debug.c

S3C2440A的windows ce 5.0 bsp包

//
// Copyright (c) Microsoft Corporation.  All rights reserved.
//
//
// Use of this source code is subject to the terms of the Microsoft end-user
// license agreement (EULA) under which you licensed this SOFTWARE PRODUCT.
// If you did not accept the terms of the EULA, you are not authorized to use
// this source code. For a copy of the EULA, please see the LICENSE.RTF on your
// install media.
//
//------------------------------------------------------------------------------
//
//  File:  debug.c            
//
//  This module is provides the interface to the serial port.
//
#include <bsp.h>
#include <nkintr.h>
 
//------------------------------------------------------------------------------
// Defines 
 
//------------------------------------------------------------------------------
// Externs
 
//------------------------------------------------------------------------------
// Global Variables 
 
//------------------------------------------------------------------------------
// Local Variables 
static S3C2440A_UART_REG *g_pUARTReg;

//------------------------------------------------------------------------------
// Local Functions 


//------------------------------------------------------------------------------
//
//  Function: OEMInitDebugSerial
//
//  Initializes the debug serial port
//
VOID OEMInitDebugSerial() 
{
    S3C2440A_IOPORT_REG *pIOPortReg;
    UINT32 logMask;
	UINT32 count;

    // At this moment we must suppress logging.
    //
    logMask = g_oalLogMask;
    g_oalLogMask = 0;

    // Configure port H for UART1.
    //
    pIOPortReg = (S3C2440A_IOPORT_REG*)OALPAtoVA(S3C2440A_BASE_REG_PA_IOPORT, FALSE);

    // GPH2 and GHP3 are UART1 Tx and Rx, respectively.
    //
    CLRREG32(&pIOPortReg->GPHCON, (3 << 8)|(3 << 10));
    SETREG32(&pIOPortReg->GPHCON, (2 << 8)|(2 << 10));

    // Disable pull-up on TXD1 and RXD1.
    //
    SETREG32(&pIOPortReg->GPHUP, (1 << 4)|(1 << 5));

    // UART1 (TXD1 & RXD1) used for debug serial.
    //
    g_pUARTReg = (S3C2440A_UART_REG *)OALPAtoVA(S3C2440A_BASE_REG_PA_UART1, FALSE);

    // Configure the UART.
    //
    OUTREG32(&g_pUARTReg->UFCON,  BSP_UART1_UFCON);
    OUTREG32(&g_pUARTReg->UMCON,  BSP_UART1_UMCON);
    OUTREG32(&g_pUARTReg->ULCON,  BSP_UART1_ULCON);
    OUTREG32(&g_pUARTReg->UCON,   BSP_UART1_UCON);
    OUTREG32(&g_pUARTReg->UBRDIV, BSP_UART1_UBRDIV);

	for (count=0;count<0xffff;count++);
    // Restore the logging mask.
    //
    g_oalLogMask = logMask;
}


//------------------------------------------------------------------------------
//
//  Function: OEMWriteDebugByte
//
//  Transmits a character out the debug serial port.
//
VOID OEMWriteDebugByte(UINT8 ch) 
{
    // Wait for transmit buffer to be empty
    while ((INREG32(&g_pUARTReg->UTRSTAT) & 0x02) == 0);

    // Send character
    OUTREG32(&g_pUARTReg->UTXH, ch);
}


//------------------------------------------------------------------------------
//
//  Function: OEMReadDebugByte
//
//  Reads a byte from the debug serial port. Does not wait for a character. 
//  If a character is not available function returns "OEM_DEBUG_READ_NODATA".
//

int OEMReadDebugByte() 
{
    UINT32 status, ch;

    status = INREG32(&g_pUARTReg->UTRSTAT);
    if ((status & 0x01) != 0) {
       ch = INREG32(&g_pUARTReg->URXH);
       // if ((status & UART_LINESTAT_RF) != 0) ch = OEM_DEBUG_COM_ERROR;
    } else {
       ch = OEM_DEBUG_READ_NODATA;
    }
    return (int)ch;
}


/*
    @func   void | OEMWriteDebugLED | Writes specified pattern to debug LEDs 1-4.
    @rdesc  None.
    @comm    
    @xref   
*/
void OEMWriteDebugLED(UINT16 Index, DWORD Pattern)
{
    volatile S3C2440A_IOPORT_REG *s2440IOP = (S3C2440A_IOPORT_REG *)OALPAtoVA(S3C2440A_BASE_REG_PA_IOPORT, FALSE);

    // The S24x0X01 Eval platform supports 4 LEDs..
    //
    s2440IOP->GPFDAT=(s2440IOP->GPFDAT & 0xf) | ((Pattern & 0xf)<<4);
}

//------------------------------------------------------------------------------