📄 kmain.lst
字号:
206 =1 Interrupt Vectors:
207 =1 Interrupt Address = (Number * 8) + 3
208 =1 ------------------------------------------------*/
209 =1 #define IE0_VECTOR 0 /* 0x03 External Interrupt 0 */
210 =1 #define TF0_VECTOR 1 /* 0x0B Timer 0 */
211 =1 #define IE1_VECTOR 2 /* 0x13 External Interrupt 1 */
212 =1 #define TF1_VECTOR 3 /* 0x1B Timer 1 */
213 =1 #define SIO_VECTOR 4 /* 0x23 Serial port */
C51 COMPILER V6.20c KMAIN 10/31/2002 21:55:46 PAGE 6
214 =1
215 =1 #define TF2_VECTOR 5 /* 0x2B Timer 2 */
216 =1 #define EX2_VECTOR 5 /* 0x2B External Interrupt 2 */
217 =1
218 =1 /*------------------------------------------------
219 =1 ------------------------------------------------*/
220 =1 #endif
221 =1
222 =1
5
6 #include "khal.h"
1 =1 #include <At89x52.h>
1 =2 /*--------------------------------------------------------------------------
2 =2 AT89X52.H
3 =2
4 =2 Header file for the low voltage Flash Atmel AT89C52 and AT89LV52.
5 =2 Copyright (c) 1995-1996 Keil Software, Inc. All rights reserved.
6 =2 --------------------------------------------------------------------------*/
7 =2
8 =2 #ifndef AT89X52_HEADER_FILE
=2 #define AT89X52_HEADER_FILE 1
=2
=2 /*------------------------------------------------
=2 Byte Registers
=2 ------------------------------------------------*/
=2 sfr P0 = 0x80;
=2 sfr SP = 0x81;
=2 sfr DPL = 0x82;
=2 sfr DPH = 0x83;
=2 sfr PCON = 0x87;
=2 sfr TCON = 0x88;
=2 sfr TMOD = 0x89;
=2 sfr TL0 = 0x8A;
=2 sfr TL1 = 0x8B;
=2 sfr TH0 = 0x8C;
=2 sfr TH1 = 0x8D;
=2 sfr P1 = 0x90;
=2 sfr SCON = 0x98;
=2 sfr SBUF = 0x99;
=2 sfr P2 = 0xA0;
=2 sfr IE = 0xA8;
=2 sfr P3 = 0xB0;
=2 sfr IP = 0xB8;
=2 sfr T2CON = 0xC8;
=2 sfr T2MOD = 0xC9;
=2 sfr RCAP2L = 0xCA;
=2 sfr RCAP2H = 0xCB;
=2 sfr TL2 = 0xCC;
=2 sfr TH2 = 0xCD;
=2 sfr PSW = 0xD0;
=2 sfr ACC = 0xE0;
=2 sfr B = 0xF0;
=2
=2 /*------------------------------------------------
=2 P0 Bit Registers
=2 ------------------------------------------------*/
=2 sbit P0_0 = 0x80;
=2 sbit P0_1 = 0x81;
=2 sbit P0_2 = 0x82;
=2 sbit P0_3 = 0x83;
=2 sbit P0_4 = 0x84;
=2 sbit P0_5 = 0x85;
C51 COMPILER V6.20c KMAIN 10/31/2002 21:55:46 PAGE 7
=2 sbit P0_6 = 0x86;
=2 sbit P0_7 = 0x87;
=2
=2 /*------------------------------------------------
=2 PCON Bit Values
=2 ------------------------------------------------*/
=2 #define IDL_ 0x01
=2
=2 #define STOP_ 0x02
=2 #define PD_ 0x02 /* Alternate definition */
=2
=2 #define GF0_ 0x04
=2 #define GF1_ 0x08
=2 #define SMOD_ 0x80
=2
=2 /*------------------------------------------------
=2 TCON Bit Registers
=2 ------------------------------------------------*/
=2 sbit IT0 = 0x88;
=2 sbit IE0 = 0x89;
=2 sbit IT1 = 0x8A;
=2 sbit IE1 = 0x8B;
=2 sbit TR0 = 0x8C;
=2 sbit TF0 = 0x8D;
=2 sbit TR1 = 0x8E;
=2 sbit TF1 = 0x8F;
=2
=2 /*------------------------------------------------
=2 TMOD Bit Values
=2 ------------------------------------------------*/
=2 #define T0_M0_ 0x01
=2 #define T0_M1_ 0x02
=2 #define T0_CT_ 0x04
=2 #define T0_GATE_ 0x08
=2 #define T1_M0_ 0x10
=2 #define T1_M1_ 0x20
=2 #define T1_CT_ 0x40
=2 #define T1_GATE_ 0x80
=2
=2 #define T1_MASK_ 0xF0
=2 #define T0_MASK_ 0x0F
=2
=2 /*------------------------------------------------
=2 P1 Bit Registers
=2 ------------------------------------------------*/
=2 sbit P1_0 = 0x90;
=2 sbit P1_1 = 0x91;
=2 sbit P1_2 = 0x92;
=2 sbit P1_3 = 0x93;
=2 sbit P1_4 = 0x94;
=2 sbit P1_5 = 0x95;
=2 sbit P1_6 = 0x96;
=2 sbit P1_7 = 0x97;
=2
=2 sbit T2 = 0x90; /* External input to Timer/Counter 2, clock out */
=2 sbit T2EX = 0x91; /* Timer/Counter 2 capture/reload trigger & dir ctl */
=2
=2 /*------------------------------------------------
=2 SCON Bit Registers
=2 ------------------------------------------------*/
=2 sbit RI = 0x98;
=2 sbit TI = 0x99;
C51 COMPILER V6.20c KMAIN 10/31/2002 21:55:46 PAGE 8
=2 sbit RB8 = 0x9A;
=2 sbit TB8 = 0x9B;
=2 sbit REN = 0x9C;
=2 sbit SM2 = 0x9D;
=2 sbit SM1 = 0x9E;
=2 sbit SM0 = 0x9F;
=2
=2 /*------------------------------------------------
=2 P2 Bit Registers
=2 ------------------------------------------------*/
=2 sbit P2_0 = 0xA0;
=2 sbit P2_1 = 0xA1;
=2 sbit P2_2 = 0xA2;
=2 sbit P2_3 = 0xA3;
=2 sbit P2_4 = 0xA4;
=2 sbit P2_5 = 0xA5;
=2 sbit P2_6 = 0xA6;
=2 sbit P2_7 = 0xA7;
=2
=2 /*------------------------------------------------
=2 IE Bit Registers
=2 ------------------------------------------------*/
=2 sbit EX0 = 0xA8; /* 1=Enable External interrupt 0 */
=2 sbit ET0 = 0xA9; /* 1=Enable Timer 0 interrupt */
=2 sbit EX1 = 0xAA; /* 1=Enable External interrupt 1 */
=2 sbit ET1 = 0xAB; /* 1=Enable Timer 1 interrupt */
=2 sbit ES = 0xAC; /* 1=Enable Serial port interrupt */
=2 sbit ET2 = 0xAD; /* 1=Enable Timer 2 interrupt */
=2
=2 sbit EA = 0xAF; /* 0=Disable all interrupts */
=2
=2 /*------------------------------------------------
=2 P3 Bit Registers (Mnemonics & Ports)
=2 ------------------------------------------------*/
=2 sbit P3_0 = 0xB0;
=2 sbit P3_1 = 0xB1;
=2 sbit P3_2 = 0xB2;
=2 sbit P3_3 = 0xB3;
=2 sbit P3_4 = 0xB4;
=2 sbit P3_5 = 0xB5;
=2 sbit P3_6 = 0xB6;
=2 sbit P3_7 = 0xB7;
=2
=2 sbit RXD = 0xB0; /* Serial data input */
=2 sbit TXD = 0xB1; /* Serial data output */
=2 sbit INT0 = 0xB2; /* External interrupt 0 */
=2 sbit INT1 = 0xB3; /* External interrupt 1 */
=2 sbit T0 = 0xB4; /* Timer 0 external input */
=2 sbit T1 = 0xB5; /* Timer 1 external input */
=2 sbit WR = 0xB6; /* External data memory write strobe */
=2 sbit RD = 0xB7; /* External data memory read strobe */
=2
=2 /*------------------------------------------------
=2 IP Bit Registers
=2 ------------------------------------------------*/
=2 sbit PX0 = 0xB8;
=2 sbit PT0 = 0xB9;
=2 sbit PX1 = 0xBA;
=2 sbit PT1 = 0xBB;
=2 sbit PS = 0xBC;
=2 sbit PT2 = 0xBD;
=2
C51 COMPILER V6.20c KMAIN 10/31/2002 21:55:46 PAGE 9
=2 /*------------------------------------------------
=2 T2CON Bit Registers
=2 ------------------------------------------------*/
=2 sbit CP_RL2= 0xC8; /* 0=Reload, 1=Capture select */
=2 sbit C_T2 = 0xC9; /* 0=Timer, 1=Counter */
=2 sbit TR2 = 0xCA; /* 0=Stop timer, 1=Start timer */
=2 sbit EXEN2= 0xCB; /* Timer 2 external enable */
=2 sbit TCLK = 0xCC; /* 0=Serial clock uses Timer 1 overflow, 1=Timer 2 */
=2 sbit RCLK = 0xCD; /* 0=Serial clock uses Timer 1 overflow, 1=Timer 2 */
=2 sbit EXF2 = 0xCE; /* Timer 2 external flag */
=2 sbit TF2 = 0xCF; /* Timer 2 overflow flag */
=2
=2 /*------------------------------------------------
=2 T2MOD Bit Values
=2 ------------------------------------------------*/
=2 #define DCEN_ 0x01 /* 1=Timer 2 can be configured as up/down counter */
=2 #define T2OE_ 0x02 /* Timer 2 output enable */
=2
=2 /*------------------------------------------------
=2 PSW Bit Registers
=2 ------------------------------------------------*/
=2 sbit P = 0xD0;
=2 sbit FL = 0xD1;
=2 sbit OV = 0xD2;
=2 sbit RS0 = 0xD3;
=2 sbit RS1 = 0xD4;
=2 sbit F0 = 0xD5;
=2 sbit AC = 0xD6;
=2 sbit CY = 0xD7;
=2
=2 /*------------------------------------------------
=2 Interrupt Vectors:
=2 Interrupt Address = (Number * 8) + 3
=2 ------------------------------------------------*/
=2 #define IE0_VECTOR 0 /* 0x03 External Interrupt 0 */
=2 #define TF0_VECTOR 1 /* 0x0B Timer 0 */
=2 #define IE1_VECTOR 2 /* 0x13 External Interrupt 1 */
=2 #define TF1_VECTOR 3 /* 0x1B Timer 1 */
=2 #define SIO_VECTOR 4 /* 0x23 Serial port */
=2
=2 #define TF2_VECTOR 5 /* 0x2B Timer 2 */
=2 #define EX2_VECTOR 5 /* 0x2B External Interrupt 2 */
=2
=2 /*------------------------------------------------
=2 ------------------------------------------------*/
=2 #endif
221 =2
222 =2
2 =1
3 =1 #define EPP_PORT P1
4 =1 #define DATA_BUS P0
5 =1
6 =1 sbit MCU_SWM0 = P1^0;
7 =1 sbit MCU_SWM1 = P1^1;
8 =1 sbit MCU_LED0 = P1^2;
9 =1 sbit MCU_LED1 = P1^3;
10 =1
11 =1 sbit MCU_D12CS = P1^6;
12 =1 sbit MCU_D12RST = P1^7;
13 =1
14 =1 sbit D12SUSPD = P3^3;
15 =1
C51 COMPILER V6.20c KMAIN 10/31/2002 21:55:46 PAGE 10
16 =1 #define DISABLE EA=0
17 =1 #define ENABLE EA=1
18 =1
7 #include "kmain.h"
1 =1 /*
2 =1 //*************************************************************************
3 =1 // basic #defines
4 =1 //*************************************************************************
5 =1 */
6 =1 #define MAX_ENDPOINTS (unsigned char)0x3
7 =1
8 =1 //#define EP0_TX_FIFO_SIZE 16
9 =1 //#define EP0_RX_FIFO_SIZE 16
10 =1 #define EP0_PACKET_SIZE 16
11 =1
12 =1 //#define EP1_TX_FIFO_SIZE 4
13 =1 //#define EP1_RX_FIFO_SIZE 4
14 =1 #define EP1_PACKET_SIZE 4
15 =1
16 =1 //#define EP2_TX_FIFO_SIZE 64
17 =1 //#define EP2_RX_FIFO_SIZE 64
18 =1 #define EP2_PACKET_SIZE 64
19 =1
20 =1
21 =1 #define USB_IDLE 0
22 =1 #define USB_TRANSMIT 1
23 =1 #define USB_RECEIVE 2
24 =1
25 =1 #define USB_CLASS_CODE_TEST_CLASS_DEVICE 0xdc
26 =1 #define USB_SUBCLASS_CODE_TEST_CLASS_D12 0xA0
27 =1 #define USB_PROTOCOL_CODE_TEST_CLASS_D12 0xB0
28 =1
29 =1 /*
30 =1 //*************************************************************************
31 =1 // masks
32 =1 //*************************************************************************
33 =1 */
34 =1
35 =1 #define USB_RECIPIENT (unsigned char)0x1F
36 =1 #define USB_RECIPIENT_DEVICE (unsigned char)0x00
37 =1 #define USB_RECIPIENT_INTERFACE (unsigned char)0x01
38 =1 #define USB_RECIPIENT_ENDPOINT (unsigned char)0x02
39 =1
40 =1 #define USB_REQUEST_TYPE_MASK (unsigned char)0x60
41 =1 #define USB_STANDARD_REQUEST (unsigned char)0x00
42 =1 //#define USB_CLASS_REQUEST (unsigned char)0x20
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -