srverr.h

IBM Lotus C++ API 7.0a for IBM Lotus Notes/Domino Directory Release --------- ------------------

	errortext(ERR_NO_PRIV_PASSTHRU_ACCESS, "You are not allowed to use passthru to access this server")
#define ERR_AUTHENTICATION_MESSAGE	PKG_SERVER+201
	internaltext(ERR_AUTHENTICATION_MESSAGE, "(authentication message)")
#define ERR_SRV_SETUP_COMPLETE		PKG_SERVER+202
	errortext(ERR_SRV_SETUP_COMPLETE,	"Completing Domino server setup")
#define ERR_SRV_SETUP_DIALING	 	PKG_SERVER+203
	errortext(ERR_SRV_SETUP_DIALING,	"Dialing server ")
#define ERR_SRV_SETUP_GET_ID_ADDR	PKG_SERVER+204
	errortext(ERR_SRV_SETUP_GET_ID_ADDR,"Getting server ID from Domino Directory on ")
#define ERR_SRV_SETUP_REPL_ADDR		PKG_SERVER+205
	errortext(ERR_SRV_SETUP_REPL_ADDR,	"Replicating system databases from ")
#define ERR_SRV_SETUP_REG_ADDR		PKG_SERVER+206
	errortext(ERR_SRV_SETUP_REG_ADDR,	"Creating Domino Directory connection entry on ")
#define ERR_SRV_SETUP_DEL_ID		PKG_SERVER+207
	errortext(ERR_SRV_SETUP_DEL_ID,		"Deleting Server ID from Domino Directory on ")
#define ERR_SRV_SETUP_DEL_ID_OK		PKG_SERVER+208
	errortext(ERR_SRV_SETUP_DEL_ID_OK,	"Deleted Server ID from Domino Directory on ")
#define ERR_SRV_SETUP_DONE			PKG_SERVER+209
	errortext(ERR_SRV_SETUP_DONE,		"Domino server setup completed")
#define ERR_SRV_SETUP_DEL_ID_NOACCESS	PKG_SERVER+210
	errortext(ERR_SRV_SETUP_DEL_ID_NOACCESS,	"Insufficient access to delete Server ID from Domino Directory on ")
#define ERR_SRV_SETUP_DEL_ID_ERROR	PKG_SERVER+211
	errortext(ERR_SRV_SETUP_DEL_ID_ERROR,	"Error while deleting Server ID from Domino Directory on %a.%nERROR: %e%nServer ID NOT deleted from Domino Directory.")
#define ERR_NO_PRIV_PASSTHRU_CLIENT PKG_SERVER+212
	errortext(ERR_NO_PRIV_PASSTHRU_CLIENT, "You are not allowed to route through this server")
#define	ERR_TASK_DESC_PASSTHRU		PKG_SERVER+213
	stringtext(ERR_TASK_DESC_PASSTHRU,	"Passthru server on session %04x%04xh for %a")
#define ERR_SVC_CTRL_ERROR	PKG_SERVER+214
	errortext(ERR_SVC_CTRL_ERROR,	"Error during service control setup")
#define ERR_SVC_ACCESS_DENIED		PKG_SERVER+215
	errortext(ERR_SVC_ACCESS_DENIED, "Access denied during service control setup")
#define ERR_SVC_ALREADY_EXISTS		PKG_SERVER+216
	errortext(ERR_SVC_ALREADY_EXISTS, "The Domino Server service already exists in the registry") 
#define ERR_SVC_DOES_NOT_EXIST		PKG_SERVER+217
	errortext(ERR_SVC_DOES_NOT_EXIST, "The Domino Server service does not exist in the registry") 
#define ERR_EXEC_POOLFULL			PKG_SERVER+218
	errortext(ERR_EXEC_POOLFULL,	"Insufficient memory - server executive pool is full.")
#define	ERR_TRANS_INFO_HEADING		PKG_SERVER+219
	stringtext(ERR_TRANS_INFO_HEADING, "Function                       Count     Min     Max      Total    Average%n%n")
#define ERR_CMD_SHOW_SCHEDULE		PKG_SERVER+220
	stringtext(ERR_CMD_SHOW_SCHEDULE,"SCHEDULE")
#define	ERR_HELP_SHOW_SCHEDULE		PKG_SERVER+221
	stringtext(ERR_HELP_SHOW_SCHEDULE,"Next Schedule [Server/Program/Location] [Appl]")
#define	ERR_SERVER_BUSY				PKG_SERVER+222
#define	ERR_SERVER_UNAVAILABLE		ERR_SERVER_BUSY
	stringtext(ERR_SERVER_BUSY, "Access to this server has been restricted due to excessive load")
#define	ERR_SERVER_REPID_NOT_FOUND	PKG_SERVER+223
	stringtext(ERR_SERVER_REPID_NOT_FOUND, "Server has no information for database")
#define	ERR_TASK_DESC_DATABASE_IDLE	PKG_SERVER+224
	stringtext(ERR_TASK_DESC_DATABASE_IDLE,"%a on %s is idle")
#define ERR_CMD_CMD_DROP			PKG_SERVER+225
#ifdef MAC
	stringtext(ERR_CMD_CMD_DROP,"DROP [\042username/database\042] [ALL]")
#else
	stringtext(ERR_CMD_CMD_DROP,"DROP [""username/database""] [ALL]")
#endif
#define	ERR_HELP_CMD_DROP			PKG_SERVER+226
	stringtext(ERR_HELP_CMD_DROP,"Drop one or more sessions")
#define	ERR_HELP_CALL				PKG_SERVER+227
	stringtext(ERR_HELP_CALL,		"*Call the specified server")
#define ERR_REFRESH_SERVER_INFO		PKG_SERVER+228
	stringtext(ERR_REFRESH_SERVER_INFO, "Searching Server document for security lists")
#define ERR_REFRESH_CONFIG_INFO		PKG_SERVER+229
	stringtext(ERR_REFRESH_CONFIG_INFO, "Searching Server Configuration document(s) for parameters...")
#define ERR_CL_LENGTH_MISMATCH	   	PKG_SERVER+230
	stringtext(ERR_CL_LENGTH_MISMATCH,	"Multi-Segment ID table length from client is not the length expected")
#define ERR_CMD_CMD_PUSH			PKG_SERVER+231
	stringtext(ERR_CMD_CMD_PUSH,	"PUSH server [database]")
#define	ERR_HELP_CMD_PUSH			PKG_SERVER+232
	stringtext(ERR_HELP_CMD_PUSH,	"Replicate one-way (push)")
#define ERR_ERROR_CONFIG_INFO		PKG_SERVER+233
	errortext(ERR_ERROR_CONFIG_INFO, "Error Searching Server Configuration document(s)")
#define ERR_CMD_SET_STAT			PKG_SERVER+234
	stringtext(ERR_CMD_SET_STAT,"STAT [Facility] [Statname]")
#define	ERR_HELP_SET_STAT			PKG_SERVER+235
	stringtext(ERR_HELP_SET_STAT,"Reset statistics")
#define	ERR_TASK_DESC_DATABASE		PKG_SERVER+236
	stringtext(ERR_TASK_DESC_DATABASE,"Server for %a on %s")
#define ERR_RECEIVED_DATA			PKG_SERVER+237
	errortext(ERR_RECEIVED_DATA, "Error receiving data from workstation")
#define ERR_SERVERCONFIG_SETINFO	PKG_SERVER+238
	errortext(ERR_SERVERCONFIG_SETINFO, "Error searching Server Configuration document - it will not be updated with '%s'")
#define	ERR_DATABASE_UNAVAILABLE	PKG_SERVER+239
	stringtext(ERR_DATABASE_UNAVAILABLE, "Access to the database has been restricted by the administrator")
#define	ERR_CONSOLE_CLUSTER_HEADER	PKG_SERVER+240
	stringtext(ERR_CONSOLE_CLUSTER_HEADER, "Cluster information:")
#define	ERR_HELP_SHOW_CLUSTER		PKG_SERVER+241
	stringtext(ERR_HELP_SHOW_CLUSTER,"Cluster information")
#define ERR_CMD_SHOW_CLUSTER		PKG_SERVER+242
	stringtext(ERR_CMD_SHOW_CLUSTER,"CLUSTER")
#define ERR_CMD_SHOW_SERVER			PKG_SERVER+243
	stringtext(ERR_CMD_SHOW_SERVER,"SERVER")
#define	ERR_HELP_SHOW_SERVER	 	PKG_SERVER+244
	stringtext(ERR_HELP_SHOW_SERVER,"Server information")
#define ERR_HELP_SHOW_DIRECTORY		PKG_SERVER+245
	stringtext(ERR_HELP_SHOW_DIRECTORY,"File Directory Information")
#define ERR_CMD_SHOW_DIRECTORY		PKG_SERVER+246
	stringtext(ERR_CMD_SHOW_DIRECTORY,"DIRECTORY")
#define	ERR_TASK_DESC_CLUSTER		PKG_SERVER+247
	stringtext(ERR_TASK_DESC_CLUSTER,"Cluster Manager is updating cluster cache")
#define	ERR_TASK_DESC_CLUSTER_IDLE	PKG_SERVER+248
	stringtext(ERR_TASK_DESC_CLUSTER_IDLE,"Cluster Manager is idle")
#define ERR_FIXUP_CHECKING			PKG_SERVER+249
	stringtext(ERR_FIXUP_CHECKING,	"Consistency checking ")
#define ERR_CLUSTER_NOT_CONFIG		PKG_SERVER+250
	errortext(ERR_CLUSTER_NOT_CONFIG,"This server is not configured for a cluster.")
#define ERR_FILENAME_CONFLICT		PKG_SERVER+251
	errortext(ERR_FILENAME_CONFLICT,"The specified file name conflicts with another database which you can not delete")
#define	ERR_SERVER_RESTRICTED		PKG_SERVER+252
	errortext(ERR_SERVER_RESTRICTED,"Access to this server has been restricted by the administrator")
#define ERR_BAD_NTREGISTRY_VALUE	PKG_SERVER+253
	errortext(ERR_BAD_NTREGISTRY_VALUE, "Informational: The registry value HKEY_LOCAL_MACHINE\\%s is currently set to %d. For better server performance, change the setting to %d")
#define ERR_CMD_CMD_HANGUP			PKG_SERVER+254
	stringtext(ERR_CMD_CMD_HANGUP,	"HANGUP portname             ")
#define	ERR_HELP_HANGUP				PKG_SERVER+255
	stringtext(ERR_HELP_HANGUP,		"*Hangup the specified port")

/* Use SERVER2 error code package which goes up to 47. */

#define	ERR_HELP_CMD_RESTART			PKG_SERVER2+0
	stringtext(ERR_HELP_CMD_RESTART,	"Restart information:")
#define	ERR_NO_EVENT_SCHEDULED		PKG_SERVER2+1
	errortext(ERR_NO_EVENT_SCHEDULED,"No events are scheduled at this time.%n%n")
#define ERR_FIXUP_DELAY				PKG_SERVER2+2
	errortext(ERR_FIXUP_DELAY,		"Consistency check will start in %d seconds")
#define ERR_CLUSTER_ADD			PKG_SERVER2+3
	stringtext(ERR_CLUSTER_ADD,	"ADD cluster_name [overwrite]")
#define	ERR_HELP_CLUSTER_ADD	 	PKG_SERVER2+4
	stringtext(ERR_HELP_CLUSTER_ADD,"* Add server to cluster")
#define ERR_CLUSTER_REMOVE		PKG_SERVER2+5
	stringtext(ERR_CLUSTER_REMOVE,	"REMOVE")
#define	ERR_HELP_CLUSTER_REMOVE	 	PKG_SERVER2+6
	stringtext(ERR_HELP_CLUSTER_REMOVE,"* Remove server from cluster")
#define ERR_CLUSTER_COPY		PKG_SERVER2+7
	stringtext(ERR_CLUSTER_COPY,	"COPY source target [options]")
#define	ERR_HELP_CLUSTER_COPY	 	PKG_SERVER2+8
	stringtext(ERR_HELP_CLUSTER_COPY,"* Make a copy of a database")
#define ERR_CLUSTER_DELETE			PKG_SERVER2+9
	stringtext(ERR_CLUSTER_DELETE,	"DELETE database")
#define	ERR_HELP_CLUSTER_DELETE	 	PKG_SERVER2+10
	stringtext(ERR_HELP_CLUSTER_DELETE,"* Delete a database on last close")
#define ERR_CMD_CMD_START			PKG_SERVER2+11
	errortext(ERR_CMD_CMD_START,	"START")
#define	ERR_TASK_SHARED_MAIL		PKG_SERVER2+12
	stringtext(ERR_TASK_SHARED_MAIL,"Shared mail:            %s%n")
#define	ERR_TASK_SHARED_MAIL_0			PKG_SERVER2+13
	stringtext(ERR_TASK_SHARED_MAIL_0,	"Not Enabled")
#define	ERR_TASK_SHARED_MAIL_1			PKG_SERVER2+14
	stringtext(ERR_TASK_SHARED_MAIL_1,	"Enabled for delivery")
#define	ERR_TASK_SHARED_MAIL_2			PKG_SERVER2+15
	stringtext(ERR_TASK_SHARED_MAIL_2,	"Enabled for delivery and transfer")
#define	ERR_TASK_SHARED_MAIL_DB			PKG_SERVER2+16
	stringtext(ERR_TASK_SHARED_MAIL_DB, "Shared mail database:   %p (%lu bytes)%n")
#define ERR_CMD_CMD_STOP			PKG_SERVER2+17
	errortext(ERR_CMD_CMD_STOP,		"STOP")
#define ERR_NOT_IN_CLUSTER			PKG_SERVER2+18
	stringtext(ERR_NOT_IN_CLUSTER,	"This server is not currently a member of a cluster")
#define ERR_HELP_CMD_START				PKG_SERVER2+19
	stringtext(ERR_HELP_CMD_START,	"Starts the specified port")
#define ERR_HELP_CMD_STOP				PKG_SERVER2+20
	stringtext(ERR_HELP_CMD_STOP,	"Stops the specified port")
#define ERR_SERVER_ACCESS_LIST		PKG_SERVER2+21
	stringtext(ERR_SERVER_ACCESS_LIST, "Error reading server access restriction list")
#define ERR_CMD_SHOW_DATABASE		PKG_SERVER2+22
	stringtext(ERR_CMD_SHOW_DATABASE,"DATABASE filename")
#define ERR_HELP_SHOW_DATABASE		PKG_SERVER2+23
	stringtext(ERR_HELP_SHOW_DATABASE, "Show Database Information")
#define	ERR_SERVER_MAXUSERS			PKG_SERVER2+24
	stringtext(ERR_SERVER_MAXUSERS, "Access to the server is restricted due to maximum number of users.")
#define ERR_TASK_MSG_TRACKING_STATE	PKG_SERVER2+25
	stringtext(ERR_TASK_MSG_TRACKING_STATE, "Mail Tracking:|Not Enabled|Enabled")
#define ERR_TASK_MSG_TRACKING_DISABLED_IDX 1
#define ERR_TASK_MSG_TRACKING_ENABLED_IDX  2 

#define	ERR_CLU_NOREP				PKG_SERVER2+26
	stringtext(ERR_CLU_NOREP,		"Error replicating Domino Directory and cluster database directory to another cluster member.  Please replicate manually.")
#define	ERR_CLU_CLDBDIR_EXISTS		PKG_SERVER2+27
	stringtext(ERR_CLU_CLDBDIR_EXISTS, "Error adding server to cluster:  cluster database directory found on system")
#define	ERR_TASK_DESC_DBCACHE		PKG_SERVER2+28
	stringtext(ERR_TASK_DESC_DBCACHE, "Perform Database Cache maintenance")
#define	ERR_CMD_CMD_DBCACHE			PKG_SERVER2+29
	stringtext(ERR_CMD_CMD_DBCACHE,"DBCACHE")
#define ERR_HELP_CMD_DBCACHE		PKG_SERVER2+30
	stringtext(ERR_HELP_CMD_DBCACHE,"Database Cache management commands")
#define ERR_DBCACHE_FLUSH			PKG_SERVER2+31
	stringtext(ERR_DBCACHE_FLUSH,	"FLUSH")
#define	ERR_HELP_DBCACHE_FLUSH		PKG_SERVER2+32
	stringtext(ERR_HELP_DBCACHE_FLUSH,"Clear out database cache")
#define ERR_DBCACHE_DISABLE			PKG_SERVER2+33
	stringtext(ERR_DBCACHE_DISABLE,	"DISABLE")
#define	ERR_HELP_DBCACHE_DISABLE	PKG_SERVER2+34
	stringtext(ERR_HELP_DBCACHE_DISABLE,"Disable use of database cache")
#define ERR_INVALID_OPERATION		PKG_SERVER2+35
	stringtext(ERR_INVALID_OPERATION, "Requested operation is unavailable on this platform.")
#define ERR_SL_TITLE				PKG_SERVER2+36
	stringtext(ERR_SL_TITLE,		"Lotus Notes SL")
#define ERR_SL_ERROR				PKG_SERVER2+37
	stringtext(ERR_SL_ERROR,		"Lotus Notes SL Error")
#define ERR_DBCACHE_SHOW			PKG_SERVER2+38
	stringtext(ERR_DBCACHE_SHOW,	"SHOW")
#define	ERR_HELP_DBCACHE_SHOW		PKG_SERVER2+39
	stringtext(ERR_HELP_DBCACHE_SHOW,"Show contents of database cache")
#define ERR_CMD_SHOW_DBS			PKG_SERVER2+40
	stringtext(ERR_CMD_SHOW_DBS,"DBS")
#define ERR_HELP_SHOW_DBS			PKG_SERVER2+41
	stringtext(ERR_HELP_SHOW_DBS, "* Show Open Database Information")
#define ERR_SERVER_CHECKPW_MUST_BE_HI		PKG_SERVER2+42
	stringtext(ERR_SERVER_CHECKPW_MUST_BE_HI, "Client password checking has been enabled for this server but will be ignored because the server is not running with a hierarchical name")
#define ERR_CMD_SHOW_FILE			PKG_SERVER2+43
	stringtext(ERR_CMD_SHOW_FILE,"FILE")
#define ERR_HELP_SHOW_FILE			PKG_SERVER2+44
	stringtext(ERR_HELP_SHOW_FILE, "* Show Open File Information")
#define ERR_NO_ANON_ACCESS			PKG_SERVER2+45
	errortext(ERR_NO_ANON_ACCESS,	"You are not allowed to perform this operation with Anonymous access")
#define ERR_CMD_SHOW_DBHASH			PKG_SERVER2+46
	stringtext(ERR_CMD_SHOW_DBHASH,"DBHASH")
#define ERR_HELP_SHOW_DBHASH		PKG_SERVER2+47
	stringtext(ERR_HELP_SHOW_DBHASH, "* Show Database Hash Table Information")
/* SERVER2 error code package goes up to 47 only. */

/* Use SERVER3 error code package which go from 0 to 31. */

#define ERR_HELP_RESTART_PORT		PKG_SERVER3+0
	stringtext(ERR_HELP_RESTART_PORT,	"Disable/Enable transactions on port")
#define ERR_CMD_SHOW_NSTABLE		PKG_SERVER3+1
	stringtext(ERR_CMD_SHOW_NSTABLE, "NSTABLE")
#define ERR_HELP_SHOW_NSTABLE		PKG_SERVER3+2
	stringtext(ERR_HELP_SHOW_NSTABLE, "* Show the contents of the Server's Name Server Table")