fano.c

RS,Viterbi,Sequence 编解码C源代码

/*
 * Soft decision Fano sequential decoder for K=32 r=1/2 convolutional code
 * Copyright 1994, Phil Karn, KA9Q
 */
#define	LL 1	/* Select Layland-Lushbaugh code */

#include <stdio.h>
#include <stdlib.h>
#include <math.h>
#include "fano.h"

struct node {
	unsigned long encstate;	/* Encoder state of next node */
	long gamma;		/* Cumulative metric to this node */
	int metrics[4];		/* Metrics indexed by all possible tx syms */
	int tm[2];		/* Sorted metrics for current hypotheses */
	int i;			/* Current branch being tested */
};

/* Convolutional coding polynomials. All are rate 1/2, K=32 */
#ifdef	NASA_STANDARD
/* "NASA standard" code by Massey & Costello
 * Nonsystematic, quick look-in, dmin=11, dfree=23
 * used on Pioneer 10-12, Helios A,B
 */
#define	POLY1	0xbbef6bb7
#define	POLY2	0xbbef6bb5
#endif

#ifdef	MJ
/* Massey-Johannesson code
 * Nonsystematic, quick look-in, dmin=13, dfree>=23
 * Purported to be more computationally efficient than Massey-Costello
 */
#define	POLY1	0xb840a20f
#define POLY2	0xb840a20d
#endif

#ifdef	LL
/* Layland-Lushbaugh code
 * Nonsystematic, non-quick look-in, dmin=?, dfree=?
 */
#define	POLY1	0xf2d05351
#define	POLY2	0xe4613c47
#endif

/* Convolutional encoder macro. Takes the encoder state, generates
 * a rate 1/2 symbol pair and stores it in 'sym'. The symbol generated from
 * POLY1 goes into the 2-bit of sym, and the symbol generated from POLY2
 * goes into the 1-bit.
 */
#define	ENCODE(sym,encstate){\
	unsigned long _tmp;\
\
	_tmp = (encstate) & POLY1;\
	_tmp ^= _tmp >> 16;\
	(sym) = Partab[(_tmp ^ (_tmp >> 8)) & 0xff] << 1;\
	_tmp = (encstate) & POLY2;\
	_tmp ^= _tmp >> 16;\
	(sym) |= Partab[(_tmp ^ (_tmp >> 8)) & 0xff];\
}


/* Convolutionally encode a packet. The input data bytes are read
 * high bit first and the encoded packet is written into 'symbols',
 * one symbol per byte. The first symbol is generated from POLY1,
 * the second from POLY2.
 *
 * Storing only one symbol per byte uses more space, but it is faster
 * and easier than trying to pack them more compactly.
 */
int
encode(
unsigned char *symbols,		/* Output buffer, 2*nbytes */ 
unsigned char *data,		/* Input buffer, nbytes */
unsigned int nbytes)		/* Number of bytes in data */
{
	unsigned long encstate;
	int sym;
	int i;

	encstate = 0;
	while(nbytes-- != 0){
		for(i=7;i>=0;i--){
			encstate = (encstate << 1) | ((*data >> i) & 1);
			ENCODE(sym,encstate);
			*symbols++ = sym >> 1;
			*symbols++ = sym & 1;
		}
		data++;
	}
	return 0;
}

/* Decode packet with the Fano algorithm.
 * Return 0 on success, -1 on timeout
 */
int
fano(
unsigned long *metric,	/* Final path metric (returned value) */
unsigned long *cycles,	/* Cycle count (returned value) */
unsigned char *data,	/* Decoded output data */
unsigned char *symbols,	/* Raw deinterleaved input symbols */
unsigned int nbits,	/* Number of output bits */
int mettab[2][256],	/* Metric table, [sent sym][rx symbol] */
int delta,		/* Threshold adjust parameter */
unsigned long maxcycles)/* Decoding timeout in cycles per bit */
{
	struct node *nodes;		/* First node */
	register struct node *np;	/* Current node */
	struct node *lastnode;		/* Last node */
	struct node *tail;		/* First node of tail */
	long t;				/* Threshold */
	long m0,m1;
	long ngamma;
	unsigned int lsym;
	unsigned long i;

	if((nodes = (struct node *)malloc(nbits*sizeof(struct node))) == NULL){
		printf("alloc failed\n");
		return 0;
	}
	lastnode = &nodes[nbits-1];
	tail = &nodes[nbits-33];

	/* Compute all possible branch metrics for each symbol pair
	 * This is the only place we actually look at the raw input symbols
	 */
	for(np=nodes;np <= lastnode;np++){
		np->metrics[0] = mettab[0][symbols[0]] + mettab[0][symbols[1]];
		np->metrics[1] = mettab[0][symbols[0]] + mettab[1][symbols[1]];
		np->metrics[2] = mettab[1][symbols[0]] + mettab[0][symbols[1]];
		np->metrics[3] = mettab[1][symbols[0]] + mettab[1][symbols[1]];
		symbols += 2;
	}
	np = nodes;
	np->encstate = 0;

	/* Compute and sort branch metrics from root node */
	ENCODE(lsym,np->encstate);	/* 0-branch (LSB is 0) */
	m0 = np->metrics[lsym];

	/* Now do the 1-branch. To save another ENCODE call here and
	 * inside the loop, we assume that both polynomials are odd,
	 * providing complementary pairs of branch symbols.

	 * This code should be modified if a systematic code were used.
	 */
	m1 = np->metrics[3^lsym];
	if(m0 > m1){
		/* 0-branch has better metric */
		np->tm[0] = m0;
		np->tm[1] = m1;
	} else {
		/* 1-branch is better */
		np->tm[0] = m1;
		np->tm[1] = m0;
		np->encstate++;	/* Set low bit */
	}
	np->i = 0;	/* Start with best branch */
	maxcycles *= nbits;
	np->gamma = t = 0;

	/* Start the Fano decoder */
	for(i=1;i <= maxcycles;i++){
#ifdef	debug
		printf("k=%ld, g=%ld, t=%ld, m[%d]=%d\n",
		 np-nodes,np->gamma,t,np->i,np->tm[np->i]);
#endif
		/* Look forward */
		ngamma = np->gamma + np->tm[np->i];
		if(ngamma >= t){
			/* Node is acceptable */
			if(np->gamma < t + delta){
				/* First time we've visited this node;
				 * Tighten threshold.
				 *
				 * This loop could be replaced with
				 *   t += delta * ((ngamma - t)/delta);
				 * but the multiply and divide are slower.
				 */
				while(ngamma >= t + delta)
					t += delta;
			}
			/* Move forward */
			np[1].gamma = ngamma;
			np[1].encstate = np->encstate << 1;
			if(++np == lastnode)
				break;	/* Done! */

			/* Compute and sort metrics, starting with the 
			 * zero branch
			 */
			ENCODE(lsym,np->encstate);
			if(np >= tail){
				/* The tail must be all zeroes, so don't even
				 * bother computing the 1-branches there.
				 */
				np->tm[0] = np->metrics[lsym];
			} else {
				m0 = np->metrics[lsym];
				m1 = np->metrics[3^lsym];
				if(m0 > m1){
					/* 0-branch is better */
					np->tm[0] = m0;
					np->tm[1] = m1;
				} else {
					/* 1-branch is better */
					np->tm[0] = m1;
					np->tm[1] = m0;
					np->encstate++;	/* Set low bit */
				}
			}
			np->i = 0;	/* Start with best branch */
			continue;
		}
		/* Threshold violated, can't go forward */
		for(;;){
			/* Look backward */
			if(np == nodes || np[-1].gamma < t){
				/* Can't back up either.
				 * Relax threshold and and look
				 * forward again to better branch.
				 */
				t -= delta;
				if(np->i != 0){
					np->i = 0;
					np->encstate ^= 1;
				}
				break;
			}
			/* Back up */
			if(--np < tail && np->i != 1){
				/* Search next best branch */
				np->i++;
				np->encstate ^= 1;
				break;
			} /* else keep looking back */
		}
	}
	*metric =  np->gamma;	/* Return final path metric */

	/* Copy decoded data to user's buffer */
	nbits >>= 3;
	np = &nodes[7];
	while(nbits-- != 0){
		*data++ = np->encstate;
		np += 8;
	}

	free(nodes);
	*cycles = i+1;
	if(i >= maxcycles)
		return -1;	/* Decoder timed out */
	return 0;		/* Successful completion */
}