main.c

单片机开发软件KEIL

#include <Reg932.h> 

// sfr IEN1 = 0xE8;
// sbit EKBI = IEN1^1;

void keypad_init(void)
{
  // P0.5 must be pulled high
  KBPATN = 0x20;
  // Port 0 must match KBPATN to generate interrupt
  KBCON = 0x02;
  // mask out all pins except P0.5
  KBMASK = 0x20;

  // enable keypad interrupt
  EKBI = 1;
  // enable interrupts
  EA = 1;
}

void keypad_isr(void) interrupt 7 using 1
{
  // turn on peripherals
  PCONA = 0x00;
  // turn on P2 LEDs
  P2 = 0xFF;
  // clear KBIF interrupt flag by writing 0 to it
  KBCON &= 0xFE;
}
 
void main(void)
{
    // set P2 to push-pull outputs
	P2M1 = 0x00;
	P2M2 = 0xFF;

    keypad_init();

    // turn off LEDs
	P2 = 0x00;

    // turn off all peripherals that can be turned off 
    PCONA = 0xEF;

    // switch to idle mode
    PCON |= 0x01;

	while(1);
}