⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 s3c2410-uda1341_c.txt

📁 2410uda1341的测试代码
💻 TXT
📖 第 1 页 / 共 4 页
字号:
#include <linux/module.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/poll.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/sound.h>
#include <linux/soundcard.h>

#include <linux/pm.h>

#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/semaphore.h>
#include <asm/dma.h>
#include <asm/arch/dma.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-iis.h>
#include <asm/hardware/clock.h>
#include <asm/arch/regs-clock.h>
#include <linux/dma-mapping.h>
#include <asm/dma-mapping.h>
#include <asm/arch/hardware.h>
#include <asm/arch/map.h>
#include <config/arch/s3c2410.h>
#define PFX "s3c2410-uda1341: "

#define MAX_DMA_CHANNELS        0

/* The S3C2410 has four internal DMA channels. */

#define MAX_S3C2410_DMA_CHANNELS        S3C2410_DMA_CHANNELS

#define DMA_CH0                        0
#define DMA_CH1                        1
#define DMA_CH2                        2
#define DMA_CH3                        3

#define DMA_BUF_WR                1
#define DMA_BUF_RD                0


#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))


static struct clk        *iis_clock;
static void __iomem        *iis_base;

static struct s3c2410_dma_client s3c2410iis_dma_out= {
        .name                = "I2SSDO",
};

static struct s3c2410_dma_client s3c2410iis_dma_in = {
        .name                = "I2SSDI",
};


#ifdef DEBUG
#define DPRINTK printk
#else
#define DPRINTK( x... )
#endif

static void init_s3c2410_iis_bus_rx(void);
static void init_s3c2410_iis_bus_tx(void);

#define DEF_VOLUME      65

/* UDA1341 Register bits */
#define UDA1341_ADDR                0x14

#define UDA1341_REG_DATA0        (UDA1341_ADDR + 0)
#define UDA1341_REG_STATUS        (UDA1341_ADDR + 2)

/* status control */
#define STAT0                        (0x00)
#define STAT0_RST               (1 << 6)
#define STAT0_SC_MASK           (3 << 4)
#define STAT0_SC_512FS          (0 << 4)
#define STAT0_SC_384FS          (1 << 4)
#define STAT0_SC_256FS          (2 << 4)
#define STAT0_IF_MASK           (7 << 1)
#define STAT0_IF_I2S            (0 << 1)
#define STAT0_IF_LSB16          (1 << 1)
#define STAT0_IF_LSB18          (2 << 1)
#define STAT0_IF_LSB20          (3 << 1)
#define STAT0_IF_MSB            (4 << 1)
#define STAT0_IF_LSB16MSB       (5 << 1)
#define STAT0_IF_LSB18MSB       (6 << 1)
#define STAT0_IF_LSB20MSB       (7 << 1)
#define STAT0_DC_FILTER         (1 << 0)
#define STAT0_DC_NO_FILTER        (0 << 0)

#define STAT1                        (0x80)
#define STAT1_DAC_GAIN          (1 << 6)        /* gain of DAC */
#define STAT1_ADC_GAIN          (1 << 5)        /* gain of ADC */
#define STAT1_ADC_POL           (1 << 4)        /* polarity of ADC */
#define STAT1_DAC_POL           (1 << 3)        /* polarity of DAC */
#define STAT1_DBL_SPD           (1 << 2)        /* double speed playback */
#define STAT1_ADC_ON            (1 << 1)        /* ADC powered */
#define STAT1_DAC_ON            (1 << 0)        /* DAC powered */

/* data0 direct control */
#define DATA0                     (0x00)
#define DATA0_VOLUME_MASK       (0x3f)
#define DATA0_VOLUME(x)         (x)

#define DATA1                     (0x40)
#define DATA1_BASS(x)           ((x) << 2)
#define DATA1_BASS_MASK         (15 << 2)
#define DATA1_TREBLE(x)         ((x))
#define DATA1_TREBLE_MASK       (3)

#define DATA2                     (0x80)
#define DATA2_PEAKAFTER         (0x1 << 5)
#define DATA2_DEEMP_NONE        (0x0 << 3)
#define DATA2_DEEMP_32KHz       (0x1 << 3)
#define DATA2_DEEMP_44KHz       (0x2 << 3)
#define DATA2_DEEMP_48KHz       (0x3 << 3)
#define DATA2_MUTE              (0x1 << 2)
#define DATA2_FILTER_FLAT       (0x0 << 0)
#define DATA2_FILTER_MIN        (0x1 << 0)
#define DATA2_FILTER_MAX        (0x3 << 0)
/* data0 extend control */
#define EXTADDR(n)              (0xc0 | (n))
#define EXTDATA(d)              (0xe0 | (d))

#define EXT0                    0
#define EXT0_CH1_GAIN(x)        (x)
#define EXT1                    1
#define EXT1_CH2_GAIN(x)        (x)
#define EXT2                    2
#define EXT2_MIC_GAIN_MASK      (7 << 2)
#define EXT2_MIC_GAIN(x)        ((x) << 2)
#define EXT2_MIXMODE_DOUBLEDIFF (0)
#define EXT2_MIXMODE_CH1        (1)
#define EXT2_MIXMODE_CH2        (2)
#define EXT2_MIXMODE_MIX        (3)
#define EXT4                    4
#define EXT4_AGC_ENABLE         (1 << 4)
#define EXT4_INPUT_GAIN_MASK    (3)
#define EXT4_INPUT_GAIN(x)      ((x) & 3)
#define EXT5                    5
#define EXT5_INPUT_GAIN(x)      ((x) >> 2)
#define EXT6                    6
#define EXT6_AGC_CONSTANT_MASK  (7 << 2)
#define EXT6_AGC_CONSTANT(x)    ((x) << 2)
#define EXT6_AGC_LEVEL_MASK     (3)
#define EXT6_AGC_LEVEL(x)       (x)

#define AUDIO_NAME                "UDA1341"
#define AUDIO_NAME_VERBOSE        "UDA1341 audio driver"

#define AUDIO_FMT_MASK          (AFMT_S16_LE)
#define AUDIO_FMT_DEFAULT       (AFMT_S16_LE)

#define AUDIO_CHANNELS_DEFAULT        2
#define AUDIO_RATE_DEFAULT        44100

#define AUDIO_NBFRAGS_DEFAULT        8
#define AUDIO_FRAGSIZE_DEFAULT        8192

#define S_CLOCK_FREQ        384
#define PCM_ABS(a) (a < 0 ? -a : a)

typedef struct {
        int size;                /* buffer size */
        char *start;                /* point to actual buffer */
        dma_addr_t dma_addr;        /* physical buffer address */
        struct semaphore sem;        /* down before touching the buffer */
        int master;                /* owner for buffer allocation, contain size when true */
} audio_buf_t;

typedef struct {
        audio_buf_t *buffers;        /* pointer to audio buffer structures */
        audio_buf_t *buf;        /* current buffer used by read/write */
        u_int buf_idx;                /* index for the pointer above */
        u_int fragsize;                /* fragment i.e. buffer size */
        u_int nbfrags;                /* nbr of fragments */
        dmach_t dma_ch;                /* DMA channel (channel2 for audio) */
        u_int dma_ok;
} audio_stream_t;

static audio_stream_t output_stream;
static audio_stream_t input_stream; /* input */

#define NEXT_BUF(_s_,_b_) { \
        (_s_)->_b_##_idx++; \
        (_s_)->_b_##_idx %= (_s_)->nbfrags; \
        (_s_)->_b_ = (_s_)->buffers + (_s_)->_b_##_idx; }


static u_int audio_rate;
static int audio_channels;
static int audio_fmt;
static u_int audio_fragsize;
static u_int audio_nbfrags;


static int audio_rd_refcount;
static int audio_wr_refcount;
#define audio_active                (audio_rd_refcount | audio_wr_refcount)

static int audio_dev_dsp;
static int audio_dev_mixer;
static int audio_mix_modcnt;

static int uda1341_volume;
static u8 uda_sampling;
static int uda1341_boost;
static int mixer_igain=0x4; /* -6db*/

static void uda1341_l3_address(u8 data)
{
        int i;
        unsigned long flags;

        local_irq_save(flags);

//        write_gpio_bit(GPIO_L3MODE, 0);
        s3c2410_gpio_setpin(S3C2410_GPB2,0);               
//        write_gpio_bit(GPIO_L3CLOCK, 1);
        s3c2410_gpio_setpin(S3C2410_GPB4,1);       
        udelay(1);
       
        for (i = 0; i < 8; i++) {
                if (data & 0x1) {
                        s3c2410_gpio_setpin(S3C2410_GPB4,0);                       
                        s3c2410_gpio_setpin(S3C2410_GPB3,1);                       
                        udelay(1);
                        s3c2410_gpio_setpin(S3C2410_GPB4,1);
                } else {
                        s3c2410_gpio_setpin(S3C2410_GPB4,0);                       
                        s3c2410_gpio_setpin(S3C2410_GPB3,0);                       
                        udelay(1);
                        s3c2410_gpio_setpin(S3C2410_GPB4,1);                       
                }
                data >>= 1;
        }

        s3c2410_gpio_setpin(S3C2410_GPB2,1);       
        s3c2410_gpio_setpin(S3C2410_GPB4,1);       
        local_irq_restore(flags);
}

static void uda1341_l3_data(u8 data)
{
        int i;
        unsigned long flags;

        local_irq_save(flags);
        udelay(1);

        for (i = 0; i < 8; i++) {
                if (data & 0x1) {
                        s3c2410_gpio_setpin(S3C2410_GPB4,0);                       
                        s3c2410_gpio_setpin(S3C2410_GPB3,1);                               
                        udelay(1);
                        s3c2410_gpio_setpin(S3C2410_GPB4,1);                               
                } else {
                        s3c2410_gpio_setpin(S3C2410_GPB4,0);                               
                        s3c2410_gpio_setpin(S3C2410_GPB3,0);                               
                        udelay(1);
                        s3c2410_gpio_setpin(S3C2410_GPB4,1);                               
                }

                data >>= 1;
        }
       
        local_irq_restore(flags);
}

static void audio_clear_buf(audio_stream_t * s)
{
            DPRINTK("audio_clear_buf\n");

        if(s->dma_ok) s3c2410_dma_ctrl(s->dma_ch, S3C2410_DMAOP_FLUSH);

        if (s->buffers) {
                int frag;

                for (frag = 0; frag < s->nbfrags; frag++) {
                        if (!s->buffers[frag].master)
                                continue;
                        dma_free_coherent(NULL,
                                        s->buffers[frag].master,
                                        s->buffers[frag].start,
                                        s->buffers[frag].dma_addr);
                }
                kfree(s->buffers);
                s->buffers = NULL;
        }

        s->buf_idx = 0;
        s->buf = NULL;
}

static int audio_setup_buf(audio_stream_t * s)
{
        int frag;
        int dmasize = 0;
        char *dmabuf = 0;
        dma_addr_t dmaphys = 0;

        if (s->buffers)
                return -EBUSY;

        s->nbfrags = audio_nbfrags;
        s->fragsize = audio_fragsize;

        s->buffers = (audio_buf_t *)
            kmalloc(sizeof(audio_buf_t) * s->nbfrags, GFP_KERNEL);
        if (!s->buffers)
                goto err;
        memset(s->buffers, 0, sizeof(audio_buf_t) * s->nbfrags);

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -