📄 lpc17xx.h
字号:
/*********************************************************************************************************
* @file: LPC17xx.h
* @purpose: CMSIS Cortex-M3 Core Peripheral Access Layer Header File for
* NXP LPC17xx Device Series
* @version: V1.09
* @date: 17. March 2010
*--------------------------------------------------------------------------------------------------------
*
* Copyright (C) 2008 ARM Limited. All rights reserved.
*
* ARM Limited (ARM) is supplying this software for use with Cortex-M3
* processor based microcontrollers. This file can be freely distributed
* within development tools that are supporting such ARM based processors.
*
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
* ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
*
********************************************************************************************************/
#ifndef __LPC17xx_H__
#define __LPC17xx_H__
/*
* =======================================================================================================
* ---------- Interrupt Number Definition ----------------------------------------------------------------
* =======================================================================================================
*/
typedef enum IRQn
{
/****** Cortex-M3 Processor Exceptions Numbers *********************************************************/
NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
/****** LPC17xx Specific Interrupt Numbers *************************************************************/
WDT_IRQn = 0, /*!< Watchdog Timer Interrupt */
TIMER0_IRQn = 1, /*!< Timer0 Interrupt */
TIMER1_IRQn = 2, /*!< Timer1 Interrupt */
TIMER2_IRQn = 3, /*!< Timer2 Interrupt */
TIMER3_IRQn = 4, /*!< Timer3 Interrupt */
UART0_IRQn = 5, /*!< UART0 Interrupt */
UART1_IRQn = 6, /*!< UART1 Interrupt */
UART2_IRQn = 7, /*!< UART2 Interrupt */
UART3_IRQn = 8, /*!< UART3 Interrupt */
PWM1_IRQn = 9, /*!< PWM1 Interrupt */
I2C0_IRQn = 10, /*!< I2C0 Interrupt */
I2C1_IRQn = 11, /*!< I2C1 Interrupt */
I2C2_IRQn = 12, /*!< I2C2 Interrupt */
SPI_IRQn = 13, /*!< SPI Interrupt */
SSP0_IRQn = 14, /*!< SSP0 Interrupt */
SSP1_IRQn = 15, /*!< SSP1 Interrupt */
PLL0_IRQn = 16, /*!< PLL0 Lock (Main PLL) Interrupt */
RTC_IRQn = 17, /*!< Real Time Clock Interrupt */
EINT0_IRQn = 18, /*!< External Interrupt 0 Interrupt */
EINT1_IRQn = 19, /*!< External Interrupt 1 Interrupt */
EINT2_IRQn = 20, /*!< External Interrupt 2 Interrupt */
EINT3_IRQn = 21, /*!< External Interrupt 3 Interrupt */
ADC_IRQn = 22, /*!< A/D Converter Interrupt */
BOD_IRQn = 23, /*!< Brown-Out Detect Interrupt */
USB_IRQn = 24, /*!< USB Interrupt */
CAN_IRQn = 25, /*!< CAN Interrupt */
DMA_IRQn = 26, /*!< General Purpose DMA Interrupt */
I2S_IRQn = 27, /*!< I2S Interrupt */
ENET_IRQn = 28, /*!< Ethernet Interrupt */
RIT_IRQn = 29, /*!< Repetitive Interrupt Timer Interrupt */
MCPWM_IRQn = 30, /*!< Motor Control PWM Interrupt */
QEI_IRQn = 31, /*!< Quadrature Encoder Interface Interrupt */
PLL1_IRQn = 32, /*!< PLL1 Lock (USB PLL) Interrupt */
USBActivity_IRQn = 33, /* USB Activity interrupt */
CANActivity_IRQn = 34, /* CAN Activity interrupt */
} IRQn_Type;
/*
* =======================================================================================================
* ----------- Processor and Core Peripheral Section -----------------------------------------------------
* =======================================================================================================
*/
/* Configuration of the Cortex-M3 Processor and Core Peripherals */
#define __MPU_PRESENT 1 /*!< MPU present or not */
#define __NVIC_PRIO_BITS 5 /*!< Number of Bits used for Priority Levels */
#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
#include <core_cm3.h> /* Cortex-M3 processor and core peripherals */
#include "system_LPC17xx.h" /* System Header */
/*********************************************************************************************************/
/* Device Specific Peripheral registers structures */
/*********************************************************************************************************/
#if defined ( __CC_ARM )
#pragma anon_unions
#endif
/*-------------------------------- System Control (SC) -------------------------------------------------*/
typedef struct
{
__IO uint32_t FLASHCFG; /* Flash Accelerator Module */
uint32_t RESERVED0[31];
__IO uint32_t PLL0CON; /* Clocking and Power Control */
__IO uint32_t PLL0CFG;
__I uint32_t PLL0STAT;
__O uint32_t PLL0FEED;
uint32_t RESERVED1[4];
__IO uint32_t PLL1CON;
__IO uint32_t PLL1CFG;
__I uint32_t PLL1STAT;
__O uint32_t PLL1FEED;
uint32_t RESERVED2[4];
__IO uint32_t PCON;
__IO uint32_t PCONP;
uint32_t RESERVED3[15];
__IO uint32_t CCLKCFG;
__IO uint32_t USBCLKCFG;
__IO uint32_t CLKSRCSEL;
__IO uint32_t CANSLEEPCLR;
__IO uint32_t CANWAKEFLAGS;
uint32_t RESERVED4[10];
__IO uint32_t EXTINT; /* External Interrupts */
uint32_t RESERVED5;
__IO uint32_t EXTMODE;
__IO uint32_t EXTPOLAR;
uint32_t RESERVED6[12];
__IO uint32_t RSID; /* Reset */
uint32_t RESERVED7[7];
__IO uint32_t SCS; /* Syscon Miscellaneous Registers */
__IO uint32_t IRCTRIM; /* Clock Dividers */
__IO uint32_t PCLKSEL0;
__IO uint32_t PCLKSEL1;
uint32_t RESERVED8[4];
__IO uint32_t USBIntSt; /* USB Device/OTG Interrupt Register */
__IO uint32_t DMAREQSEL;
__IO uint32_t CLKOUTCFG; /* Clock Output Configuration */
} LPC_SC_TypeDef;
/*--------------------------------- Pin Connect Block (PINCON) -----------------------------------------*/
typedef struct
{
__IO uint32_t PINSEL0;
__IO uint32_t PINSEL1;
__IO uint32_t PINSEL2;
__IO uint32_t PINSEL3;
__IO uint32_t PINSEL4;
__IO uint32_t PINSEL5;
__IO uint32_t PINSEL6;
__IO uint32_t PINSEL7;
__IO uint32_t PINSEL8;
__IO uint32_t PINSEL9;
__IO uint32_t PINSEL10;
uint32_t RESERVED0[5];
__IO uint32_t PINMODE0;
__IO uint32_t PINMODE1;
__IO uint32_t PINMODE2;
__IO uint32_t PINMODE3;
__IO uint32_t PINMODE4;
__IO uint32_t PINMODE5;
__IO uint32_t PINMODE6;
__IO uint32_t PINMODE7;
__IO uint32_t PINMODE8;
__IO uint32_t PINMODE9;
__IO uint32_t PINMODE_OD0;
__IO uint32_t PINMODE_OD1;
__IO uint32_t PINMODE_OD2;
__IO uint32_t PINMODE_OD3;
__IO uint32_t PINMODE_OD4;
__IO uint32_t I2CPADCFG;
} LPC_PINCON_TypeDef;
/*-------------------------------- General Purpose Input/Output (GPIO) ---------------------------------*/
typedef struct
{
union {
__IO uint32_t FIODIR;
struct {
__IO uint16_t FIODIRL;
__IO uint16_t FIODIRH;
};
struct {
__IO uint8_t FIODIR0;
__IO uint8_t FIODIR1;
__IO uint8_t FIODIR2;
__IO uint8_t FIODIR3;
};
};
uint32_t RESERVED0[3];
union {
__IO uint32_t FIOMASK;
struct {
__IO uint16_t FIOMASKL;
__IO uint16_t FIOMASKH;
};
struct {
__IO uint8_t FIOMASK0;
__IO uint8_t FIOMASK1;
__IO uint8_t FIOMASK2;
__IO uint8_t FIOMASK3;
};
};
union {
__IO uint32_t FIOPIN;
struct {
__IO uint16_t FIOPINL;
__IO uint16_t FIOPINH;
};
struct {
__IO uint8_t FIOPIN0;
__IO uint8_t FIOPIN1;
__IO uint8_t FIOPIN2;
__IO uint8_t FIOPIN3;
};
};
union {
__IO uint32_t FIOSET;
struct {
__IO uint16_t FIOSETL;
__IO uint16_t FIOSETH;
};
struct {
__IO uint8_t FIOSET0;
__IO uint8_t FIOSET1;
__IO uint8_t FIOSET2;
__IO uint8_t FIOSET3;
};
};
union {
__O uint32_t FIOCLR;
struct {
__O uint16_t FIOCLRL;
__O uint16_t FIOCLRH;
};
struct {
__O uint8_t FIOCLR0;
__O uint8_t FIOCLR1;
__O uint8_t FIOCLR2;
__O uint8_t FIOCLR3;
};
};
} LPC_GPIO_TypeDef;
typedef struct
{
__I uint32_t IntStatus;
__I uint32_t IO0IntStatR;
__I uint32_t IO0IntStatF;
__O uint32_t IO0IntClr;
__IO uint32_t IO0IntEnR;
__IO uint32_t IO0IntEnF;
uint32_t RESERVED0[3];
__I uint32_t IO2IntStatR;
__I uint32_t IO2IntStatF;
__O uint32_t IO2IntClr;
__IO uint32_t IO2IntEnR;
__IO uint32_t IO2IntEnF;
} LPC_GPIOINT_TypeDef;
/*------------------------------------ Timer (TIM) -----------------------------------------------------*/
typedef struct
{
__IO uint32_t IR;
__IO uint32_t TCR;
__IO uint32_t TC;
__IO uint32_t PR;
__IO uint32_t PC;
__IO uint32_t MCR;
__IO uint32_t MR0;
__IO uint32_t MR1;
__IO uint32_t MR2;
__IO uint32_t MR3;
__IO uint32_t CCR;
__I uint32_t CR0;
__I uint32_t CR1;
uint32_t RESERVED0[2];
__IO uint32_t EMR;
uint32_t RESERVED1[12];
__IO uint32_t CTCR;
} LPC_TIM_TypeDef;
/*------------- --------------------Pulse-Width Modulation (PWM) ---------------------------------------*/
typedef struct
{
__IO uint32_t IR;
__IO uint32_t TCR;
__IO uint32_t TC;
__IO uint32_t PR;
__IO uint32_t PC;
__IO uint32_t MCR;
__IO uint32_t MR0;
__IO uint32_t MR1;
__IO uint32_t MR2;
__IO uint32_t MR3;
__IO uint32_t CCR;
__I uint32_t CR0;
__I uint32_t CR1;
__I uint32_t CR2;
__I uint32_t CR3;
uint32_t RESERVED0;
__IO uint32_t MR4;
__IO uint32_t MR5;
__IO uint32_t MR6;
__IO uint32_t PCR;
__IO uint32_t LER;
uint32_t RESERVED1[7];
__IO uint32_t CTCR;
} LPC_PWM_TypeDef;
/*----------------------------- Universal Asynchronous Receiver Transmitter (UART) ---------------------*/
typedef struct
{
union {
__I uint8_t RBR;
__O uint8_t THR;
__IO uint8_t DLL;
uint32_t RESERVED0;
};
union {
__IO uint8_t DLM;
__IO uint32_t IER;
};
union {
__I uint32_t IIR;
__O uint8_t FCR;
};
__IO uint8_t LCR;
uint8_t RESERVED1[7];
__I uint8_t LSR;
uint8_t RESERVED2[7];
__IO uint8_t SCR;
uint8_t RESERVED3[3];
__IO uint32_t ACR;
__IO uint8_t ICR;
uint8_t RESERVED4[3];
__IO uint8_t FDR;
uint8_t RESERVED5[7];
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -