i<240;i++)
424 1 W_D2(RGB(0,0,0));//black
425 1
426 1 for(ii=0;ii<32;ii++)
427 1 for(i=0;i<240;i++)
C51 COMPILER V7.50 S6D0144 05/29/2007 09:06:46 PAGE 8
428 1 W_D2(RGB(254,254,254));//white
429 1
430 1
431 1
432 1 }//end sub
433
434
435
436
437
438
439 //////////////////////
440 void delay(uint ms)
441 {uint a,b;
442 1
443 1 for(b=0;b<ms;b++)
444 1 for(a=0;a<900;a++)
445 1 {nop;nop;}
446 1 }
447
448 void delays()
449 {
450 1 _nop_(); _nop_();_nop_();//_nop_();_nop_();_nop_();_nop_();_nop_();
451 1 }
452
453
454 void delay_check_key()
455 {
456 1 unsigned char a;
457 1
458 1 for(a=0;a<10;a++)
459 1 {
460 2 delay(50);
461 2 //check_key();
462 2
463 2 }
464 1 //LED=~LED;
465 1 if(auto_loop==1)
466 1 {
467 2
468 2 if(current_display<MAX_STEP)
469 2 {current_display++;}
470 2 else
471 2 {current_display=1;}//for auto change
472 2 }
473 1 }
474
475 void HX8312_init2()
476 {
477 1 RES=0;
478 1 delay(300);
479 1 RES=1;
480 1 delay(100);
481 1 //************* Start Initial Sequence **********//
482 1 CMD16(0x002b, 0x0000);
483 1 CMD16(0x00E5, 0x8000); // Set the Vcore voltage and this setting is must.
484 1 CMD16(0x0000, 0x0001); // Start internal OSC.
485 1 CMD16(0x0001, 0x0100); // set SS and SM bit
486 1 CMD16(0x0002, 0x0700); // set 1 line inversion
487 1 CMD16(0x0003, 0x1030); // set GRAM write direction and BGR=1.
488 1 CMD16(0x0004, 0x0000); // Resize register
489 1 CMD16(0x0008, 0x0202); // set the back porch and front porch
C51 COMPILER V7.50 S6D0144 05/29/2007 09:06:46 PAGE 9
490 1 CMD16(0x0009, 0x0000); // set non-display area refresh cycle ISC[3:0]
491 1 CMD16(0x000A, 0x0000); // FMARK function
492 1 CMD16(0x000C, 0x0000); // RGB interface setting
493 1 CMD16(0x000D, 0x0000); // Frame marker Position
494 1 CMD16(0x000F, 0x0000); // RGB interface polarity
495 1 //*************Power On sequence ****************//
496 1 CMD16(0x0010, 0x0000); // SAP, BT[3:0], AP, DSTB, SLP, STB
497 1 CMD16(0x0011, 0x0007); // DC1[2:0], DC0[2:0], VC[2:0]
498 1 CMD16(0x0012, 0x0000); // VREG1OUT voltage
499 1 CMD16(0x0013, 0x0000); // VDV[4:0] for VCOM amplitude
500 1 delay(200); // Dis-charge capacitor power voltage
501 1 CMD16(0x0010, 0x17B0); // SAP, BT[3:0], AP, DSTB, SLP, STB
502 1 CMD16(0x0011, 0x0007); // R11h=0x0001 at VCI=3.3V DC1[2:0], DC0[2:0], VC[2:0]
503 1 delay(50); // Delay 50ms
504 1 CMD16(0x0012, 0x013A); // R11h=0x0138 at VCI=3.3V VREG1OUT voltage
505 1 delay(50); // Delay 50ms
506 1 CMD16(0x0013, 0x1A00); // R11h=0x1800 at VCI=3.3V VDV[4:0] for VCOM amplitude
507 1 CMD16(0x0029, 0x000C); // R11h=0x0008 at VCI=3.3V VCM[4:0] for VCOMH
508 1 delay(50);
509 1 CMD16(0x0020, 0x0000); // GRAM horizontal Address
510 1 CMD16(0x0021, 0x0000); // GRAM Vertical Address
511 1 // ----------- Adjust the Gamma Curve ----------//
512 1 CMD16(0x0030, 0x0000);
513 1 CMD16(0x0031, 0x0505);
514 1 CMD16(0x0032, 0x0004);
515 1 CMD16(0x0035, 0x0006);
516 1 CMD16(0x0036, 0x0707);
517 1 CMD16(0x0037, 0x0105);
518 1 CMD16(0x0038, 0x0002);
519 1 CMD16(0x0039, 0x0707);
520 1 CMD16(0x003C, 0x0704);
521 1 CMD16(0x003D, 0x0807);
522 1 //------------------ Set GRAM area ---------------//
523 1 CMD16(0x0050, 0x0000); // Horizontal GRAM Start Address
524 1 CMD16(0x0051, 0x00EF); // Horizontal GRAM End Address
525 1 CMD16(0x0052, 0x0000); // Vertical GRAM Start Address
526 1 CMD16(0x0053, 0x013F); // Vertical GRAM Start Address
527 1 CMD16(0x0060, 0x2700); // Gate Scan Line
528 1 CMD16(0x0061, 0x0001); // NDL,VLE, REV
529 1 CMD16(0x006A, 0x0000); // set scrolling line
530 1 //-------------- Partial Display Control ---------//
531 1 CMD16(0x0080, 0x0000);
532 1 CMD16(0x0081, 0x0000);
533 1 CMD16(0x0082, 0x0000);
534 1 CMD16(0x0083, 0x0000);
535 1 CMD16(0x0084, 0x0000);
536 1 CMD16(0x0085, 0x0000);
537 1 //-------------- Panel Control -------------------//
538 1 CMD16(0x0090, 0x0010);
539 1 CMD16(0x0092, 0x0000);
540 1 CMD16(0x0093, 0x0003);
541 1 CMD16(0x0095, 0x0110);
542 1 CMD16(0x0097, 0x0000);
543 1 CMD16(0x0098, 0x0000);
544 1 CMD16(0x0007, 0x0173); // 262K color and display ON
545 1
546 1
547 1 }
548
549 void HX8312_init()
550 {
551 1
C51 COMPILER V7.50 S6D0144 05/29/2007 09:06:46 PAGE 10
552 1 RES=0;
553 1 delay(300);
554 1 RES=1;
555 1 delay(100);
556 1
557 1
558 1 CMD16(0x00E5, 0x8000); // Set the Vcore voltage and this setting is must.
559 1 CMD16(0x0000, 0x0001); // Start internal OSC.
560 1 CMD16(0x0001, 0x0100); // set SS and SM bit
561 1 CMD16(0x0002, 0x0700); // set 1 line inversion
562 1 CMD16(0x0003, 0x1030); // set GRAM write direction and BGR=0.
563 1
564 1 CMD16(0x0004, 0x0000); // Resize register
565 1 CMD16(0x0008, 0x0202); // set the back porch and front porch
566 1 CMD16(0x0009, 0x0000); // set non-display area refresh cycle ISC[3:0]
567 1 CMD16(0x000A, 0x0000); // FMARK function
568 1 CMD16(0x000C, 0x0000); // RGB interface setting
569 1 CMD16(0x000D, 0x0000); // Frame marker Position
570 1 CMD16(0x000F, 0x0000); // RGB interface polarity
571 1 //*************Power On sequence ****************//
572 1 CMD16(0x0010, 0x0000); // SAP, BT[3:0], AP, DSTB, SLP, STB
573 1 CMD16(0x0011, 0x0007); // DC1[2:0], DC0[2:0], VC[2:0]
574 1 CMD16(0x0012, 0x0000); // VREG1OUT voltage
575 1 CMD16(0x0013, 0x0000); // VDV[4:0] for VCOM amplitude
576 1 delay(200); // Dis-charge capacitor power voltage
577 1 CMD16(0x0010, 0x17B0); // SAP, BT[3:0], AP, DSTB, SLP, STB
578 1 CMD16(0x0011, 0x0007); // DC1[2:0], DC0[2:0], VC[2:0]
579 1 delay(50); // Delay 50ms
580 1 CMD16(0x0012, 0x013E); // VREG1OUT voltage
581 1 delay(50); // Delay 50ms
582 1 CMD16(0x0013, 0x1F00); // VDV[4:0] for VCOM amplitude
583 1 CMD16(0x0029, 0x0013); // VCM[4:0] for VCOMH
584 1 delay(50);
585 1 CMD16(0x0020, 0x0000); // GRAM horizontal Address
586 1 CMD16(0x0021, 0x0000); // GRAM Vertical Address
587 1 // ----------- Adjust the Gamma Curve ----------//
588 1 CMD16(0x0030, 0x0000);
589 1 CMD16(0x0031, 0x0404);
590 1 CMD16(0x0032, 0x0404);
591 1 CMD16(0x0035, 0x0004);
592 1 CMD16(0x0036, 0x0404);
593 1 CMD16(0x0037, 0x0404);
594 1 CMD16(0x0038, 0x0404);
595 1 CMD16(0x0039, 0x0707);
596 1 CMD16(0x003C, 0x0500);
597 1 CMD16(0x003D, 0x0607);
598 1 //------------------ Set GRAM area ---------------//
599 1 CMD16(0x0050, 0x0000); // Horizontal GRAM Start Address
600 1
601 1 CMD16(0x0051, 0x00EF); // Horizontal GRAM End Address
602 1 CMD16(0x0052, 0x0000); // Vertical GRAM Start Address
603 1 CMD16(0x0053, 0x013F); // Vertical GRAM Start Address
604 1 CMD16(0x0060, 0x2700); // Gate Scan Line
605 1 CMD16(0x0061, 0x0001); // NDL,VLE, REV
606 1 CMD16(0x006A, 0x0000); // set scrolling line
607 1 //-------------- Partial Display Control ---------//
608 1 CMD16(0x0080, 0x0000);
609 1 CMD16(0x0081, 0x0000);
610 1 CMD16(0x0082, 0x0000);
611 1 CMD16(0x0083, 0x0000);
612 1 CMD16(0x0084, 0x0000);
613 1 CMD16(0x0085, 0x0000);
C51 COMPILER V7.50 S6D0144 05/29/2007 09:06:46 PAGE 11
614 1 //-------------- Panel Control -------------------//
615 1 CMD16(0x0090, 0x0010);
616 1 CMD16(0x0092, 0x0000);
617 1 CMD16(0x0093, 0x0003);
618 1 CMD16(0x0095, 0x0110);
619 1 CMD16(0x0097, 0x0000);
620 1 CMD16(0x0098, 0x0000);
621 1 CMD16(0x0007, 0x0173); // 262K color and display ON
622 1 delay(50);
623 1 }
624
625
626 void W_D(uchar h,uchar l)
627 {
628 1
629 1 RS=1;
630 1 _CS=0;
631 1 OUTPORT_H=h;
632 1
633 1 OUTPORT_L=l;
634 1 _WR=0;
635 1 _WR=1;
636 1 _CS=1;
637 1 }
638
639 void W_D2(uint ua)
640 {
641 1 uchar aa;
642 1 RS=1;//==>Data
643 1 _CS=0;
644 1 aa=(unsigned char)(ua>>8);
645 1 OUTPORT_H=aa;//
646 1
647 1 OUTPORT_L=(unsigned char)ua;//
648 1
649 1 _WR=0;
650 1 _WR=1;
651 1 _CS=1;
652 1
653 1 }
654
655 void CMD16(unsigned char a,unsigned int b)
656 {
657 1 W_C(a);
658 1 W_D2(b);
659 1 }
660
661 void W_C(unsigned char ua)
662 {
663 1 RS=0;//==>Command
664 1
665 1 _CS=0;
666 1 OUTPORT_H=0;//
667 1 OUTPORT_L=ua;//
668 1 _WR=0;
669 1 _WR=1;
670 1 _CS=1;
671 1
672 1 }
673
674
675 void set_pixel(unsigned char x,unsigned int y)
C51 COMPILER V7.50 S6D0144 05/29/2007 09:06:46 PAGE 12
676 {
677 1 if(x>=240)x=240-1;
678 1 if(y>=320)y=320-1;
679 1
680 1 W_C(0x20);
681 1 W_D2(x);
682 1 W_C(0x21);
683 1 W_D2(y);
684 1
685 1 W_C(0X22);
686 1
687 1 W_D(0xff,0xff);
688 1 }
689
690 void test_pixel2()
691 {
692 1 unsigned int a;
693 1 for(a=0;a<320;a++)
694 1 {
695 2 if(a<240)
696 2 {
697 3 W_C(0x20);
698 3 W_D2(a);
699 3 }
700 2 else
701 2 {
702 3 W_C(0x20);
703 3 W_D2(120);
704 3 }
705 2 W_C(0x21);
706 2 W_D2(a);
707 2
708 2 W_C(0X22);
709 2
710 2 W_D(0xff,0xff);
711 2 }
712 1
713 1 }
714
715
MODULE INFORMATION: STATIC OVERLAYABLE
CODE SIZE = 2450 ----
CONSTANT SIZE = ---- ----
XDATA SIZE = ---- ----
PDATA SIZE = ---- ----
DATA SIZE = 24 28
IDATA SIZE = ---- ----
BIT SIZE = ---- ----
END OF MODULE INFORMATION.
C51 COMPILATION COMPLETE. 0 WARNING(S), 0 ERROR(S)
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -