📄 tlc1543.c
字号:
#include <reg51.h>
#include <math.h>
#include <stdio.h>
#include <absacc.h>
#include <intrins.h>
#include <string.h>
#include <stdlib.h>
// 直接访问方式地址定义，根据用户平台接口修改
// CWADD1 EQU 0FEFFH 写指令代码地址
// DWADD1 EQU 0FCFFH 写参数及显示数据地址
// DRADD1 EQU 0FEFFH 读参数及显示数据地址
// CRADD1 EQU 0FCFFH 读忙状态地址
// PARA1 EQU 20H 应用于DMF682（256*128）
// PARA1 EQU 28H 应用于DMF50081/50174（320*240）
// PARA1 EQU 50H 应用于DMF50036（640*200）
#define timeadd1 XBYTE[0xFB00] // 时钟地址秒
#define timeadd2 XBYTE[0xFB09] // 时钟年
#define timeadd3 XBYTE[0xFB0B] // 停时钟
#define flash_ad XBYTE[0xF000]
#define wcadd1 XBYTE[0xBF00] // #define wcadd1 XBYTE[0xfe00] 写指令代码地址
#define wdadd1 XBYTE[0x3F00] // #define wdadd1 XBYTE[0xfc00] 写参数及显示数据地址
#define rdadd1 XBYTE[0xBF00] // 读参数及显示数据地址
#define rbadd1 XBYTE[0x3C00] // 读忙状态地址
#define Io8155 XBYTE[0xEF00]
#define M8155 XBYTE[0xCF00]
#define M8155_1 XBYTE[0xCF10]
#define Io8155_A XBYTE[0xEF01]
#define Io8155_B XBYTE[0xEF02]
#define Io8155_c XBYTE[0xEF03]
#define PARA 0x28; // 程序参数定义，根据用户选择的LCM型号修改 32K(7FFFH)
#define True 1
#define False 0
typedef unsigned char uchar;
typedef unsigned int uint;
//sfr16 DPTR = 0x82;
sfr16 flash = 0xb3;
sfr SFCF=0xb1;
sfr SFCM=0xb2;
sfr SFAL=0xb3;
sfr SFAH=0xb4;
sfr SFDT=0xb5;
sfr SFST=0xb6;
sbit Input_1=P1^0;
sbit Input_2=P1^1;
sbit Input_3=P1^2;
sbit Input_4=P1^3;
sbit Master =P1^4;
sbit Second =P1^5;
sbit out=P1^6;
sbit Time_out=P1^7;
sbit P24=P2^4;
sbit P25=P2^5;
/**************** DS18B20 ********************/
sbit TMDAT = P3^2;
/**************** MAX192 *********************/
sbit io_clock = P3^2; //sbit io_clock = P2^7
sbit io_cs = P3^3; //sbit io_cs = P2^6
sbit data_in = P2^0; //sbit data_in = P3^3
sbit data_out = P2^1; //sbit data_out = P1^7
/**************** Max7219 ********************/
sbit M7219_clock = P3^3;
sbit M7219_cs = P2^0;
sbit M7219_in = P2^1;
/*********************************************/
sbit PC_start=P3^2;
sbit STB =P2^3; //sbit MC_start=P3^3; sbit Busy =P3^3;
sbit Bad =P3^4;
sbit Paus =P1^7;
sbit Back =P3^5;
/* 定义调用子程序 */
void Max7219_send(uchar add, uchar dat);
uchar temperature(void);
bit tmreset(void);
uchar readbyte(void);
void delay3(uint Tm_count);
void writebyte(uchar dat);
uchar read_temper(bit C_F);
void tmstart(void);
void Max7219_int(void);
void del_old(uchar id);
void disp_old(uchar i);
void del_sector(uchar k,bit choose);
void save();
void save_data(uchar code *p,uchar i);
void D_40(uchar cos);
void MP_40(uchar *p);
void Print_40(uchar id,bit old_data);
void disp_3(uchar O_X,uchar O_Y,uchar h_ox,uchar l_oy,uchar *p);
void set_xy(uchar o_x,o_y);
void read_time(uchar o_x,uchar o_y,bit open);
void write_time(uchar o_x,uchar o_y);
bit TXD_pc(uchar i);
void KG();
void GL();
void Disp_2(uchar ad);
void CW_PR1(uint O_X,uint O_Y,uchar p);
void Disp_msg(uint o_x,uchar o_y,uchar n);
void Link(uint o_x,uint o_y,uint n,bit c);
void Reset(bit c);
void Max192(uchar i,uchar o_x,uchar o_y,bit set);
void delay_2();
void ZD();
void ZL();
uchar RXD_c();
void Display(uchar o_x,uchar o_y,uchar id,uchar id1,uint x,bit open);
void DOT_s(uint o_x1,uint o_y1,uint o_x2,uint o_y2,bit c);
void TXD_c(uchar i);
uchar choose(uchar O_X,uchar O_Y,uchar h_ox,uchar l_oy,uchar *p);
void TXT_S(uchar O_X,uchar O_Y,bit c,uchar *disp); // 显示16*16字符串
void CCW2_PR24(uchar O_X,uchar O_Y,uchar code_l); // 显示24*24字符
void CCW1_PR(uchar O_X,uchar O_Y,uchar code_l); // 汉字写入子程序(文本方式)
void CCW2_PR(uchar O_X,uchar O_Y,uchar code_l); // 汉字写入子程序(图形方式)
void W_DOT(uint O_X,uint O_Y ); // 绘点子程序
void CW_PR(uint O_X,uint O_Y,uchar *p); // 西文写入子程序
void CLEAR();
void INT_1();
void CGRAM();
void delay(void);
// -------------- DMF-50081/50174 的SYSTEM SET 参数 --------------
// SYSTAB: DB 30H,87H,07H,27H,42H,0F0H,28H,00H ; P1-P8参数
// SCRTAB: DB 00H,00H,0F0H,00H,30H,0F0H,00H,60H,00H,00H ; P1-P10参数
// -------------------240128的SYSTEM SET 参数-------------------------------
// code uchar SYSTAB[8]={0x30,0x87,0x07,0x1e,0x21,0x80,0x1f,0x00};
// code uchar SCRTAB[10]={0x00,0x00,0x80,0xf0,0x01,0x80,0x00,0x00,0x00,0x00};
// -------------------320240的SYSTEM SET 参数-------------------------------
code uchar SYSTAB[8]={0x30,0x87,0x07,0x27,0x42,0xf0,0x28,0x00};
code uchar SCRTAB[10]={0x00,0x00,0xf0,0x00,0x30,0xf0,0x00,0x60,0x00,0x00};
// code uchar SCRTAB[10]={0x00,0x00,0xf0,0xce,0x04,0xf0,0x80,0x00,0x00,0x00};
// 在此可以观察文本方式下的字符及光标的显示效果(写入内容为"Sevicer tel:")
code uchar DRAG_1[6][5]={0,1,2,3,0xfe,0,1,4,5,0xfe,6,7,8,9,0xfe,10,8,4,5,0xfe,11,12,13,14,0xfe,53,54,55,56,0xff};
// code uchar DRAG_2[]={0,1,4,5,0xff};
// code uchar DRAG_3[]={6,7,8,9,0xff};
// code uchar DRAG_4[]={10,8,4,5,0xff};
// code uchar DRAG_5[]={18,19,16,17,20,21,22,0xff};
code uchar TXT_2[]={0x84,0x84,0x84,0x84,0x84,0x84,0xff};
code uchar TXT_1[]={0x80,0x80,0x80,0x80,0x80,0x82,0xff};
code uchar TXT_3[]={23,23,23,23,23,23,0xff};
code uchar TXT_4[]={59,57,58,60,0xff};
code uchar TXT_5[]={67,68,69,63,64,0xff};
/* 文本方式下的汉字显示方法
在文本方式下显示汉字, 需要在SED1335 等显示RAM 内建立一个自定义字符库
CGRAM,然后通过在相应的单元写入相应的字符代码来实现汉字的显示.
SED1335 等的字符代码对应的是8x8 点阵的字符块, 而一个汉字需要四个8x8
点阵的字符块组合显示, 所以在建立汉字的CGRAM 时, 需要四个字符代码管理一个
汉字, 一般是按左上部, 左下部, 右上部和右下部四部分分配代码. 比如在演示程
序中建立 "清华" 两个汉字的CGRAM,那么这两个汉字的代码为80H(81H,82H,83H)和
84H(85H,86H,87H). */
code uchar Msg[19][5]={36,37,30,31,0xff,26,27,0,1,0xff,0,1,28,29,0xff,0,1,24,25,0xff,
32,33,34,35,0xff,2,3,24,39,0xff,45,46,47,48,0xff,45,46,49,50,0xff,
49,50,0,1,0xff,8,51,9,52,0xff,26,27,10,8,0xff,10,8,24,25,0xff,
57,58,38,23,0xff,57,58,61,62,0xff,47,48,63,64,0xff,65,66,63,64,0xff,
26,27,47,48,0xff,47,48,24,25,0xff,36,37,70,71,0xff};
code uchar CGTAB[72][32]={
0x20,0x20,0xFC,0x21,0x43,0x54,0xFC,0x53,0x12,0x1F,0xF2,0x13,0x12,0x12,0x13,0x12,
0x40,0x40,0xA0,0x18,0xF6,0x00,0x04,0xD4,0x54,0xD4,0x54,0xD4,0x54,0x54,0x44,0x8C,/*"输",0,80h,*/
0x40,0x20,0x27,0x09,0x89,0x52,0x52,0x16,0x2B,0x22,0xE2,0x22,0x22,0x22,0x23,0x22,
0x40,0x20,0xFE,0x20,0x20,0x7C,0x44,0xA8,0x98,0x50,0x20,0x30,0x50,0x88,0x0E,0x04,/*"液",1,84h,*/
0x40,0x20,0x31,0x21,0x02,0x04,0xE8,0x21,0x26,0x20,0x20,0x23,0x28,0x30,0x21,0x06,
0x80,0x80,0x40,0x20,0x18,0x26,0x74,0x80,0x20,0x70,0xC8,0x0C,0x18,0x60,0x80,0x00,/*"诊",2,88h,*/
0x04,0x44,0x65,0x55,0x56,0x44,0x7F,0x4C,0x56,0x55,0x64,0x44,0x44,0x7F,0x02,0x00,
0x00,0x0E,0x70,0x40,0x40,0x40,0x7E,0x48,0x48,0x48,0x48,0x88,0x88,0x08,0x08,0x08,/*"断",3,8ch */
0x20,0x10,0x10,0x00,0x89,0x4A,0x57,0x10,0x10,0x23,0xE2,0x22,0x22,0x22,0x23,0x22,
0x40,0x40,0x80,0x90,0x08,0x3C,0xC4,0x00,0x00,0xF8,0x08,0x08,0x08,0x08,0xF8,0x08,/*"治",4,90h */
0x01,0x00,0x1F,0x10,0x90,0x57,0x50,0x30,0x50,0x90,0x10,0x20,0x20,0x40,0x41,0x80,
0x00,0x84,0xFE,0x00,0x00,0xF8,0x10,0x20,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x80,/*"疗",5,94h */
0x40,0x27,0x24,0x84,0x45,0x55,0x15,0x25,0x25,0x25,0xC5,0x41,0x42,0x42,0x44,0x48,
0x02,0xC2,0x42,0x52,0x52,0x52,0x52,0x52,0x52,0x52,0x52,0x02,0x82,0x42,0x4A,0x04,/*"测",6,98h */
0x1F,0x10,0x1F,0x10,0x1F,0x00,0xFF,0x11,0x1F,0x11,0x1F,0x01,0x1F,0x01,0xFF,0x00,
0xF0,0x10,0xF0,0x10,0xF0,0x00,0xFE,0x10,0xF0,0x10,0xF0,0x00,0xF8,0x00,0xFE,0x00,/*"量",7,9ch*/
0x01,0x00,0x3F,0x20,0x4F,0x08,0x08,0x0F,0x08,0x00,0x1F,0x10,0x10,0x10,0x1F,0x00,
0x00,0x80,0xFC,0x04,0xF8,0x10,0x10,0xF0,0x10,0x00,0xF8,0x08,0x08,0x08,0xF8,0x00,/*"宫",8,e0h*/
0x02,0x01,0x7F,0x44,0x8D,0x19,0x22,0x04,0x08,0x30,0xCF,0x08,0x08,0x08,0x0F,0x08,
0x00,0x00,0xFE,0x44,0x30,0x18,0x90,0x40,0x30,0x0E,0xE4,0x20,0x20,0x20,0xE0,0x20,/*"容",9,e4h*/
0x10,0x10,0x10,0xFD,0x11,0x11,0x15,0x19,0x31,0xD1,0x11,0x11,0x12,0x52,0x24,0x00,
0x20,0x10,0x10,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"扩",10,e8h*/
0x01,0x00,0x1F,0x10,0x9F,0x50,0x50,0x17,0x34,0x54,0x94,0x25,0x26,0x24,0x44,0x84,
0x00,0x80,0xFE,0x00,0xFC,0x40,0x40,0xF8,0x48,0xA8,0xA8,0x18,0x08,0x08,0x28,0x10,/*"病",11,ech*/
0x00,0x3F,0x20,0x20,0x20,0x2F,0x20,0x20,0x20,0x21,0x21,0x22,0x42,0x44,0x88,0x00,
0x00,0xFE,0x00,0x80,0x80,0xF8,0x88,0x88,0x88,0x08,0x08,0x08,0x08,0x38,0x10,0x00,/*"历",12,f0h*/
0x01,0x01,0x01,0x7F,0x05,0x09,0x31,0xDF,0x10,0x1F,0x10,0x10,0x1F,0x00,0x7F,0x00,
0x00,0x00,0x00,0xFE,0x40,0x30,0x0E,0xF4,0x10,0xF0,0x10,0x10,0xF0,0x00,0xFE,0x00,/*"查",13,f4h*/
0x01,0x41,0x31,0x22,0x04,0x03,0xE2,0x22,0x23,0x22,0x22,0x23,0x2A,0x30,0x20,0x00,
0x00,0x00,0xFC,0x04,0x04,0xE4,0x24,0x24,0xE4,0x24,0x24,0xE4,0x24,0x04,0x14,0x08,/*"询",14,f8h*/
0x00,0x00,0x07,0x08,0xf9,0x80,0x83,0x80,0x87,0x80,0x87,0xF1,0x0E,0x00,0x00,0x00,
0x00,0x00,0xC0,0x40,0xFE,0x01,0xFE,0x08,0xF0,0x40,0x80,0x00,0x00,0x00,0x00,0x00,//指示,15,
0x00,0x00,0x00,0x01,0x03,0x07,0x0F,0x1F,0x3F,0x7F,0xFF,0xFF,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x80,0xC0,0xE0,0xF0,0xF8,0xFC,0xFE,0xFF,0xFF,0x00,0x00,0x00,0x00,/*"上",16,*/
0x00,0x00,0x00,0x00,0xFF,0xFF,0x7F,0x3F,0x1F,0x0F,0x07,0x03,0x01,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0xFF,0xFF,0xFE,0xFC,0xF8,0xF0,0xE0,0xC0,0x80,0x00,0x00,0x00,/*"下",17,*/
0x00,0x47,0x30,0x23,0x00,0x07,0xF0,0x13,0x12,0x13,0x12,0x13,0x16,0x1A,0x12,0x02,
0x40,0xFC,0x40,0xF8,0x40,0xFE,0x00,0xF8,0x08,0xF8,0x08,0xF8,0x08,0x08,0x28,0x10,/*"请",18,*/
0x00,0x1F,0x10,0x10,0x10,0x1F,0x10,0x10,0x10,0x1F,0x10,0x10,0x20,0x20,0x40,0x80,
0x00,0xFC,0x84,0x84,0x84,0xFC,0x84,0x84,0x84,0xFC,0x84,0x84,0x84,0x84,0x94,0x88,/*"用",19,*/
0x20,0x20,0x27,0x39,0x41,0x7A,0xA7,0x21,0xF9,0x25,0x23,0x21,0x2A,0x34,0x28,0x00,
0x20,0x20,0x7C,0x24,0xFE,0x24,0x7C,0x20,0x7C,0x20,0xFE,0x20,0xA0,0x60,0x1E,0x00,/*"键",20,*/
0x00,0x22,0x12,0x13,0x04,0x00,0xF7,0x11,0x11,0x12,0x12,0x14,0x10,0x28,0x47,0x00,
0x40,0x40,0x40,0xF8,0x40,0x40,0xFC,0x20,0x20,0x24,0x24,0x1C,0x00,0x00,0xFE,0x00,/*"选",21,*/
0x20,0x23,0x21,0xFC,0x20,0x20,0x2B,0x30,0x63,0xA0,0x20,0x27,0x20,0x20,0xA0,0x40,
0x00,0xF8,0x10,0xA0,0x40,0xA0,0x58,0x46,0xF8,0x40,0x40,0xFE,0x40,0x40,0x40,0x40,/*"择",22,*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" 0 ",23,*/
0x10,0x10,0x20,0x23,0x48,0xF0,0x11,0x20,0x40,0xF9,0x01,0x01,0x19,0xE1,0x01,0x00,
0x20,0x20,0x20,0xFE,0x20,0x20,0xFC,0x00,0x00,0xFC,0x04,0x04,0x04,0xFC,0x04,0x00,/*"结",24*/
0x01,0x01,0xFF,0x01,0x3F,0x21,0x21,0x3F,0x23,0x05,0x05,0x09,0x31,0xC1,0x01,0x01,
0x00,0x00,0xFE,0x00,0xF8,0x08,0x08,0xF8,0x08,0x80,0x40,0x30,0x0E,0x04,0x00,0x00,/*"束",25*/
0x00,0x7F,0x00,0x00,0x00,0x00,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0xFF,0x00,0x00,
0x00,0xFE,0x80,0x80,0x80,0x80,0x80,0xFC,0x80,0x80,0x80,0x80,0x80,0xFE,0x00,0x00,/*"正",26*/
0x02,0x02,0x7F,0x04,0x04,0x08,0x18,0x17,0x30,0x50,0x90,0x10,0x10,0x17,0x10,0x00,
0x00,0x00,0xFE,0x00,0x00,0x40,0x40,0xFC,0x40,0x40,0x40,0x40,0x40,0xFE,0x00,0x00,/*"在",27*/
0x08,0x7E,0x10,0x28,0x7E,0x08,0x0E,0xF9,0x0A,0x1F,0x10,0x1F,0x10,0x10,0x1F,0x00,
0x00,0xFC,0x80,0x80,0xFE,0x88,0x88,0x08,0x08,0xF0,0x10,0xF0,0x10,0x10,0xF0,0x00,/*"暂",28*/
0x08,0x0C,0x0B,0x10,0x11,0x31,0x51,0x90,0x17,0x14,0x11,0x10,0x10,0x10,0x10,0x10,
0x40,0x20,0xFE,0x00,0xF8,0x08,0xF8,0x00,0xFE,0x02,0xFC,0x20,0x20,0x20,0xA0,0x40,/*"停",29*/
0x08,0x0F,0x10,0x2F,0x48,0x0F,0x08,0x0F,0x04,0x07,0x0C,0x12,0x21,0x06,0x18,0x60,
0x00,0xFC,0x00,0xF8,0x08,0xF8,0x08,0xF8,0x00,0xF8,0x10,0x60,0x80,0x60,0x1E,0x04,/*"复",30*/
0x09,0x0C,0x10,0x17,0x20,0x34,0x52,0x52,0x91,0x11,0x11,0x10,0x10,0x1F,0x10,0x00,
0x00,0xC0,0x40,0xFC,0x00,0x10,0x18,0x10,0x10,0x20,0x20,0x20,0x40,0xFE,0x00,0x00,/*"位",31*/
0x00,0x00,0x7C,0x11,0x13,0x21,0x3D,0x65,0xA5,0x25,0x25,0x3D,0x22,0x22,0x04,0x08,
0x80,0xFC,0x88,0x10,0xFC,0x24,0x24,0xFC,0x24,0x24,0xFC,0x24,0x24,0x24,0x14,0x08,/*"确",32*/
0x02,0x01,0x3F,0x20,0x40,0x1F,0x01,0x11,0x11,0x11,0x11,0x29,0x25,0x43,0x81,0x00,
0x00,0x00,0xFE,0x04,0x08,0xF0,0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0xFC,0x00,/*"定",33*/
0x00,0xFF,0x22,0x22,0x3E,0x22,0x22,0x3E,0x22,0x22,0x27,0x3A,0xC2,0x02,0x02,0x02,
0x00,0x80,0x7E,0x44,0x44,0x44,0x44,0x28,0x28,0x90,0x10,0x28,0x46,0x84,0x00,0x00,/*"取",34*/
0x20,0x10,0x12,0x81,0x49,0x4B,0x12,0x12,0x23,0x22,0xE2,0x23,0x22,0x22,0x22,0x22,
0x40,0x40,0x44,0x48,0x50,0xFC,0x04,0x04,0xFC,0x04,0x04,0xFC,0x04,0x04,0x14,0x08,/*"消",35*/
0x00,0x3F,0x02,0x04,0x08,0x1F,0x03,0x0C,0x3F,0x10,0x04,0x08,0x10,0x20,0x42,0x01,
0x7C,0x80,0x20,0x20,0x40,0x80,0x20,0x10,0xF8,0x8C,0xA0,0x90,0x88,0x84,0x84,0x00,/*"系",36*/
0x10,0x10,0x23,0x20,0x44,0xF8,0x09,0x13,0x20,0x7C,0x00,0x00,0x1D,0xE1,0x02,0x04,
0x40,0x20,0xFE,0x40,0x40,0x88,0x04,0xFE,0x94,0x90,0x90,0x90,0x12,0x12,0x0E,0x00,/*"统",37*/
0x00,0x00,0x00,0xC6,0x63,0x31,0x18,0x0C,0x86,0x0C,0x18,0x31,0x63,0xC6,0x00,0x00,
0x00,0x00,0x00,0x30,0x18,0x8C,0xC6,0x63,0x31,0x63,0xC6,0x8C,0x18,0x30,0x00,0x00,/*进度,38*/
0x00,0x1F,0x11,0x1F,0x11,0x1F,0x01,0x01,0xFF,0x03,0x05,0x09,0x31,0xC1,0x01,0x01,
0x00,0xF0,0x10,0xF0,0x10,0xF0,0x00,0x00,0xFE,0x80,0x40,0x30,0x0E,0x04,0x00,0x00,/*"果",39*/
0x10,0x13,0x10,0x7C,0x54,0x54,0x7D,0x54,0x54,0x7C,0x55,0x12,0x14,0x11,0x16,0x10,
0x00,0xF8,0x10,0x20,0x40,0xFE,0x52,0x52,0x92,0xA2,0x22,0x42,0x82,0x04,0x14,0x08,/*"畅",40*/
0x01,0x01,0x7F,0x02,0x04,0x0F,0x18,0x28,0x4F,0x88,0x08,0x0F,0x08,0x08,0x08,0x08,
0x00,0x00,0xFE,0x00,0x00,0xF0,0x10,0x10,0xF0,0x10,0x10,0xF0,0x10,0x90,0x70,0x20,/*"有",41*/
0x10,0x10,0x13,0x10,0xFC,0x17,0x10,0x10,0x11,0x17,0x11,0x1D,0xE1,0x41,0x01,0x01,
0x40,0x40,0xFA,0x44,0x48,0xFE,0x20,0xC0,0xFC,0x04,0x04,0xFC,0x04,0x04,0xFC,0x04,/*"堵",42*/
0x02,0x01,0x7F,0x44,0x1F,0x04,0x1F,0x04,0x7F,0x04,0x09,0x3F,0xC1,0x01,0x7F,0x00,
0x00,0x00,0xFE,0x42,0xF8,0x40,0xF8,0x40,0xFE,0x20,0x18,0xFE,0x04,0x00,0xFC,0x00,/*"塞",43*/
0x40,0x27,0x20,0x00,0x07,0x04,0xE7,0x24,0x24,0x27,0x24,0x24,0x24,0x50,0x8F,0x00,
0x00,0xF8,0x90,0x60,0xF8,0x48,0xF8,0x48,0x48,0xF8,0x48,0x68,0x50,0x00,0xFE,0x00,/*"通",44*/
0x00,0x0F,0x08,0x0F,0x08,0x0F,0x00,0xFF,0x01,0x09,0x09,0x09,0x15,0x23,0x40,0x00,
0x00,0xF0,0x10,0xF0,0x10,0xF0,0x00,0xFE,0x00,0x00,0xF8,0x00,0x00,0x00,0xFE,0x00,/*"是",45*/
0x00,0x7F,0x00,0x01,0x03,0x0D,0x19,0x61,0x01,0x1F,0x10,0x10,0x10,0x1F,0x10,0x00,
0x00,0xFC,0x80,0x80,0x20,0x18,0x0C,0x04,0x00,0xF0,0x10,0x10,0x10,0xF0,0x10,0x00,/*"否",46*/
0x10,0x10,0x13,0x10,0xFE,0x10,0x14,0x18,0x30,0xD0,0x10,0x10,0x10,0x10,0x50,0x20,
0x00,0x00,0xFE,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0xA0,0x40,/*"打",47*/
0x00,0x0E,0x70,0x40,0x40,0x40,0x7E,0x40,0x40,0x44,0x58,0xE0,0x40,0x00,0x00,0x00,
0x00,0xFC,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x94,0x88,0x80,0x80,0x80,0x80,/*"印",48*/
0x00,0x01,0x7F,0x01,0x01,0x7F,0x01,0x01,0x01,0xFF,0x01,0x01,0x01,0x01,0x05,0x02,
0x00,0xF8,0x00,0x00,0x00,0xFC,0x00,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,/*"手",49*/
0x00,0x00,0x7E,0x00,0x00,0xFF,0x10,0x10,0x24,0x22,0x4F,0xFA,0x40,0x01,0x02,0x00,
0x20,0x20,0x20,0x20,0xFC,0x24,0x24,0x24,0x24,0x24,0x44,0x44,0x84,0x14,0x08,0x00,/*"动",50*/
0x00,0x3C,0x25,0x26,0x3C,0x24,0x24,0x25,0x3E,0x25,0x24,0x24,0x24,0x44,0x57,0x88,
0x40,0x20,0xFE,0x04,0x90,0xC8,0x86,0x04,0x00,0xFC,0x20,0x20,0x20,0x20,0xFE,0x00,/*"腔",51*/
0x0C,0x71,0x11,0x11,0xFD,0x11,0x39,0x35,0x55,0x50,0x90,0x10,0x11,0x11,0x12,0x14,
0x00,0xFC,0x04,0x04,0x04,0x04,0x04,0x04,0xFC,0x00,0x90,0x88,0x04,0x06,0x02,0x02,/*"积",52*/
0x00,0x00,0x7C,0x44,0x47,0x44,0x7C,0x45,0x44,0x44,0x7C,0x00,0x00,0x00,0x00,0x00,
0x10,0x10,0x10,0x10,0xFE,0x10,0x10,0x10,0x90,0x90,0x10,0x10,0x10,0x10,0x50,0x20,/*"时",53*/
0x20,0x13,0x10,0x40,0x47,0x44,0x44,0x47,0x44,0x44,0x47,0x40,0x40,0x40,0x40,0x40,
0x00,0xFC,0x04,0x04,0xE4,0x24,0x24,0xE4,0x24,0x24,0xE4,0x04,0x04,0x04,0x14,0x08,/*"间",54*/
0x40,0x21,0x31,0x21,0x01,0x01,0xE2,0x25,0x21,0x21,0x20,0x20,0x28,0x30,0x23,0x0C,
0x00,0xF0,0x10,0x10,0x10,0x10,0x0E,0xF8,0x08,0x08,0x90,0x90,0x60,0x90,0x0E,0x04,/*"设",55*/
0x3F,0x24,0x24,0x3F,0x01,0x7F,0x02,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x10,0xFF,
0xF8,0x48,0x48,0xF8,0x00,0xFC,0x00,0xF0,0x10,0xF0,0x10,0xF0,0x10,0xF0,0x10,0xFE,/*"置",56*/
0x40,0x21,0x30,0x20,0x00,0x00,0xF1,0x11,0x11,0x11,0x11,0x11,0x15,0x19,0x10,0x00,
0x00,0xFC,0x04,0x04,0x04,0x04,0xFC,0x00,0x00,0x00,0x00,0x04,0x04,0x06,0xFC,0x00,/*"记",57*/
0x00,0x3F,0x00,0x1F,0x00,0xFF,0x01,0x11,0x09,0x05,0x03,0x0D,0x71,0x21,0x05,0x02,
0x00,0xF0,0x10,0xF0,0x10,0xFE,0x10,0x30,0x40,0x80,0x40,0x30,0x1C,0x08,0x00,0x00,/*"录",58*/
0x00,0x3F,0x01,0x01,0x01,0x01,0x7F,0x01,0x02,0x02,0x04,0x08,0x10,0x20,0xC0,0x00,
0x00,0xFC,0x00,0x00,0x00,0x00,0xFE,0x80,0x80,0x80,0x80,0x80,0x82,0x82,0x7E,0x00,/*"无",59*/
0x00,0x01,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x01,0x00,0x01,0x01,0x00,
0x00,0x80,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x80,0x00,0x80,0x80,0x00,/*"符号",60*/
0x00,0x3B,0x2A,0x2A,0x2A,0x2A,0xFF,0x2A,0x2A,0x2A,0x2A,0x4A,0x4A,0xBA,0x95,0x00,
0x02,0x82,0x92,0x92,0x92,0x92,0xF2,0x92,0x92,0x92,0x92,0x92,0x82,0x82,0x8E,0x04,/*"删",61*/
0x00,0xF8,0x89,0x91,0xA2,0xA7,0x98,0x90,0x97,0xD0,0xA2,0x82,0x84,0x88,0x92,0x81,
0x80,0x80,0x40,0x20,0x10,0xEC,0x80,0x80,0xF8,0x80,0xA0,0x90,0x8C,0x84,0x80,0x00,/*"除",62*/
0x10,0x10,0x10,0x10,0xFE,0x10,0x10,0x7D,0x46,0x44,0x44,0x44,0x7C,0x41,0x06,0x00,
0x40,0x60,0x40,0x40,0xFE,0x88,0x88,0x88,0x50,0x50,0x20,0x20,0x50,0x8E,0x04,0x00,/*"故",63*/
0x00,0x7B,0x49,0x50,0x57,0x60,0x53,0x4A,0x4B,0x6A,0x53,0x40,0x4F,0x40,0x40,0x40,
0x40,0xFC,0x08,0x90,0xFE,0x00,0xF8,0x08,0xF8,0x08,0xF8,0x40,0xFE,0x40,0x40,0x40,/*"障",64*/
0x01,0x01,0x01,0x3F,0x21,0x21,0x3F,0x21,0x21,0x21,0x3F,0x21,0x01,0x01,0x00,0x00,
0x00,0x00,0x00,0xF8,0x08,0x08,0xF8,0x08,0x08,0x08,0xF8,0x08,0x02,0x02,0xFE,0x00,/*"电",65*/
0x10,0x10,0x10,0xFE,0x10,0x10,0x38,0x34,0x54,0x50,0x91,0x11,0x12,0x12,0x14,0x10,
0x00,0xF8,0x88,0x88,0x88,0x88,0x88,0x88,0x88,0x88,0x08,0x0A,0x0A,0x0A,0x06,0x00,/*"机",66*/
0x10,0x18,0x17,0x20,0x20,0x60,0xAF,0x20,0x21,0x23,0x20,0x21,0x20,0x20,0x20,0x00,
0x40,0x48,0xFC,0x40,0x80,0x84,0xFE,0x80,0x08,0xFC,0x08,0x10,0xA0,0x40,0x20,0x00,/*"传",67*/
0x00,0x00,0x3F,0x20,0x3F,0x20,0x2F,0x29,0x4F,0x40,0x80,0x09,0x28,0x28,0x67,0x00,
0x50,0x48,0xFC,0x40,0x48,0x48,0x30,0x20,0x32,0x4A,0x06,0x08,0x84,0x16,0xF0,0x00,/*"感",68*/
0x3E,0x22,0x22,0x3E,0x01,0x01,0xFF,0x06,0x18,0xE0,0x3E,0x22,0x22,0x22,0x3E,0x00,
0x7C,0x44,0x44,0x7C,0x10,0x08,0xFC,0xC0,0x30,0x0E,0xFC,0x88,0x88,0x88,0xF8,0x00,/*"器",69*/
0x40,0x21,0x31,0x21,0x01,0x01,0xE2,0x25,0x21,0x21,0x20,0x20,0x28,0x30,0x23,0x0C,
0x00,0xF0,0x10,0x10,0x10,0x10,0x0E,0xF8,0x08,0x08,0x90,0x90,0x60,0x90,0x0E,0x04,/*"设",70*/
0x3F,0x24,0x24,0x3F,0x01,0x7F,0x02,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x10,0xFF,
0xF8,0x48,0x48,0xF8,0x00,0xFC,0x00,0xF0,0x10,0xF0,0x10,0xF0,0x10,0xF0,0x10,0xFE/*"置",71*/
};
code uchar CGTAB1[2][32]={
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,//80h
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,//82h
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//84h
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00/*"86h */
};
code uchar CGTAB24[10][72]={
0x00,0x00,0x00,0x04,0x04,0x04,0x0C,0x0F,0x38,0x08,0x14,0x15,0x35,0x3E,0x24,0x07,
0x1C,0x74,0x04,0x04,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x04,0x0C,0x0A,0x19,0x90,
0x30,0x2F,0x50,0x80,0x7C,0x49,0x49,0x79,0x49,0x79,0x48,0x48,0x58,0x48,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0x60,0x3C,0x1E,0x60,0x40,0x40,0x20,0x20,
0x20,0x20,0x20,0x20,0xE0,0x60,0x40,0x00,/*"输",0*/
0x00,0x00,0x00,0x00,0x01,0x06,0x18,0x08,0x08,0x0F,0x08,0x08,0x09,0x0E,0x1C,0x18,
0x00,0x01,0x01,0x02,0x04,0x08,0x00,0x00,0x00,0x40,0x60,0xC0,0x80,0x0D,0x46,0x44,
0x45,0x44,0x44,0x44,0xC4,0x44,0xC4,0x84,0x84,0x84,0x04,0x04,0x04,0x04,0x04,0x04,
0x00,0x00,0x00,0x00,0x00,0xF8,0x18,0x18,0x18,0x90,0x10,0x10,0x30,0xF0,0x60,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"卵",1*/
0x00,0x00,0x03,0x03,0x03,0x06,0x05,0x08,0x00,0x00,0x1F,0x30,0x31,0x21,0x01,0x01,
0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,0x00,0x0C,0x04,0x6F,0x88,0x17,0x81,0x30,
0x10,0x3F,0xC0,0x00,0x3E,0xC4,0x84,0xF8,0x00,0x06,0xFB,0x02,0x06,0x3E,0xC0,0x00,
0x00,0x00,0xC0,0x80,0x00,0x00,0x00,0x00,0x70,0xB8,0x20,0x40,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"管",2*/
0x00,0x00,0x00,0x00,0x00,0x0C,0x06,0x00,0x00,0x00,0x0C,0x7C,0x0C,0x08,0x08,0x08,
0x04,0x04,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x38,0x01,0x06,0x02,
0x0F,0x74,0x44,0x4E,0x44,0x47,0x5C,0x44,0x44,0x04,0x80,0x78,0x1F,0x03,0x00,0x00,
0x00,0x00,0x80,0xC0,0xC0,0x00,0x00,0x40,0xE0,0x60,0x60,0x20,0x20,0x20,0x20,0x20,
0xA0,0x60,0x40,0x00,0xFE,0xF0,0x00,0x00,/*"通",3*/
0x00,0x00,0x00,0x00,0x0C,0x06,0x02,0x00,0x00,0x30,0x10,0x10,0x00,0x05,0x07,0x0A,
0x0C,0x18,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x0C,0x06,0x02,0x00,0x0F,0xF0,
0x23,0x33,0x63,0x44,0x8A,0xD3,0x70,0x49,0xC7,0x85,0x88,0x90,0x80,0x80,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0xE0,0x80,0x00,0x00,0x00,0xF0,0x60,0x40,0xC0,0x80,0x00,
0x00,0x80,0xC0,0x78,0x3F,0x00,0x00,0x00,/*"液",4*/
0x00,0x00,0x00,0x0E,0x06,0x00,0x00,0x00,0x04,0x1E,0xE4,0x05,0x0C,0x0C,0x08,0x09,
0x0A,0x0C,0x1C,0x08,0x00,0x00,0x00,0x00,0x00,0x04,0x04,0x0C,0x0E,0x09,0x10,0x30,
0x22,0x42,0x84,0x0D,0x11,0x23,0x06,0x0C,0x10,0x20,0x01,0x03,0x06,0x08,0x30,0xC0,
0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0x70,0x3C,0x1E,0x00,0x00,0x80,0x00,0x00,0x80,
0xC0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,/*"诊",5*/
0x00,0x00,0x00,0x00,0x00,0x10,0x18,0x1A,0x1A,0x10,0x13,0x10,0x11,0x12,0x14,0x10,
0x10,0x10,0x3F,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0xC0,0x90,0x93,0xA2,
0x82,0x82,0xE2,0x83,0xA2,0xB2,0x92,0x84,0x84,0xF4,0x08,0x10,0x30,0x40,0x00,0x00,
0x00,0x00,0x00,0x00,0x30,0x70,0x80,0x00,0x00,0x00,0xFC,0x60,0x60,0x20,0x20,0x20,
0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x00,/*"断",6*/
0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x00,0x20,0x30,0x10,0x00,0x02,0x02,0x04,
0x0C,0x18,0x38,0x30,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x03,0x06,0x04,
0x08,0x10,0x30,0x7F,0x60,0x00,0x00,0x7F,0x20,0x20,0x20,0x20,0x3F,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0x30,0xF8,0x08,0x00,0x00,0x40,0xE0,
0x30,0x60,0x60,0x40,0xE0,0x00,0x00,0x00,/*"治",7*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x0C,0x04,0x00,0x00,0x07,0x3D,0x31,
0x03,0x02,0x06,0x04,0x08,0x10,0x00,0x00,0x00,0x00,0x0E,0x02,0x00,0x03,0xFC,0xC0,
0xC0,0x83,0x9C,0x80,0x82,0x81,0x81,0x01,0x01,0x01,0x01,0x01,0x01,0x07,0x03,0x02,
0x00,0x00,0x00,0x00,0x00,0xE0,0x00,0x00,0x20,0xF0,0x60,0x40,0x80,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"疗",8*/
0x00,0x00,0x00,0x01,0x03,0x03,0x02,0x06,0x0C,0x0C,0x1A,0x12,0x22,0x42,0x82,0x02,
0x06,0x06,0x06,0x06,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x08,0x0C,0x04,
0x00,0x60,0x10,0x19,0x09,0x07,0x02,0x07,0x0D,0x18,0x60,0x80,0x00,0x00,0x00,0x00,
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -