init243.gel

TMS320F2407 filter 滤波程序

/* This GEL file is loaded on the command line of Code Composer 
 * The StartUp() function is called every time you start
 * Code Composer.  You can customize this function to
 * initialize wait states or to perform other initialization.
 */

 
StartUp()
{    
 
GEL_MapOn();
GEL_MapReset();  
GEL_MapAdd(0x0000,1,0x005F,1,1);	/* MMRs 								*/
GEL_MapAdd(0x0060,1,0x0020,1,1);	/* On-Chip RAM B2 						*/
GEL_MapAdd(0x0200,1,0x0100,1,1); 	/* On-Chip RAM B0 if CNF=0 				*/
GEL_MapAdd(0x0300,1,0x0100,1,1); 	/* On-Chip RAM B1 						*/
GEL_MapAdd(0x8000,1,0x8000,1,1);	/* External memory 						*/

GEL_MapAdd(0x7010,1,0x000F,1,1);	/* Peripheral - System Config & Control */
GEL_MapAdd(0x7020,1,0x0010,1,1);	/* Peripheral - WDT / RTI 				*/
GEL_MapAdd(0x7030,1,0x0010,1,1);	/* Peripheral - ADC 					*/
GEL_MapAdd(0x7040,1,0x0010,1,1);	/* Peripheral - SPI 					*/
GEL_MapAdd(0x7050,1,0x0010,1,1);	/* Peripheral - SCI 					*/
GEL_MapAdd(0x7070,1,0x0010,1,1);	/* Peripheral - Ext Ints 				*/
GEL_MapAdd(0x7090,1,0x0010,1,1);	/* Peripheral - Digital I/O 			*/
GEL_MapAdd(0x7400,1,0x001D,1,1);	/* Peripheral - Event Mgr 				*/
GEL_MapAdd(0x7420,1,0x0006,1,1);	/* Peripheral - Event Mgr Capture & QEP */
GEL_MapAdd(0x742C,1,0x0009,1,1);	/* Peripheral - Event Mgr Int cntl 		*/

GEL_MapAdd(0x0000,0,0x4000,1,1);	/* Internal Program memory - Flash 		*/
GEL_MapAdd(0x4000,0,0xBE00,1,1); 	/* External Program memory 				*/
GEL_MapAdd(0xFE00,0,0x0100,1,1); 	/* Available if CNF=1 i.e. B0 			*/

GEL_MapAdd(0x0000,2,0x0008,0,1);	/* I/O Memory Mapped DAC Registers 		*/
GEL_MapAdd(0x0008,2,0x0004,1,0);	/* I/O Memory Mapped DIP Switches 		*/
GEL_MapAdd(0x000C,2,0x0004,0,1); 	/* I/O Memory Mapped LEDs 				*/
GEL_MapAdd(0xFFFF,2,0x0001,1,1);	/* Wait-state Generator Register 		*/

GEL_WatchReset();                   /* Clear the active Watch-Window		*/ 

GEL_WatchAdd("*(int *)0x7018@data,x", "SCSR");  
GEL_WatchAdd("*(int *)0x7029@data,x", "WDCR");   
GEL_WatchAdd("*(int *)0x7403@data" , "T1PR");
GEL_WatchAdd("*(int *)0x7417@data" , "CMPR1");
GEL_WatchAdd("*(int *)0x7404@data,x" , "T1CON");
GEL_WatchAdd("*(int *)0x7411@data,x" , "COMCON");
GEL_WatchAdd("*(int *)0x742F@data,x" , "EVIFRA");
GEL_WatchAdd("*(int *)0x742C@data,x" , "EVIMRA");
GEL_WatchAdd("*(int *)0x709e@data,x" , "PDDATDIR");

/*GEL_ProjectBuild();    
GEL_Load("E:\\Borapn3\\F243\\F243led2\\F243led2.out");    */
GEL_Reset();                         /* reset the DSP 						*/ 
GEL_Go(main);                        /* run the code until main				*/

GEL_MemoryFill(0x7029,1,1,0x40);     /* this disables the watchdog			*/
}

menuitem "Watchdog";                 /* Add the submenu "Watchdog" to "GEL" */

hotmenu Disable_Watchdog()
{
    GEL_MemoryFill(0x7029,1,1,0x40); /* A function to disable the watchdog 	*/
}