vga_controller.v

Abstract A new intelligent milometer base on a microcontroller can count the sum. By taking full u

//Slightly modified from the DE2 default design example
//
module	VGA_Controller(	//	Host Side
						iCursor_RGB_EN,
						iCursor_X,
						iCursor_Y,
						iCursor_R,
						iCursor_G,
						iCursor_B,
						iRed,
						iGreen,
						iBlue,
						oAddress,
						oCoord_X,
						oCoord_Y,
						//	VGA Side
						oVGA_R,
						oVGA_G,
						oVGA_B,
						oVGA_H_SYNC,
						oVGA_V_SYNC,
						oVGA_SYNC,
						oVGA_BLANK,
						oVGA_CLOCK,
						//	Control Signal
						iCLK,
						iRST_N	);

`include "VGA_Param.h"

//	Host Side
output	reg	[19:0]	oAddress;
output	reg	[9:0]	oCoord_X;
output	reg	[9:0]	oCoord_Y;
input		[3:0]	iCursor_RGB_EN;
input		[9:0]	iCursor_X;
input		[9:0]	iCursor_Y;
input		[9:0]	iCursor_R;
input		[9:0]	iCursor_G;
input		[9:0]	iCursor_B;
input		[9:0]	iRed;
input		[9:0]	iGreen;
input		[9:0]	iBlue;
//	VGA Side
output		[9:0]	oVGA_R;
output		[9:0]	oVGA_G;
output		[9:0]	oVGA_B;
output	reg			oVGA_H_SYNC;
output	reg			oVGA_V_SYNC;
output				oVGA_SYNC;
output				oVGA_BLANK;
output				oVGA_CLOCK;
//	Control Signal
input				iCLK;
input				iRST_N;

//	Internal Registers and Wires
reg		[9:0]		H_Cont;
reg		[9:0]		V_Cont;
reg		[9:0]		Cur_Color_R;
reg		[9:0]		Cur_Color_G;
reg		[9:0]		Cur_Color_B;
wire				mCursor_EN;
wire				mRed_EN;
wire				mGreen_EN;
wire				mBlue_EN;

assign	oVGA_BLANK	=	oVGA_H_SYNC & oVGA_V_SYNC;
assign	oVGA_SYNC	=	1'b0;
assign	oVGA_CLOCK	=	iCLK;
assign	mCursor_EN	=	iCursor_RGB_EN[3];
assign	mRed_EN		=	iCursor_RGB_EN[2];
assign	mGreen_EN	=	iCursor_RGB_EN[1];
assign	mBlue_EN	=	iCursor_RGB_EN[0];

assign	oVGA_R	=	(	H_Cont>=X_START+9 	&& H_Cont<X_START+H_SYNC_ACT+9 &&
						V_Cont>=Y_START 	&& V_Cont<Y_START+V_SYNC_ACT )
						?	(mRed_EN	?	Cur_Color_R	:	0)	:	0;
assign	oVGA_G	=	(	H_Cont>=X_START+9 	&& H_Cont<X_START+H_SYNC_ACT+9 &&
						V_Cont>=Y_START 	&& V_Cont<Y_START+V_SYNC_ACT )
						?	(mGreen_EN	?	Cur_Color_G	:	0)	:	0;
assign	oVGA_B	=	(	H_Cont>=X_START+9 	&& H_Cont<X_START+H_SYNC_ACT+9 &&
						V_Cont>=Y_START 	&& V_Cont<Y_START+V_SYNC_ACT )
						?	(mBlue_EN	?	Cur_Color_B	:	0)	:	0;

//	Pixel LUT Address Generator
always@(posedge iCLK or negedge iRST_N)
begin
	if(!iRST_N)
	begin
		oCoord_X	<=	0;
		oCoord_Y	<=	0;
		oAddress	<=	0;
	end
	else
	begin
		if(	H_Cont>=X_START && H_Cont<X_START+H_SYNC_ACT &&
			V_Cont>=Y_START && V_Cont<Y_START+V_SYNC_ACT )
		begin
			oCoord_X	<=	H_Cont-X_START;
			oCoord_Y	<=	V_Cont-Y_START;
			oAddress	<=	oCoord_Y*H_SYNC_ACT+oCoord_X-3;
		end
	end
end

//	Cursor Generator	
always@(posedge iCLK or negedge iRST_N)
begin
	if(!iRST_N)
	begin
		Cur_Color_R	<=	0;
		Cur_Color_G	<=	0;
		Cur_Color_B	<=	0;
	end
	else
	begin
		if(	H_Cont>=X_START+8 && H_Cont<X_START+H_SYNC_ACT+8 &&
			V_Cont>=Y_START && V_Cont<Y_START+V_SYNC_ACT )
		begin
			if( (	(H_Cont==X_START + 8 + iCursor_X) 	||
					(H_Cont==X_START + 8 + iCursor_X+1) ||
					(H_Cont==X_START + 8 + iCursor_X-1) ||
			 		(V_Cont==Y_START + iCursor_Y)	||
					(V_Cont==Y_START + iCursor_Y+1)	||
					(V_Cont==Y_START + iCursor_Y-1)	)
					&& mCursor_EN )
			begin
				Cur_Color_R	<=	iCursor_R;
				Cur_Color_G	<=	iCursor_G;
				Cur_Color_B	<=	iCursor_B;
			end
			else
			begin
				Cur_Color_R	<=	iRed;
				Cur_Color_G	<=	iGreen;
				Cur_Color_B	<=	iBlue;
			end			
		end
		else
		begin
			Cur_Color_R	<=	iRed;
			Cur_Color_G	<=	iGreen;
			Cur_Color_B	<=	iBlue;
		end
	end
end

//	H_Sync Generator, Ref. 25.175 MHz Clock
always@(posedge iCLK or negedge iRST_N)
begin
	if(!iRST_N)
	begin
		H_Cont		<=	0;
		oVGA_H_SYNC	<=	0;
	end
	else
	begin
		//	H_Sync Counter
		if( H_Cont < H_SYNC_TOTAL )
		H_Cont	<=	H_Cont+1;
		else
		H_Cont	<=	0;
		//	H_Sync Generator
		if( H_Cont < H_SYNC_CYC )
		oVGA_H_SYNC	<=	0;
		else
		oVGA_H_SYNC	<=	1;
	end
end

//	V_Sync Generator, Ref. H_Sync
always@(posedge iCLK or negedge iRST_N)
begin
	if(!iRST_N)
	begin
		V_Cont		<=	0;
		oVGA_V_SYNC	<=	0;
	end
	else
	begin
		//	When H_Sync Re-start
		if(H_Cont==0)
		begin
			//	V_Sync Counter
			if( V_Cont < V_SYNC_TOTAL )
			V_Cont	<=	V_Cont+1;
			else
			V_Cont	<=	0;
			//	V_Sync Generator
			if(	V_Cont < V_SYNC_CYC )
			oVGA_V_SYNC	<=	0;
			else
			oVGA_V_SYNC	<=	1;
		end
	end
end

endmodule