wu.plg

对显示器LCD的读写和I2C的控制程序

assembling Startup.s...
compiling target.c...
src\target.c(50): warning:  #174-D: expression has no effect
src\target.c(38): warning:  #550-D: variable "rev_buf" was set but never used
compiling main.c...
src\main.c(16): warning:  #47-D: incompatible redefinition of macro "BEEP" (declared at line 517 of "src\LPC2294.h")
src\main.c(89): warning:  #223-D: function "lcd_delay" declared implicitly
src\main.c(92): error:  #20: identifier "DISPLAY_ON" is undefined
src\main.c(93): error:  #20: identifier "DISPLAY_START_LINE" is undefined
src\main.c(94): warning:  #223-D: function "clr_LCD_screen0" declared implicitly
assembling IRQ.s...
compiling per.c...
compiling lcd.c...
src\lcd.c(130): error:  #147: declaration is incompatible with "void clr_LCD_screen(uint8)" (declared at line 94 of "src\config.h")
compiling zimo.c...
Target not created
Build target 'debug_in_Flash'
assembling Startup.s...
compiling target.c...
src\config.h(96): error:  #130: expected a "{"
src\target.c(36): warning:  #12-D: parsing restarts here after previous syntax error
src\target.c(50): warning:  #174-D: expression has no effect
src\target.c(38): warning:  #550-D: variable "rev_buf" was set but never used
compiling main.c...
src\config.h(96): error:  #130: expected a "{"
src\main.c(16): warning:  #47-D: incompatible redefinition of macro "BEEP" (declared at line 517 of "src\LPC2294.h")
src\main.c(38): warning:  #12-D: parsing restarts here after previous syntax error
src\main.c(40): error:  #20: identifier "dly" is undefined
src\main.c(89): warning:  #223-D: function "lcd_delay" declared implicitly
src\main.c(92): error:  #20: identifier "DISPLAY_ON" is undefined
src\main.c(93): error:  #20: identifier "DISPLAY_START_LINE" is undefined
assembling IRQ.s...
compiling per.c...
src\config.h(96): error:  #130: expected a "{"
src\per.c(13): warning:  #12-D: parsing restarts here after previous syntax error
src\per.c(18): error:  #20: identifier "I2C_suba_en" is undefined
src\per.c(18): error:  #20: identifier "I2C_sla" is undefined
src\per.c(30): error:  #20: identifier "I2C_num" is undefined
src\per.c(31): error:  #20: identifier "I2C_buf" is undefined
src\per.c(38): error:  #20: identifier "I2C_end" is undefined
src\per.c(43): error:  #20: identifier "I2C_suba" is undefined
src\per.c(47): error:  #20: identifier "I2C_suba" is undefined
src\per.c(55): error:  #20: identifier "I2C_num" is undefined
src\per.c(56): error:  #20: identifier "I2C_buf" is undefined
src\per.c(63): error:  #20: identifier "I2C_end" is undefined
src\per.c(79): error:  #20: identifier "I2C_end" is undefined
src\per.c(84): error:  #20: identifier "I2C_num" is undefined
src\per.c(94): error:  #20: identifier "I2C_buf" is undefined
src\per.c(145): error:  #20: identifier "I2C_suba" is undefined
src\per.c(146): error:  #20: identifier "I2C_sla" is undefined
src\per.c(147): error:  #20: identifier "I2C_num" is undefined
src\per.c(148): error:  #20: identifier "I2C_buf" is undefined
src\per.c(149): error:  #20: identifier "I2C_suba_en" is undefined
src\per.c(150): error:  #20: identifier "I2C_end" is undefined
src\per.c(184): error:  #20: identifier "I2C_sla" is undefined
src\per.c(185): error:  #20: identifier "I2C_suba" is undefined
src\per.c(186): error:  #20: identifier "I2C_buf" is undefined
src\per.c(187): error:  #20: identifier "I2C_num" is undefined
src\per.c(188): error:  #20: identifier "I2C_suba_en" is undefined
src\per.c(189): error:  #20: identifier "I2C_end" is undefined
compiling lcd.c...
src\config.h(96): error:  #130: expected a "{"
src\lcd.c(10): warning:  #12-D: parsing restarts here after previous syntax error
src\lcd.c(11): error:  #20: identifier "comd_word" is undefined
src\lcd.c(52): warning:  #223-D: function "Write_LCDByte" declared implicitly
src\lcd.c(76): warning:  #223-D: function "Write_LCDByte" declared implicitly
src\lcd.c(94): warning:  #223-D: function "Write_LCDByte" declared implicitly
src\lcd.c(102): error:  #247: function "clr_LCD_screen0" has already been defined
compiling zimo.c...
src\config.h(96): error:  #130: expected a "{"
src\zimo.c(5): warning:  #12-D: parsing restarts here after previous syntax error
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(9): error:  #29: expected an expression
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(9): error:  #65: expected a ";"
Target not created
Build target 'debug_in_Flash'
assembling Startup.s...
compiling target.c...
src\config.h(96): error:  #130: expected a "{"
src\target.c(36): warning:  #12-D: parsing restarts here after previous syntax error
src\target.c(50): warning:  #174-D: expression has no effect
src\target.c(38): warning:  #550-D: variable "rev_buf" was set but never used
compiling main.c...
src\config.h(96): error:  #130: expected a "{"
src\main.c(16): warning:  #47-D: incompatible redefinition of macro "BEEP" (declared at line 517 of "src\LPC2294.h")
src\main.c(38): warning:  #12-D: parsing restarts here after previous syntax error
src\main.c(40): error:  #20: identifier "dly" is undefined
src\main.c(89): warning:  #223-D: function "lcd_delay" declared implicitly
src\main.c(92): error:  #20: identifier "DISPLAY_ON" is undefined
src\main.c(93): error:  #20: identifier "DISPLAY_START_LINE" is undefined
assembling IRQ.s...
compiling per.c...
src\config.h(96): error:  #130: expected a "{"
src\per.c(13): warning:  #12-D: parsing restarts here after previous syntax error
src\per.c(18): error:  #20: identifier "I2C_suba_en" is undefined
src\per.c(18): error:  #20: identifier "I2C_sla" is undefined
src\per.c(30): error:  #20: identifier "I2C_num" is undefined
src\per.c(31): error:  #20: identifier "I2C_buf" is undefined
src\per.c(38): error:  #20: identifier "I2C_end" is undefined
src\per.c(43): error:  #20: identifier "I2C_suba" is undefined
src\per.c(47): error:  #20: identifier "I2C_suba" is undefined
src\per.c(55): error:  #20: identifier "I2C_num" is undefined
src\per.c(56): error:  #20: identifier "I2C_buf" is undefined
src\per.c(63): error:  #20: identifier "I2C_end" is undefined
src\per.c(79): error:  #20: identifier "I2C_end" is undefined
src\per.c(84): error:  #20: identifier "I2C_num" is undefined
src\per.c(94): error:  #20: identifier "I2C_buf" is undefined
src\per.c(145): error:  #20: identifier "I2C_suba" is undefined
src\per.c(146): error:  #20: identifier "I2C_sla" is undefined
src\per.c(147): error:  #20: identifier "I2C_num" is undefined
src\per.c(148): error:  #20: identifier "I2C_buf" is undefined
src\per.c(149): error:  #20: identifier "I2C_suba_en" is undefined
src\per.c(150): error:  #20: identifier "I2C_end" is undefined
src\per.c(184): error:  #20: identifier "I2C_sla" is undefined
src\per.c(185): error:  #20: identifier "I2C_suba" is undefined
src\per.c(186): error:  #20: identifier "I2C_buf" is undefined
src\per.c(187): error:  #20: identifier "I2C_num" is undefined
src\per.c(188): error:  #20: identifier "I2C_suba_en" is undefined
src\per.c(189): error:  #20: identifier "I2C_end" is undefined
compiling lcd.c...
src\config.h(96): error:  #130: expected a "{"
src\lcd.c(10): warning:  #12-D: parsing restarts here after previous syntax error
src\lcd.c(11): error:  #20: identifier "comd_word" is undefined
src\lcd.c(52): warning:  #223-D: function "Write_LCDByte" declared implicitly
src\lcd.c(76): warning:  #223-D: function "Write_LCDByte" declared implicitly
src\lcd.c(94): warning:  #223-D: function "Write_LCDByte" declared implicitly
src\lcd.c(102): error:  #247: function "clr_LCD_screen0" has already been defined
compiling zimo.c...
src\config.h(96): error:  #130: expected a "{"
src\zimo.c(5): warning:  #12-D: parsing restarts here after previous syntax error
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(9): error:  #65: expected a ";"
Target not created
Build target 'debug_in_Flash'
assembling Startup.s...
compiling target.c...
src\config.h(96): error:  #130: expected a "{"
src\target.c(36): warning:  #12-D: parsing restarts here after previous syntax error
src\target.c(50): warning:  #174-D: expression has no effect
src\target.c(38): warning:  #550-D: variable "rev_buf" was set but never used
compiling main.c...
src\config.h(96): error:  #130: expected a "{"
src\main.c(16): warning:  #47-D: incompatible redefinition of macro "BEEP" (declared at line 517 of "src\LPC2294.h")
src\main.c(38): warning:  #12-D: parsing restarts here after previous syntax error
src\main.c(40): error:  #20: identifier "dly" is undefined
src\main.c(89): warning:  #223-D: function "lcd_delay" declared implicitly
src\main.c(92): error:  #20: identifier "DISPLAY_ON" is undefined
src\main.c(93): error:  #20: identifier "DISPLAY_START_LINE" is undefined
assembling IRQ.s...
compiling per.c...
src\config.h(96): error:  #130: expected a "{"
src\per.c(13): warning:  #12-D: parsing restarts here after previous syntax error
src\per.c(18): error:  #20: identifier "I2C_suba_en" is undefined
src\per.c(18): error:  #20: identifier "I2C_sla" is undefined
src\per.c(30): error:  #20: identifier "I2C_num" is undefined
src\per.c(31): error:  #20: identifier "I2C_buf" is undefined
src\per.c(38): error:  #20: identifier "I2C_end" is undefined
src\per.c(43): error:  #20: identifier "I2C_suba" is undefined
src\per.c(47): error:  #20: identifier "I2C_suba" is undefined
src\per.c(55): error:  #20: identifier "I2C_num" is undefined
src\per.c(56): error:  #20: identifier "I2C_buf" is undefined
src\per.c(63): error:  #20: identifier "I2C_end" is undefined
src\per.c(79): error:  #20: identifier "I2C_end" is undefined
src\per.c(84): error:  #20: identifier "I2C_num" is undefined
src\per.c(94): error:  #20: identifier "I2C_buf" is undefined
src\per.c(145): error:  #20: identifier "I2C_suba" is undefined
src\per.c(146): error:  #20: identifier "I2C_sla" is undefined
src\per.c(147): error:  #20: identifier "I2C_num" is undefined
src\per.c(148): error:  #20: identifier "I2C_buf" is undefined
src\per.c(149): error:  #20: identifier "I2C_suba_en" is undefined
src\per.c(150): error:  #20: identifier "I2C_end" is undefined
src\per.c(184): error:  #20: identifier "I2C_sla" is undefined
src\per.c(185): error:  #20: identifier "I2C_suba" is undefined
src\per.c(186): error:  #20: identifier "I2C_buf" is undefined
src\per.c(187): error:  #20: identifier "I2C_num" is undefined
src\per.c(188): error:  #20: identifier "I2C_suba_en" is undefined
src\per.c(189): error:  #20: identifier "I2C_end" is undefined
compiling lcd.c...
src\config.h(96): error:  #130: expected a "{"
src\lcd.c(10): warning:  #12-D: parsing restarts here after previous syntax error
src\lcd.c(11): error:  #20: identifier "comd_word" is undefined
src\lcd.c(52): warning:  #223-D: function "Write_LCDByte" declared implicitly
src\lcd.c(76): warning:  #223-D: function "Write_LCDByte" declared implicitly
src\lcd.c(94): warning:  #223-D: function "Write_LCDByte" declared implicitly
src\lcd.c(102): error:  #247: function "clr_LCD_screen0" has already been defined
compiling zimo.c...
src\config.h(96): error:  #130: expected a "{"
src\zimo.c(5): warning:  #12-D: parsing restarts here after previous syntax error
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has no effect
src\zimo.c(8): warning:  #174-D: expression has