dsp28_sci.h

DSP2812的串口自收自发程序。本程序采用的是查询方式。简单好用。

//
//      TMDX ALPHA RELEASE
//      Intended for product evaluation purposes
//
//###########################################################################
//
// FILE:	DSP28_Sci.h
//
// TITLE:	DSP28 Device SCI Register Definitions.
//
//###########################################################################
//
//  Ver | dd mmm yyyy | Who  | Description of changes
// =====|=============|======|===============================================
//  0.55| 06 May 2002 | L.H. | EzDSP Alpha Release
//  0.56| 20 May 2002 | L.H. | No change
//  0.57| 27 May 2002 | L.H. | No change
//###########################################################################

#ifndef DSP28_SCI_H
#define DSP28_SCI_H

//---------------------------------------------------------------------------
// SCI Individual Register Bit Definitions

//----------------------------------------------------------
// SCICCR communication control register bit definitions:
//
                                              
struct  SCICCR_BITS {      // bit    description
   Uint16 SCICHAR:3;         // 2:0    Character length control        
   Uint16 ADDRIDLE_MODE:1;   // 3      ADDR/IDLE Mode control
   Uint16 LOOPBKENA:1;       // 4      Loop Back enable
   Uint16 PARITYENA:1;       // 5      Parity enable   
   Uint16 PARITY:1;          // 6      Even or Odd Parity
   Uint16 STOPBITS:1;        // 7      Number of Stop Bits
   Uint16 rsvd1:8;           // 15:8   reserved
}; 

union SCICCR_REG {
   Uint16                all;
   struct SCICCR_BITS  bit;
};

//-------------------------------------------
// SCICTL1 control register 1 bit definitions:
//
                       
struct  SCICTL1_BITS {     // bit    description
   Uint16 RXENA:1;           // 0      SCI receiver enable
   Uint16 TXENA:1;           // 1      SCI transmitter enable
   Uint16 SLEEP:1;           // 2      SCI sleep  
   Uint16 TXWAKE:1;          // 3      Transmitter wakeup method
   Uint16 rsvd:1;            // 4      reserved
   Uint16 SWRESET:1;         // 5      Software reset   
   Uint16 RXERRINTENA:1;     // 6      Recieve interrupt enable
   Uint16 rsvd1:9;           // 15:7   reserved

}; 

union SCICTL1_REG {
   Uint16                 all;
   struct SCICTL1_BITS  bit;
};

//---------------------------------------------
// SCICTL2 control register 2 bit definitions:
// 

struct  SCICTL2_BITS {     // bit    description
   Uint16 TXINTENA:1;        // 0      Transmit interrupt enable    
   Uint16 RXBKINTENA:1;      // 1      Receiver-buffer break enable
   Uint16 rsvd:4;            // 5:2    reserved
   Uint16 TXEMPTY:1;         // 6      Transmitter empty flag
   Uint16 TXRDY:1;           // 7      Transmitter ready flag  
   Uint16 rsvd1:8;           // 15:8   reserved

}; 

union SCICTL2_REG {
   Uint16                 all;
   struct SCICTL2_BITS  bit;
};

//---------------------------------------------------
// SCIRXST Receiver status register bit definitions:
//

struct  SCIRXST_BITS {     // bit    description
   Uint16 rsvd:1;            // 0      reserved
   Uint16 RXWAKE:1;          // 1      Receiver wakeup detect flag
   Uint16 PE:1;              // 2      Parity error flag
   Uint16 OE:1;              // 3      Overrun error flag
   Uint16 FE:1;              // 4      Framing error flag
   Uint16 BRKDT:1;           // 5      Break-detect flag   
   Uint16 RXRDY:1;           // 6      Receiver ready flag
   Uint16 RXERR:1;           // 7      Receiver error flag

}; 

union SCIRXST_REG {
   Uint16                 all;
   struct SCIRXST_BITS  bit;
};

//----------------------------------------------------
// SCIRXBUF Receiver Data Buffer with FIFO bit definitions:
// 

struct  SCIRXBUF_BITS {    // bits   description
   Uint16 RXDT:8;            // 7:0    Receive word
   Uint16 rsvd:6;            // 13:8   reserved
   Uint16 SCIFFPE:1;         // 14     SCI PE error in FIFO mode
   Uint16 SCIFFFE:1;         // 15     SCI FE error in FIFO mode
};

union SCIRXBUF_REG {
   Uint16                  all;
   struct SCIRXBUF_BITS  bit;
};

//--------------------------------------------------
// SCIPRI Priority control register bit definitions:
// 
//
                                                   
struct  SCIPRI_BITS {      // bit    description
   Uint16 rsvd:3;            // 2:0    reserved
   Uint16 FREE:1;            // 3      Free emulation suspend mode
   Uint16 SOFT:1;            // 4      Soft emulation suspend mode
   Uint16 rsvd1:3;           // 7:5    reserved
}; 

union SCIPRI_REG {
   Uint16                all;
   struct SCIPRI_BITS  bit;
};

//-------------------------------------------------
// SCI FIFO Transmit register bit definitions:
// 
//
                                                  
struct  SCIFFTX_BITS {     // bit    description
   Uint16 TXFFILIL:5;        // 4:0    Interrupt level
   Uint16 TXFFIENA:1;        // 5      Interrupt enable
   Uint16 TXINTCLR:1;        // 6      Clear INT flag
   Uint16 TXFFINT:1;         // 7      INT flag
   Uint16 TXFFST:5;          // 12:8   FIFO status
   Uint16 TXFIFOXRESET:1;    // 13     FIFO reset
   Uint16 SCIFFENA:1;        // 14     Enhancement enable
   Uint16 resvd:1;           // 15     reserved

}; 

union SCIFFTX_REG {
   Uint16                 all;
   struct SCIFFTX_BITS  bit;
};

//------------------------------------------------
// SCI FIFO recieve register bit definitions:
// 
//
                                               
struct  SCIFFRX_BITS {     // bits   description
   Uint16 RXFFIL:5;          // 4:0    Interrupt level
   Uint16 RXFFIENA:1;        // 5      Interrupt enable
   Uint16 RXFFINTCLR:1;      // 6      Clear INT flag
   Uint16 RXFFINT:1;         // 7      INT flag
   Uint16 RXFIFST:5;         // 12:8   FIFO status
   Uint16 RXFIFORESET:1;     // 13     FIFO reset
   Uint16 RXOVF_CLR:1;       // 14     Clear overflow
   Uint16 RXFFOVF:1;         // 15     FIFO overflow

}; 

union SCIFFRX_REG {
   Uint16                 all;
   struct SCIFFRX_BITS  bit;
};

// SCI FIFO control register bit definitions:
struct  SCIFFCT_BITS {     // bits   description
   Uint16 FFTXDLY:8;         // 7:0    FIFO transmit delay
   Uint16 rsvd:5;            // 12:8   reserved
   Uint16 CDC:1;             // 13     Auto baud mode enable
   Uint16 ABDCLR:1;          // 14     Auto baud clear
   Uint16 ABD:1;             // 15     Auto baud detect
};

union SCIFFCT_REG {
   Uint16                 all;
   struct SCIFFCT_BITS  bit;
};

//---------------------------------------------------------------------------
// SCI Register File:
//
struct  SCI_REGS {
   union SCICCR_REG     SCICCR;     // Communications control register
   union SCICTL1_REG    SCICTL1;    // Control register 1
   Uint16               SCIHBAUD;   // Baud rate (high) register
   Uint16               SCILBAUD;   // Baud rate (low) register
   union SCICTL2_REG    SCICTL2;    // Control register 2
   union SCIRXST_REG    SCIRXST;    // Recieve status register
   Uint16               SCIRXEMU;   // Recieve emulation buffer register
   union SCIRXBUF_REG   SCIRXBUF;   // Recieve data buffer  
   Uint16  rsvd1;                   // reserved
   Uint16               SCITXBUF;   // Transmit data buffer 
   union SCIFFTX_REG    SCIFFTX;    // FIFO transmit register
   union SCIFFRX_REG    SCIFFRX;    // FIFO recieve register
   union SCIFFCT_REG    SCIFFCT;    // FIFO control register
   Uint16 rsvd2;                    // reserved
   Uint16 rsvd3;                    // reserved
   union SCIPRI_REG      SCIPRI;    // FIFO Priority control   
};

//---------------------------------------------------------------------------
// SCI External References & Function Declarations:
//
extern volatile struct SCI_REGS SciaRegs;
extern volatile struct SCI_REGS ScibRegs;

extern unsigned int Sci_VarRx[100];
extern unsigned int i,j;
extern unsigned int Send_Flag;

#endif  // end of DSP28_SCI_H definition

//===========================================================================
// No more.
//===========================================================================