readme.txt

DESCRIPTION =========== This example project shows how to use the IAR Embedded Workbench for ARM

########################################################################
#
#                         AT91SAM9261-BasicLCD.eww
#
#                                                   $Revision: 1.1 $
#
########################################################################


DESCRIPTION
===========
This example project shows how to use the IAR Embedded Workbench for ARM
to develop code for the Atmel AT91SAM9261 evaluation boards.
The goal of this demonstration project is to show how to use the LCD and 
the touch screen controller.

COMPATIBILITY
=============
The project is compatible with the AT91SAM9261-EK board.

GETTING STARTED
===============
Start the IAR Embedded Workbench for ARM.
Select File->Open->Workspace...
Open the workspace file

JTAG
====
Build the project.
Select Project->Options...
In the category field select C-SPY.
In the setup tab set driver to Macraigor, J-Link or RDI depending on your JTAG hardware.
Start the debugger.
The board may require special setup in a C-SPY macro before the code is downloaded
by the debugger.