op-common.h

ARM8008光盘linux-kernel

/*
 * BK Id: SCCS/s.op-common.h 1.5 05/17/01 18:14:23 cort
 */

#define _FP_DECL(wc, X)			\
  _FP_I_TYPE X##_c, X##_s, X##_e;	\
  _FP_FRAC_DECL_##wc(X)

/*
 * Finish truely unpacking a native fp value by classifying the kind
 * of fp value and normalizing both the exponent and the fraction.
 */

#define _FP_UNPACK_CANONICAL(fs, wc, X)					\
do {									\
  switch (X##_e)							\
  {									\
  default:								\
    _FP_FRAC_HIGH_##wc(X) |= _FP_IMPLBIT_##fs;				\
    _FP_FRAC_SLL_##wc(X, _FP_WORKBITS);					\
    X##_e -= _FP_EXPBIAS_##fs;						\
    X##_c = FP_CLS_NORMAL;						\
    break;								\
									\
  case 0:								\
    if (_FP_FRAC_ZEROP_##wc(X))						\
      X##_c = FP_CLS_ZERO;						\
    else								\
      {									\
	/* a denormalized number */					\
	_FP_I_TYPE _shift;						\
	_FP_FRAC_CLZ_##wc(_shift, X);					\
	_shift -= _FP_FRACXBITS_##fs;					\
	_FP_FRAC_SLL_##wc(X, (_shift+_FP_WORKBITS));			\
	X##_e -= _FP_EXPBIAS_##fs - 1 + _shift;				\
	X##_c = FP_CLS_NORMAL;						\
      }									\
    break;								\
									\
  case _FP_EXPMAX_##fs:							\
    if (_FP_FRAC_ZEROP_##wc(X))						\
      X##_c = FP_CLS_INF;						\
    else								\
      /* we don't differentiate between signaling and quiet nans */	\
      X##_c = FP_CLS_NAN;						\
    break;								\
  }									\
} while (0)


/*
 * Before packing the bits back into the native fp result, take care
 * of such mundane things as rounding and overflow.  Also, for some
 * kinds of fp values, the original parts may not have been fully
 * extracted -- but that is ok, we can regenerate them now.
 */

#define _FP_PACK_CANONICAL(fs, wc, X)				\
({int __ret = 0;						\
  switch (X##_c)						\
  {								\
  case FP_CLS_NORMAL:						\
    X##_e += _FP_EXPBIAS_##fs;					\
    if (X##_e > 0)						\
      {								\
	__ret |= _FP_ROUND(wc, X);				\
	if (_FP_FRAC_OVERP_##wc(fs, X))				\
	  {							\
	    _FP_FRAC_SRL_##wc(X, (_FP_WORKBITS+1));		\
	    X##_e++;						\
	  }							\
	else							\
	  _FP_FRAC_SRL_##wc(X, _FP_WORKBITS);			\
	if (X##_e >= _FP_EXPMAX_##fs)				\
	  {							\
	    /* overflow to infinity */				\
	    X##_e = _FP_EXPMAX_##fs;				\
	    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);		\
            __ret |= EFLAG_OVERFLOW;				\
	  }							\
      }								\
    else							\
      {								\
	/* we've got a denormalized number */			\
	X##_e = -X##_e + 1;					\
	if (X##_e <= _FP_WFRACBITS_##fs)			\
	  {							\
	    _FP_FRAC_SRS_##wc(X, X##_e, _FP_WFRACBITS_##fs);	\
	    __ret |= _FP_ROUND(wc, X);				\
	    _FP_FRAC_SLL_##wc(X, 1);				\
	    if (_FP_FRAC_OVERP_##wc(fs, X))			\
	      {							\
	        X##_e = 1;					\
	        _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);	\
	      }							\
	    else						\
	      {							\
		X##_e = 0;					\
		_FP_FRAC_SRL_##wc(X, _FP_WORKBITS+1);		\
                __ret |= EFLAG_UNDERFLOW;			\
	      }							\
	  }							\
	else							\
	  {							\
	    /* underflow to zero */				\
	    X##_e = 0;						\
	    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);		\
            __ret |= EFLAG_UNDERFLOW;				\
	  }							\
      }								\
    break;							\
								\
  case FP_CLS_ZERO:						\
    X##_e = 0;							\
    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);			\
    break;							\
								\
  case FP_CLS_INF:						\
    X##_e = _FP_EXPMAX_##fs;					\
    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);			\
    break;							\
								\
  case FP_CLS_NAN:						\
    X##_e = _FP_EXPMAX_##fs;					\
    if (!_FP_KEEPNANFRACP)					\
      {								\
	_FP_FRAC_SET_##wc(X, _FP_NANFRAC_##fs);			\
	X##_s = 0;						\
      }								\
    else							\
      _FP_FRAC_HIGH_##wc(X) |= _FP_QNANBIT_##fs;		\
    break;							\
  }								\
  __ret;							\
})


/*
 * Main addition routine.  The input values should be cooked.
 */

#define _FP_ADD(fs, wc, R, X, Y)					     \
do {									     \
  switch (_FP_CLS_COMBINE(X##_c, Y##_c))				     \
  {									     \
  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL):			     \
    {									     \
      /* shift the smaller number so that its exponent matches the larger */ \
      _FP_I_TYPE diff = X##_e - Y##_e;					     \
									     \
      if (diff < 0)							     \
	{								     \
	  diff = -diff;							     \
	  if (diff <= _FP_WFRACBITS_##fs)				     \
	    _FP_FRAC_SRS_##wc(X, diff, _FP_WFRACBITS_##fs);		     \
	  else if (!_FP_FRAC_ZEROP_##wc(X))				     \
	    _FP_FRAC_SET_##wc(X, _FP_MINFRAC_##wc);			     \
	  else								     \
	    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);			     \
	  R##_e = Y##_e;						     \
	}								     \
      else								     \
	{								     \
	  if (diff > 0)							     \
	    {								     \
	      if (diff <= _FP_WFRACBITS_##fs)				     \
	        _FP_FRAC_SRS_##wc(Y, diff, _FP_WFRACBITS_##fs);		     \
	      else if (!_FP_FRAC_ZEROP_##wc(Y))				     \
	        _FP_FRAC_SET_##wc(Y, _FP_MINFRAC_##wc);			     \
	      else							     \
	        _FP_FRAC_SET_##wc(Y, _FP_ZEROFRAC_##wc);		     \
	    }								     \
	  R##_e = X##_e;						     \
	}								     \
									     \
      R##_c = FP_CLS_NORMAL;						     \
									     \
      if (X##_s == Y##_s)						     \
	{								     \
	  R##_s = X##_s;						     \
	  _FP_FRAC_ADD_##wc(R, X, Y);					     \
	  if (_FP_FRAC_OVERP_##wc(fs, R))				     \
	    {								     \
	      _FP_FRAC_SRS_##wc(R, 1, _FP_WFRACBITS_##fs);		     \
	      R##_e++;							     \
	    }								     \
	}								     \
      else								     \
	{								     \
	  R##_s = X##_s;						     \
	  _FP_FRAC_SUB_##wc(R, X, Y);					     \
	  if (_FP_FRAC_ZEROP_##wc(R))					     \
	    {								     \
	      /* return an exact zero */				     \
	      if (FP_ROUNDMODE == FP_RND_MINF)				     \
		R##_s |= Y##_s;						     \
	      else							     \
		R##_s &= Y##_s;						     \
	      R##_c = FP_CLS_ZERO;					     \
	    }								     \
	  else								     \
	    {								     \
	      if (_FP_FRAC_NEGP_##wc(R))				     \
		{							     \
		  _FP_FRAC_SUB_##wc(R, Y, X);				     \
		  R##_s = Y##_s;					     \
		}							     \
									     \
	      /* renormalize after subtraction */			     \
	      _FP_FRAC_CLZ_##wc(diff, R);				     \
	      diff -= _FP_WFRACXBITS_##fs;				     \
	      if (diff)							     \
		{							     \
		  R##_e -= diff;					     \
		  _FP_FRAC_SLL_##wc(R, diff);				     \
		}							     \
	    }								     \
	}								     \
      break;								     \
    }									     \
									     \
  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN):				     \
    _FP_CHOOSENAN(fs, wc, R, X, Y);					     \
    break;								     \
									     \
  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO):			     \
    R##_e = X##_e;							     \
  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL):			     \
  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF):				     \
  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO):				     \
    _FP_FRAC_COPY_##wc(R, X);						     \
    R##_s = X##_s;							     \
    R##_c = X##_c;							     \
    break;								     \
									     \
  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL):			     \
    R##_e = Y##_e;							     \
  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN):			     \
  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN):				     \
  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN):				     \
    _FP_FRAC_COPY_##wc(R, Y);						     \
    R##_s = Y##_s;							     \
    R##_c = Y##_c;							     \
    break;								     \
									     \
  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF):				     \
    if (X##_s != Y##_s)							     \
      {									     \
	/* +INF + -INF => NAN */					     \
	_FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);				     \
	R##_s = X##_s ^ Y##_s;						     \
	R##_c = FP_CLS_NAN;						     \
	break;								     \
      }									     \
    /* FALLTHRU */							     \
									     \
  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL):			     \
  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO):				     \
    R##_s = X##_s;							     \
    R##_c = FP_CLS_INF;							     \
    break;								     \
									     \
  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF):			     \
  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF):				     \
    R##_s = Y##_s;							     \
    R##_c = FP_CLS_INF;							     \
    break;								     \
									     \
  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO):			     \
    /* make sure the sign is correct */					     \
    if (FP_ROUNDMODE == FP_RND_MINF)					     \
      R##_s = X##_s | Y##_s;						     \
    else								     \
      R##_s = X##_s & Y##_s;						     \
    R##_c = FP_CLS_ZERO;						     \
    break;								     \
									     \
  default:								     \
    abort();								     \
  }									     \
} while (0)


/*
 * Main negation routine.  FIXME -- when we care about setting exception
 * bits reliably, this will not do.  We should examine all of the fp classes.
 */

#define _FP_NEG(fs, wc, R, X)		\
  do {					\
    _FP_FRAC_COPY_##wc(R, X);		\
    R##_c = X##_c;			\
    R##_e = X##_e;			\
    R##_s = 1 ^ X##_s;			\
  } while (0)


/*
 * Main multiplication routine.  The input values should be cooked.
 */

#define _FP_MUL(fs, wc, R, X, Y)			\
do {							\
  R##_s = X##_s ^ Y##_s;				\
  switch (_FP_CLS_COMBINE(X##_c, Y##_c))		\
  {							\
  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL):	\
    R##_c = FP_CLS_NORMAL;				\
    R##_e = X##_e + Y##_e + 1;				\
							\
    _FP_MUL_MEAT_##fs(R,X,Y);				\
							\
    if (_FP_FRAC_OVERP_##wc(fs, R))			\
      _FP_FRAC_SRS_##wc(R, 1, _FP_WFRACBITS_##fs);	\
    else						\
      R##_e--;						\
    break;						\
							\
  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN):		\
    _FP_CHOOSENAN(fs, wc, R, X, Y);			\
    break;						\
							\
  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL):	\
  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF):		\
  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO):		\
    R##_s = X##_s;					\
							\
  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF):		\
  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL):	\
  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL):	\
  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO):	\
    _FP_FRAC_COPY_##wc(R, X);				\
    R##_c = X##_c;					\
    break;						\
							\
  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN):	\
  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN):		\
  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN):		\
    R##_s = Y##_s;					\
							\
  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF):	\
  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO):	\
    _FP_FRAC_COPY_##wc(R, Y);				\
    R##_c = Y##_c;					\
    break;						\
							\
  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO):		\