k60-keil

K60-Keil版本（下载安装MDK4.23）

/* ----------------------------------------------------------------------   
* Copyright (C) 2010 ARM Limited. All rights reserved.   
*   
* $Date:        15. July 2011  
* $Revision: 	V1.0.10  
*   
* Project: 	    CMSIS DSP Library   
* Title:	    arm_lms_f32.c   
*   
* Description:	Processing function for the floating-point LMS filter.   
*   
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*  
* Version 1.0.10 2011/7/15 
*    Big Endian support added and Merged M0 and M3/M4 Source code.  
*   
* Version 1.0.3 2010/11/29  
*    Re-organized the CMSIS folders and updated documentation.   
*    
* Version 1.0.2 2010/11/11   
*    Documentation updated.    
*   
* Version 1.0.1 2010/10/05    
*    Production release and review comments incorporated.   
*   
* Version 1.0.0 2010/09/20    
*    Production release and review comments incorporated   
*   
* Version 0.0.7  2010/06/10    
*    Misra-C changes done   
* -------------------------------------------------------------------- */

#include "arm_math.h"

/**   
 * @ingroup groupFilters   
 */

/**   
 * @defgroup LMS Least Mean Square (LMS) Filters   
 *   
 * LMS filters are a class of adaptive filters that are able to "learn" an unknown transfer functions.   
 * LMS filters use a gradient descent method in which the filter coefficients are updated based on the instantaneous error signal.   
 * Adaptive filters are often used in communication systems, equalizers, and noise removal.   
 * The CMSIS DSP Library contains LMS filter functions that operate on Q15, Q31, and floating-point data types.   
 * The library also contains normalized LMS filters in which the filter coefficient adaptation is indepedent of the level of the input signal.   
 *   
 * An LMS filter consists of two components as shown below.   
 * The first component is a standard transversal or FIR filter.   
 * The second component is a coefficient update mechanism.   
 * The LMS filter has two input signals.   
 * The "input" feeds the FIR filter while the "reference input" corresponds to the desired output of the FIR filter.   
 * That is, the FIR filter coefficients are updated so that the output of the FIR filter matches the reference input.   
 * The filter coefficient update mechanism is based on the difference between the FIR filter output and the reference input.   
 * This "error signal" tends towards zero as the filter adapts.   
 * The LMS processing functions accept the input and reference input signals and generate the filter output and error signal.   
 * \image html LMS.gif "Internal structure of the Least Mean Square filter"   
 *   
 * The functions operate on blocks of data and each call to the function processes   
 * <code>blockSize</code> samples through the filter.   
 * <code>pSrc</code> points to input signal, <code>pRef</code> points to reference signal,   
 * <code>pOut</code> points to output signal and <code>pErr</code> points to error signal.   
 * All arrays contain <code>blockSize</code> values.   
 *   
 * The functions operate on a block-by-block basis.   
 * Internally, the filter coefficients <code>b[n]</code> are updated on a sample-by-sample basis.   
 * The convergence of the LMS filter is slower compared to the normalized LMS algorithm.   
 *   
 * \par Algorithm:   
 * The output signal <code>y[n]</code> is computed by a standard FIR filter:   
 * <pre>   
 *     y[n] = b[0] * x[n] + b[1] * x[n-1] + b[2] * x[n-2] + ...+ b[numTaps-1] * x[n-numTaps+1]   
 * </pre>   
 *   
 * \par   
 * The error signal equals the difference between the reference signal <code>d[n]</code> and the filter output:   
 * <pre>   
 *     e[n] = d[n] - y[n].   
 * </pre>   
 *   
 * \par   
 * After each sample of the error signal is computed, the filter coefficients <code>b[k]</code> are updated on a sample-by-sample basis:   
 * <pre>   
 *     b[k] = b[k] + e[n] * mu * x[n-k],  for k=0, 1, ..., numTaps-1   
 * </pre>   
 * where <code>mu</code> is the step size and controls the rate of coefficient convergence.   
 *\par   
 * In the APIs, <code>pCoeffs</code> points to a coefficient array of size <code>numTaps</code>.   
 * Coefficients are stored in time reversed order.   
 * \par   
 * <pre>   
 *    {b[numTaps-1], b[numTaps-2], b[N-2], ..., b[1], b[0]}   
 * </pre>   
 * \par   
 * <code>pState</code> points to a state array of size <code>numTaps + blockSize - 1</code>.   
 * Samples in the state buffer are stored in the order:   
 * \par   
 * <pre>   
 *    {x[n-numTaps+1], x[n-numTaps], x[n-numTaps-1], x[n-numTaps-2]....x[0], x[1], ..., x[blockSize-1]}   
 * </pre>   
 * \par   
 * Note that the length of the state buffer exceeds the length of the coefficient array by <code>blockSize-1</code> samples.   
 * The increased state buffer length allows circular addressing, which is traditionally used in FIR filters,   
 * to be avoided and yields a significant speed improvement.   
 * The state variables are updated after each block of data is processed.   
 * \par Instance Structure   
 * The coefficients and state variables for a filter are stored together in an instance data structure.   
 * A separate instance structure must be defined for each filter and   
 * coefficient and state arrays cannot be shared among instances.   
 * There are separate instance structure declarations for each of the 3 supported data types.   
 *   
 * \par Initialization Functions   
 * There is also an associated initialization function for each data type.   
 * The initialization function performs the following operations:   
 * - Sets the values of the internal structure fields.   
 * - Zeros out the values in the state buffer.   
 * \par   
 * Use of the initialization function is optional.   
 * However, if the initialization function is used, then the instance structure cannot be placed into a const data section.   
 * To place an instance structure into a const data section, the instance structure must be manually initialized.   
 * Set the values in the state buffer to zeros before static initialization.   
 * The code below statically initializes each of the 3 different data type filter instance structures   
 * <pre>   
 *    arm_lms_instance_f32 S = {numTaps, pState, pCoeffs, mu};   
 *    arm_lms_instance_q31 S = {numTaps, pState, pCoeffs, mu, postShift};   
 *    arm_lms_instance_q15 S = {numTaps, pState, pCoeffs, mu, postShift};   
 * </pre>   
 * where <code>numTaps</code> is the number of filter coefficients in the filter; <code>pState</code> is the address of the state buffer;   
 * <code>pCoeffs</code> is the address of the coefficient buffer; <code>mu</code> is the step size parameter; and <code>postShift</code> is the shift applied to coefficients.   
 *   
 * \par Fixed-Point Behavior:   
 * Care must be taken when using the Q15 and Q31 versions of the LMS filter.   
 * The following issues must be considered:   
 * - Scaling of coefficients   
 * - Overflow and saturation   
 *   
 * \par Scaling of Coefficients:   
 * Filter coefficients are represented as fractional values and   
 * coefficients are restricted to lie in the range <code>[-1 +1)</code>.   
 * The fixed-point functions have an additional scaling parameter <code>postShift</code>.   
 * At the output of the filter's accumulator is a shift register which shifts the result by <code>postShift</code> bits.   
 * This essentially scales the filter coefficients by <code>2^postShift</code> and   
 * allows the filter coefficients to exceed the range <code>[+1 -1)</code>.   
 * The value of <code>postShift</code> is set by the user based on the expected gain through the system being modeled.   
 *   
 * \par Overflow and Saturation:   
 * Overflow and saturation behavior of the fixed-point Q15 and Q31 versions are   
 * described separately as part of the function specific documentation below.   
 */

/**   
 * @addtogroup LMS   
 * @{   
 */

/**          
 * @details          
 * This function operates on floating-point data types.      
 *   
 * @brief Processing function for floating-point LMS filter.   
 * @param[in]  *S points to an instance of the floating-point LMS filter structure.   
 * @param[in]  *pSrc points to the block of input data.   
 * @param[in]  *pRef points to the block of reference data.   
 * @param[out] *pOut points to the block of output data.   
 * @param[out] *pErr points to the block of error data.   
 * @param[in]  blockSize number of samples to process.   
 * @return     none.   
 */

void arm_lms_f32(
  const arm_lms_instance_f32 * S,
  float32_t * pSrc,
  float32_t * pRef,
  float32_t * pOut,
  float32_t * pErr,
  uint32_t blockSize)
{
  float32_t *pState = S->pState;                 /* State pointer */
  float32_t *pCoeffs = S->pCoeffs;               /* Coefficient pointer */
  float32_t *pStateCurnt;                        /* Points to the current sample of the state */
  float32_t *px, *pb;                            /* Temporary pointers for state and coefficient buffers */
  float32_t mu = S->mu;                          /* Adaptive factor */
  uint32_t numTaps = S->numTaps;                 /* Number of filter coefficients in the filter */
  uint32_t tapCnt, blkCnt;                       /* Loop counters */
  float32_t sum, e, d;                           /* accumulator, error, reference data sample */
  float32_t w = 0.0f;                            /* weight factor */

  e = 0.0f;
  d = 0.0f;

  /* S->pState points to state array which contains previous frame (numTaps - 1) samples */
  /* pStateCurnt points to the location where the new input data should be written */
  pStateCurnt = &(S->pState[(numTaps - 1u)]);

  blkCnt = blockSize;


#ifndef ARM_MATH_CM0

  /* Run the below code for Cortex-M4 and Cortex-M3 */

  while(blkCnt > 0u)
  {
    /* Copy the new input sample into the state buffer */
    *pStateCurnt++ = *pSrc++;

    /* Initialize pState pointer */
    px = pState;

    /* Initialize coeff pointer */
    pb = (pCoeffs);

    /* Set the accumulator to zero */
    sum = 0.0f;

    /* Loop unrolling.  Process 4 taps at a time. */
    tapCnt = numTaps >> 2;

    while(tapCnt > 0u)
    {
      /* Perform the multiply-accumulate */
      sum += (*px++) * (*pb++);
      sum += (*px++) * (*pb++);
      sum += (*px++) * (*pb++);
      sum += (*px++) * (*pb++);

      /* Decrement the loop counter */
      tapCnt--;
    }

    /* If the filter length is not a multiple of 4, compute the remaining filter taps */
    tapCnt = numTaps % 0x4u;

    while(tapCnt > 0u)
    {
      /* Perform the multiply-accumulate */
      sum += (*px++) * (*pb++);

      /* Decrement the loop counter */
      tapCnt--;
    }

    /* The result in the accumulator, store in the destination buffer. */
    *pOut++ = sum;

    /* Compute and store error */
    d = (float32_t) (*pRef++);
    e = d - sum;
    *pErr++ = e;

    /* Calculation of Weighting factor for the updating filter coefficients */
    w = e * mu;

    /* Initialize pState pointer */
    px = pState;

    /* Initialize coeff pointer */
    pb = (pCoeffs);

    /* Loop unrolling.  Process 4 taps at a time. */
    tapCnt = numTaps >> 2;

    /* Update filter coefficients */
    while(tapCnt > 0u)
    {
      /* Perform the multiply-accumulate */
      *pb = *pb + (w * (*px++));
      pb++;

      *pb = *pb + (w * (*px++));
      pb++;

      *pb = *pb + (w * (*px++));
      pb++;

      *pb = *pb + (w * (*px++));
      pb++;

      /* Decrement the loop counter */
      tapCnt--;
    }

    /* If the filter length is not a multiple of 4, compute the remaining filter taps */
    tapCnt = numTaps % 0x4u;

    while(tapCnt > 0u)
    {
      /* Perform the multiply-accumulate */
      *pb = *pb + (w * (*px++));
      pb++;

      /* Decrement the loop counter */
      tapCnt--;
    }

    /* Advance state pointer by 1 for the next sample */
    pState = pState + 1;

    /* Decrement the loop counter */
    blkCnt--;
  }


  /* Processing is complete. Now copy the last numTaps - 1 samples to the   
     satrt of the state buffer. This prepares the state buffer for the   
     next function call. */

  /* Points to the start of the pState buffer */
  pStateCurnt = S->pState;

  /* Loop unrolling for (numTaps - 1u) samples copy */
  tapCnt = (numTaps - 1u) >> 2u;

  /* copy data */
  while(tapCnt > 0u)
  {
    *pStateCurnt++ = *pState++;
    *pStateCurnt++ = *pState++;
    *pStateCurnt++ = *pState++;
    *pStateCurnt++ = *pState++;

    /* Decrement the loop counter */
    tapCnt--;
  }

  /* Calculate remaining number of copies */
  tapCnt = (numTaps - 1u) % 0x4u;

  /* Copy the remaining q31_t data */
  while(tapCnt > 0u)
  {
    *pStateCurnt++ = *pState++;

    /* Decrement the loop counter */
    tapCnt--;
  }

#else

  /* Run the below code for Cortex-M0 */

  while(blkCnt > 0u)
  {
    /* Copy the new input sample into the state buffer */
    *pStateCurnt++ = *pSrc++;

    /* Initialize pState pointer */
    px = pState;

    /* Initialize pCoeffs pointer */
    pb = pCoeffs;

    /* Set the accumulator to zero */
    sum = 0.0f;

    /* Loop over numTaps number of values */
    tapCnt = numTaps;

    while(tapCnt > 0u)
    {
      /* Perform the multiply-accumulate */
      sum += (*px++) * (*pb++);

      /* Decrement the loop counter */
      tapCnt--;
    }

    /* The result is stored in the destination buffer. */
    *pOut++ = sum;

    /* Compute and store error */
    d = (float32_t) (*pRef++);
    e = d - sum;
    *pErr++ = e;

    /* Weighting factor for the LMS version */
    w = e * mu;

    /* Initialize pState pointer */
    px = pState;

    /* Initialize pCoeffs pointer */
    pb = pCoeffs;

    /* Loop over numTaps number of values */
    tapCnt = numTaps;

    while(tapCnt > 0u)
    {
      /* Perform the multiply-accumulate */
      *pb = *pb + (w * (*px++));
      pb++;

      /* Decrement the loop counter */
      tapCnt--;
    }

    /* Advance state pointer by 1 for the next sample */
    pState = pState + 1;

    /* Decrement the loop counter */
    blkCnt--;
  }


  /* Processing is complete. Now copy the last numTaps - 1 samples to the       
   * start of the state buffer. This prepares the state buffer for the       
   * next function call. */

  /* Points to the start of the pState buffer */
  pStateCurnt = S->pState;

  /*  Copy (numTaps - 1u) samples  */
  tapCnt = (numTaps - 1u);

  /* Copy the data */
  while(tapCnt > 0u)
  {
    *pStateCurnt++ = *pState++;

    /* Decrement the loop counter */
    tapCnt--;
  }

#endif /*   #ifndef ARM_MATH_CM0 */

}

/**   
   * @} end of LMS group   
   */