k9s1208.c

S3C2443的读Nand程序

//====================================================================
// File Name : K9s1208.c
// Function  : S3C2413 8-bit interface Nand Test program(this program use K9k2g16.c).
// Date      : Sept , 2005
// Version   : 0.0
// History
//   R0.0 (20050923): wooseok.oh
//====================================================================


/**************** K9s1206 NAND flash ********************/
// 1block=(512+16)bytes x 32pages
// 4096block
// Block: A[23:14], Page: [13:9]
/**************** K9s1206 NAND flash ********************/

//#include <string.h>
//#include <stdlib.h>
#include "def.h"
#include "option.h"
#include "2443addr.h"
#include "System.h"
#include "Console.h" 

#include "Nand.h"

#define C_LANG	1
#define DMA		2
#define TRANS_MODE 1


U32 srcAddress;
U32 targetBlock;	    // Block number (0 ~ 4095)
U32 targetSize;	    // Total byte size 

U32 downloadAddress;
U32 downloadProgramSize=0x0;

//*************************************************
//*************************************************
//**           H/W dependent functions           **
//************************************************* 
//*************************************************

//The code is made for bi-endian mode

// block0: reserved for boot strap
// block1~4095: used for OS image
// badblock SE: xx xx xx xx xx 00 ....
// good block SE: ECC0 ECC1 ECC2 FF FF FF ....


#define NF_MECC_UnLock()         {rNFCONT&=~(1<<7);}
#define NF_MECC_Lock()         {rNFCONT|=(1<<7);}

#define NF_CMD(cmd)			{rNFCMD=cmd;}
#define NF_ADDR(addr)		{rNFADDR=addr;}
	
#define NF_nFCE_L()			{rNFCONT&=~(1<<1);} 
#define NF_nFCE_H()			{rNFCONT|=(1<<1);}

//for debugging
//#define NF_nFCE_L()			{rNFCONT&=~(1<<2);}
//#define NF_nFCE_H()			{rNFCONT|=(1<<2);}

#define NF_RSTECC()			{rNFCONT|=(1<<5|1<<4);}
#define NF_RDDATA() 		(rNFDATA)
#define NF_RDDATA8() 		((*(volatile unsigned char*)0x4E000010) )

#define NF_WRDATA(data) 	{rNFDATA=data;}

#define NF_WAITRB()    		{while(!(rNFSTAT&(1<<4)));} 
	   						 //wait tWB and check F_RNB pin.
// RnB Signal
#define NF_CLEAR_RB()    		{rNFSTAT |= (1<<4);}	// Have write '1' to clear this bit.
#define NF_DETECT_RB()    		{while(!(rNFSTAT&(1<<4)));}

#define ID_K9S1208V0M	0xec76
#define ID_K9K2G16U0M	0xecca

#define	NF16_BAD_OFFSET		(12)

// HCLK=100Mhz
//#define TACLS		0	// 1-clk(0ns) 
//#define TWRPH0		6	// 3-clk(25ns)
//#define TWRPH1		0	// 1-clk(10ns)  //TACLS+TWRPH0+TWRPH1>=50ns

#define TACLS		1	// 1-clk(0ns) 
#define TWRPH0		6	// 3-clk(25ns)
#define TWRPH1		2	// 1-clk(10ns)  //TACLS+TWRPH0+TWRPH1>=50ns


 

static U8 se8Buf[16]={
	0xff,0xff,0xff,0xff,
	0xff,0xff,0xff,0xff,
	0xff,0xff,0xff,0xff,
	0xff,0xff,0xff,0xff
};


extern char *hex2char(int val);



void __RdPage512(U8 *bufPt);  


int NF8_ReadPage(U32 block,U32 page,U8 *buffer)
{
    int i;
    unsigned int blockPage;
	U32 ecc, Mecc, Secc;
	U8 *bufPt=buffer;
	U8 se[16], ecc0, ecc1, ecc2, ecc3;
    
    page=page&0x1f;
    blockPage=(block<<5)+page;
	NF_RSTECC();    // Initialize ECC
	NF_MECC_UnLock();
    
	NF_nFCE_L();    

	NF_CLEAR_RB();
	NF_CMD(0x00);	// Read command
	NF_ADDR(0); 	// Column = 0
	NF_ADDR(blockPage&0xff);		//
	NF_ADDR((blockPage>>8)&0xff);	// Block & Page num.
	NF_ADDR((blockPage>>16)&0xff);	//
	NF_DETECT_RB();
	 
	
#if TRANS_MODE==C_LANG
    for(i=0;i<512;i++) {
    	*bufPt++=NF_RDDATA8();	// Read one page
    }
#elif TRANS_MODE==DMA
	// Nand to memory dma setting
    rSRCPND=BIT_DMA;	// Init DMA src pending.
    rSUBSRCPND=BIT_SUB_DMA0;
    //rDISRC0=rNFDATA; 	// Nand flash data register
    rDISRC0=NFDATA; 	// Nand flash data register
    rDISRCC0=(0<<1) | (1<<0); //arc=AHB,src_addr=fix
    rDIDST0=(unsigned)bufPt;
    rDIDSTC0=(0<<1) | (0<<0); //dst=AHB,dst_addr=inc;
	rDCON0=(1<<31)|(1<<30)|(1<<29)|(1<<28)|(1<<27)|(0<<23)|(1<<22)|(2<<20)|(512/4/4);
	//Handshake,AHB,interrupt,(4-burst),whole,S/W,no_autoreload,word,count=128;

	// DMA on and start.
    rDMASKTRIG0=(1<<1)|(1<<0);

	while(!(rSUBSRCPND & BIT_SUB_DMA0));
	
    rSRCPND=BIT_DMA;
    rSUBSRCPND=BIT_SUB_DMA0;

#endif

NF_MECC_Lock();

 
 	Mecc=NF_RDDATA();
 	rNFMECCD0=((Mecc&0xff00)<<8)|(Mecc&0xff);
 	rNFMECCD1=((Mecc&0xff000000)>>8)|((Mecc&0xff0000)>>16);

 
	NF_nFCE_H();    

	 if ((rNFECCERR0&0x3) == 0x0){
	//       printf("ECC OK!\n");
		return 1;
	 }
	 else {
	// 	printf("ECC FAIL!\n");
	//	printf("NFECCERR0: 0x%x\n", rNFECCERR0);
	
	    return 0;
	 }


}



void Nand_Reset(void)
{
    int i;
   
	NF_nFCE_L();

	NF_CLEAR_RB();
	NF_CMD(0xFF);	//reset command
	NF_DETECT_RB();
	
	NF_nFCE_H();

}

void NF8_Init(void)
{
	// for S3C2413

	rNFCONF = (TACLS<<12)|(TWRPH0<<8)|(TWRPH1<<4)|(0<<0);	
	// TACLS		[14:12]	CLE&ALE duration = HCLK*TACLS.
	// TWRPH0		[10:8]	TWRPH0 duration = HCLK*(TWRPH0+1)
	// TWRPH1		[6:4]	TWRPH1 duration = HCLK*(TWRPH1+1)
	// AdvFlash(R)	[3]		Advanced NAND, 0:256/512, 1:1024/2048
	// PageSize(R)	[2]		NAND memory page size
	//						when [3]==0, 0:256, 1:512 bytes/page.
	//						when [3]==1, 0:1024, 1:2048 bytes/page.
	// AddrCycle(R)	[1]		NAND flash addr size
	//						when [3]==0, 0:3-addr, 1:4-addr.
	//						when [3]==1, 0:4-addr, 1:5-addr.
	// BusWidth(R/W) [0]	NAND bus width. 0:8-bit, 1:16-bit.
	
	//rNFCONT = (0<<17)|(0<<16)|(0<<10)|(0<<9)|(0<<8)|(1<<7)|(1<<6)|(1<<5)|(1<<4)|(1<<1)|(1<<0);
	rNFCONT = (0<<17)|(0<<16)|(0<<10)|(0<<9)|(0<<8)|(1<<7)|(1<<6)|(1<<5)|(1<<4)|(0x3<<1)|(1<<0);
	// Lock-tight	[17]	0:Disable lock, 1:Enable lock.
	// Soft Lock	[16]	0:Disable lock, 1:Enable lock.
	// EnablillegalAcINT[10]	Illegal access interupt control. 0:Disable, 1:Enable
	// EnbRnBINT	[9]		RnB interrupt. 0:Disable, 1:Enable
	// RnB_TrandMode[8]		RnB transition detection config. 0:Low to High, 1:High to Low
	// SpareECCLock	[7]		0:Unlock, 1:Lock
	// MainECCLock	[6]		0:Unlock, 1:Lock
	// InitMECC(W)	[5]		1:Init main area ECC decoder/encoder.
	// InitSECC(W)	[4]		1:Init spare area ECC decoder/encoder.
	// Reg_nCE1		[2]		0:nFCE=0, 1:nFCE=1.
	// Reg_nCE0		[1]		0:nFCE=0, 1:nFCE=1.
	// NANDC Enable	[0]		operating mode. 0:Disable, 1:Enable.
	//rNFSTAT = 0;
    
    //Nand_Reset();
}


 int NF8_IsBadBlock(U32 block)
{
    int i;
    unsigned int blockPage;
	U8 data;
    
    
   	blockPage=(block<<5);	// For 2'nd cycle I/O[7:5] 
    
	NF_nFCE_L();
	NF_CLEAR_RB();

	NF_CMD(0x50);		 // Spare array read command
	NF_ADDR((512+5)&0xf);		 // Read the mark of bad block in spare array(M addr=5), A4-A7:Don't care

	NF_ADDR(blockPage&0xff);	 // The mark of bad block is in 0 page
	NF_ADDR((blockPage>>8)&0xff);	 // For block number A[24:17]
	NF_ADDR((blockPage>>16)&0xff);  // For block number A[25]
	 
	NF_DETECT_RB();	 // Wait tR(max 12us)

   	data=NF_RDDATA();

	NF_nFCE_H();    

    if(data!=0xff) 	return 0;
    else  	return 1;
    
}