dalmode.c

此代码为WCE5.0下显示器的源代码

*
*      DALShareModeTable allows the first DAL instance in a MAXX configuration to
*      pass the mode table to the second instance in a MAXX configuration.
*
* Note: Function may be called numerous times to reinitialize the set of connected
*       Displays [GG]
*      
\**************************************************************************/

BOOL DALShareModeTable(HDAL hDal, LPVOID lpModeTable, ULONG ulConnectedDisplays)
{
  LPHW_DAL_EXTENSION    lpHDE;  

  DALDEBUG((DALDBG_ENTRY_EXIT, "DALShareModeTable - Entry"));

  DALASSERT((hDal != NULL), "DAL handle 'hDAL' is NULL!");

  // grab the structure for the DAL out of the DDL's handle to it
  lpHDE = (LPHW_DAL_EXTENSION)hDal;

  // mark this DAL instance as sharing the mode table so it no longer builds it's
  // own mode list, and relies on it from somewhere else [GG]

  lpHDE->ulFlags |= HDAL_SHARINGMODETABLE;
  lpHDE->lpaModes = (LPDAL_MODEINFO)lpModeTable;
  lpHDE->ulConnectedDisplays = ulConnectedDisplays;

  // todo - need some validation of DAL's here to ensure both instances share the
  //        same set and order of display types [GG] 17/11/99

  DALDEBUG((DALDBG_ENTRY_EXIT, "DALShareModeTable - Exit"));

  return(TRUE);
}



/******************************Public*Routine******************************\
*
* BOOL DALUnShareModeTable()
*
*      DALUnShareModeTable allows the second DAL instance 
*      in a non-MAXX configuration to rebuild its own mode table.
*
* Note: Function will be called from Control Panel through Escape call
*
\**************************************************************************/

BOOL DALUnShareModeTable(HDAL hDal, LPVOID lpModeTable, ULONG ulConnectedDisplays)
{
  LPHW_DAL_EXTENSION    lpHDE;  

  DALDEBUG((DALDBG_ENTRY_EXIT, "DALUnShareModeTable - Entry"));

  DALASSERT((hDal != NULL), "DAL handle 'hDAL' is NULL!");

  // grab the structure for the DAL out of the DDL's handle to it
  lpHDE = (LPHW_DAL_EXTENSION)hDal;

  // mark this DAL instance as not sharing the mode table
  // and builds it's own mode list
  lpHDE->ulFlags &= ~HDAL_SHARINGMODETABLE;
  lpHDE->lpaModes = (LPDAL_MODEINFO)lpModeTable;
  lpHDE->ulConnectedDisplays = ulDetectConnectedDisplays(lpHDE);

  // Update connected displays in BIOS Scratch Registers
  // Do not update CMOS
  vUpdateBIOSDisplayInfo(lpHDE, TRUE, FALSE);

  DALDEBUG((DALDBG_ENTRY_EXIT, "DALUnShareModeTable - Exit"));

  return(TRUE);
}



/******************************Public*Routine******************************\
*
* ULONG DALSetModeVMI()
*
*      DALSetModeVMI will be called only by GDI.
*      Keep in mind it is called with desktop values, which may not 
*      necessarily coincide with the actual mode we wish to set.
*      CWDDE will call vControllerSetMode itself to change modes.
\**************************************************************************/

ULONG DALSetModeVMI(
HDAL hDAL,
ULONG ulDriverID,
VIDEO_MODE_INFORMATION FAR *lpVMI,
BOOL bForce)
{
  LPHW_DAL_EXTENSION    lpHDE;
  LPDAL_MODEINFO        lpDalMode;
  LPDEVMODE_INFO        lpMode;
  ULONG                 ulDisplayOffset;
  ULONG                 ulDisplayPitch;

  DALDEBUG((DALDBG_ENTRY_EXIT, "DALSetModeVMI - Entry"));
  DALASSERT((hDAL != NULL), "DAL handle 'hDAL' is NULL!");

  // grab the structure for the DAL out of the DDL's handle to it
  lpHDE = (LPHW_DAL_EXTENSION)hDAL;

  // retrieve the DAL_MODEINFO structure using the index passed in
  // from the VIDEO_MODE_INFORMATION structure
  lpDalMode = (LPDAL_MODEINFO) &lpHDE->lpaModes[lpVMI->ModeIndex];
  lpMode    = (LPDEVMODE_INFO) &lpDalMode->sDevModeInfo;

  // set pitch equal to the horizontal res and the offset to 0
  ulDisplayOffset = 0;
  ulDisplayPitch  = lpMode->ulPelsWidth;


  DALDEBUG((DALDBG_ENTRY_EXIT, "DALSetModeVMI - Exit"));
  return (DALSetMode(hDAL,
                     ulDriverID,
                     lpMode,
                     ulDisplayOffset,
                     ulDisplayPitch,
                     bForce));
}



/****************************Private*Routine*******************************\
*
* BOOL bValidateBandwidth()
*
* Function will ensure that there is enough bandwidth available and that
* horizontal time falls within lim  iting constraints.
* It will return TRUE if conditions are met, FALSE if not.
*
* Note: Inherent in this function is validation of both bandwidth and
*       horizonatal time.
*
\**************************************************************************/

BOOL bValidateBandwidth(
LPHW_DAL_EXTENSION lpHDE,
LPDEVMODE_INFO     lpMode,
LPULONG            lpulDisplaysType)
{
  LPDEVGCO        lpController = NULL;
  FIXEDPOINT      sAvailBandwidth;
  FIXEDPOINT      sAvailPeakBandwidth;
  FIXEDPOINT      sReqBandwidth;
  FIXEDPOINT      sReqPeakBandwidth;
  FIXEDPOINT      sBandwidth;
  FIXEDPOINT      sPeakBandwidth;
  PRIO_ELEM       aPrioTable[MAX_PRIO_ELEM];
  HORIZONTAL_TIME aTotalHTime[MAX_NUMBER_CONTROLLERS];
  LPDEVMODE_INFO  lpModeTemp;
  LPULONG         lpulDisplaysTypeTemp;
  BOOL            bRet = TRUE;
  BOOL            bPerformBandwidth = TRUE;
  BOOL            bPerformHTime = TRUE;
  ULONG           i, ulIndex;
  DAL_CRTC_TIMING sTiming;
  lpModeTemp = lpMode;
  lpulDisplaysTypeTemp = lpulDisplaysType;
  

  ZEROMEMORY(&sTiming, sizeof(DAL_CRTC_TIMING));

  for (i = 0; i < lpHDE->ulControllersCount; i++)
  {
    lpController = (LPDEVGCO) &lpHDE->aControllers[i];

    // If any of the controllers DON'T support bandwidth calcualtions,
    // don't perform any.
    if (!(lpController->lpHWED->ulFunctionHooks & GCO_CALCULATE_MEMORY_BANDWIDTH))
      bPerformBandwidth = FALSE;
    else
    {
      if (i == 0)
      {
        // Total CURRENT bandwidth in the system of ALL controllers
        sAvailBandwidth = lpController->lpHWED->sAvailBandwidth;
        ZEROMEMORY((LPVOID)&sReqBandwidth, sizeof(FIXEDPOINT));

        sAvailPeakBandwidth = lpController->lpHWED->sAvailPeakBandwidth;
        ZEROMEMORY((LPVOID)&sReqPeakBandwidth, sizeof(FIXEDPOINT));
      }

      if (lpController->ulFlags & GCO_ACTIVE)
      {
        // if this controller is CURRENTLY active, increment the available bandwidth
        // with which we have to work.  This will hopefully get our available
        // bandwidth in a state we were in at boot time
         //First find that mode's timing 
        
        if(lpController->lpHWED->ulFunctionHooks2 & GCO_HOOK2_CALCULATE_MODE_BANDWIDTH_EX )
        {
          (*lpController->lpHWED->pfnGCOGetDetailedTiming)(lpController->hGCO,
                                                          lpController->ulController,
                                                          NULL, //To get current mode timing
                                                          &sTiming);   

          (*lpController->lpHWED->pfnCalculateModeBandwidthEx) (lpController->hGCO, 
              &lpController->sModeInfo, (LPDAL_CRTC_TIMING)&sTiming, (LPFIXEDPOINT)&sBandwidth); 
        }
        else
        {
          (*lpController->lpHWED->pfnCalculateModeBandwidth) (lpController->hGCO, 
              &lpController->sModeInfo,(LPFIXEDPOINT)&sBandwidth); 
        }

        vIncrementBandwidth(&sAvailBandwidth, (LPFIXEDPOINT)&sBandwidth);
        // If this controller was allocated for a half frame buffer display, deallocate the bandwidth
        // If not, HalfFrameBuffer is zero
        if (lpController->lpHWED->ulFunctionHooks & GCO_CALCULATE_HALFFRAMEBUFFER_BANDWIDTH)
          vIncrementBandwidth(&sAvailBandwidth, (LPFIXEDPOINT)&lpController->sAllocatedBandwidth.HalfFrameBuffer);

        
        if(lpController->lpHWED->ulFunctionHooks2 & GCO_HOOK2_CALCULATE_PEAK_MEMORY_BANDWIDTH_EX)
        {
          if(sTiming.usPixelClock ==0) //We did not hook get mode bandwidth.
          {
            (*lpController->lpHWED->pfnGCOGetDetailedTiming)(lpController->hGCO,
                                                          lpController->ulController,
                                                          NULL, //To get current mode timing
                                                          &sTiming);   
          }

          (*lpController->lpHWED->pfnCalculatePeakModeBandwidthEx)
              (lpController->hGCO, &lpController->sModeInfo, &sTiming, (LPFIXEDPOINT)&sPeakBandwidth);

          vIncrementBandwidth(&sAvailPeakBandwidth, (LPFIXEDPOINT)&sPeakBandwidth);
          
        }
        else if (lpController->lpHWED->ulFunctionHooks & GCO_CALCULATE_PEAK_MEMORY_BANDWIDTH)
        {
          (*lpController->lpHWED->pfnCalculatePeakModeBandwidth)
              (lpController->hGCO, &lpController->sModeInfo, (LPFIXEDPOINT)&sPeakBandwidth);

          vIncrementBandwidth(&sAvailPeakBandwidth, (LPFIXEDPOINT)&sPeakBandwidth);

        }
        
      }
    }

    // If any of the controllers DON'T support HTime calcualtions,
    // don't perform any.
    if (!(lpController->lpHWED->ulFunctionHooks & GCO_CALCULATE_HORIZONTAL_TIME))
      bPerformHTime = FALSE;
  }

  //
  // Bandwidth validation
  //
  if (bPerformBandwidth)
  {
    LPDAL_CRTC_TIMING lpTiming;
    
    for (i = 0; i < lpHDE->ulControllersCount; i++)
    {
      lpController = (LPDEVGCO) &lpHDE->aControllers[i];
      lpTiming = NULL;

      if (*lpulDisplaysTypeTemp != 0)
      {
        // Get the requested bandwidth for this controller only if the
        // displays passed in for this controller are non-zero.  This is done 
        // since we are unaware if we are validating for the current
        // configuration or a possible future one
        
        
        if(lpController->lpHWED->ulFunctionHooks2 & GCO_HOOK2_CALCULATE_MODE_BANDWIDTH_EX)
        {
          if(bGetModeDetailedTimingEx(lpHDE, *lpulDisplaysTypeTemp, lpModeTemp, (LPDAL_CRTC_TIMING)&sTiming, FALSE))
          {
            lpTiming =(LPDAL_CRTC_TIMING)&sTiming;
          }
          (*lpController->lpHWED->pfnCalculateModeBandwidthEx) (lpController->hGCO, 
            lpModeTemp, (LPDAL_CRTC_TIMING)lpTiming, (LPFIXEDPOINT)&sBandwidth);

        }
        else
        {
          (*lpController->lpHWED->pfnCalculateModeBandwidth) (lpController->hGCO, 
            lpModeTemp, (LPFIXEDPOINT)&sBandwidth);
        }
        vIncrementBandwidth(&sReqBandwidth, (LPFIXEDPOINT)&sBandwidth);

        if ((lpController->lpHWED->ulFunctionHooks & GCO_CALCULATE_HALFFRAMEBUFFER_BANDWIDTH) && 
            (*lpulDisplaysTypeTemp & HW_DISPLAY_TYPE_LCD))
        {
          // If this LCD is half frame buffered, add the beandwidth.
          if ((*lpController->lpHWED->pfnCalculateHFBBandwidth) (lpController->hGCO, 
              lpModeTemp, (LPFIXEDPOINT)&sBandwidth))
          {
            vIncrementBandwidth(&sReqBandwidth, (LPFIXEDPOINT)&sBandwidth);
          }
        }

       //Check the new hook first.
       if(lpController->lpHWED->ulFunctionHooks2 & GCO_HOOK2_CALCULATE_PEAK_MEMORY_BANDWIDTH_EX)
        {
         // lpTiming = NULL; Use previous .

          if(sTiming.usPixelClock  == 0) 
          {
             if(bGetModeDetailedTimingEx(lpHDE, *lpulDisplaysTypeTemp, lpModeTemp, (LPDAL_CRTC_TIMING)&sTiming, FALSE))
             {
               lpTiming = (LPDAL_CRTC_TIMING)&sTiming;
             }
          }

          (*lpController->lpHWED->pfnCalculatePeakModeBandwidthEx)
              (lpController->hGCO, lpModeTemp, (LPDAL_CRTC_TIMING)lpTiming, (LPFIXEDPOINT)&sPeakBandwidth);

          vIncrementBandwidth(&sReqPeakBandwidth, (LPFIXEDPOINT)&sPeakBandwidth);
        }
       else if (lpController->lpHWED->ulFunctionHooks & GCO_CALCULATE_PEAK_MEMORY_BANDWIDTH)
        {
          (*lpController->lpHWED->pfnCalculatePeakModeBandwidth)
              (lpController->hGCO, lpModeTemp, (LPFIXEDPOINT)&sPeakBandwidth);
          vIncrementBandwidth(&sReqPeakBandwidth, (LPFIXEDPOINT)&sPeakBandwidth);
        }
      }

      lpModeTemp++;
      lpulDisplaysTypeTemp++;
    }

    // Now perform the validation between available and requested
    bRet = (bCompareFixed(&sAvailBandwidth, &sReqBandwidth) && 
            bCompareFixed(&sAvailPeakBandwidth, &sReqPeakBandwidth));

    if (!(lpHDE->bEnableBandwidthTest))
      bRet = TRUE;

    // Reset the pointers
    lpModeTemp = lpMode;
    lpulDisplaysTypeTemp = lpulDisplaysType;
  }

  //
  // HTime validation (only perform if bandwidth validation passes)
  //
  if (bPerformHTime && bRet)
  {
    ZEROMEMORY((LPVOID)aTotalHTime, (MAX_NUMBER_CONTROLLERS * sizeof(HORIZONTAL_TIME)));
    ZEROMEMORY((LPVOID)aPrioTable, (MAX_PRIO_ELEM * sizeof(PRIO_ELEM)));

    for (i = 0; i < lpHDE->ulControllersCount; i++)
    {
      lpController = (LPDEVGCO) &lpHDE->aControllers[i];

      if (*lpulDisplaysTypeTemp != 0)
      {
        // Get Horizontal Total Time
        (*lpController->lpHWED->pfnGetTotalHTime)(lpController->hGCO, (LPHORIZONTAL_TIME)&aTotalHTime[i], 
                                                  lpModeTemp, *lpulDisplaysTypeTemp);

        // Get display index for priority table
        ulIndex = 7 - (i * 3);

        // Fill in the fields for this controller element
        aPrioTable[ulIndex].bEnabled = TRUE;
        aPrioTable[ulIndex].ulMappedController = i;
        (*lpController->lpHWED->pfnCalculateModeHorizontalTime)(lpController->hGCO,