kitronix320x240x16_ssd2119_8bit.h

来自「基于TI公司Cortex-M3的uart超级通信开发」· C头文件 代码 · 共 72 行

//*****************************************************************************
//
// kitronix320x240x16_ssd2119_8bit.h - Prototypes for the Kitronix K350QVG-V1-F
//                                     display driver with an SSD2119
//                                     controller.
//
// Copyright (c) 2008-2009 Luminary Micro, Inc.  All rights reserved.
// Software License Agreement
//
// Luminary Micro, Inc. (LMI) is supplying this software for use solely and
// exclusively on LMI's microcontroller products.
//
// The software is owned by LMI and/or its suppliers, and is protected under
// applicable copyright laws.  All rights are reserved.  You may not combine
// this software with "viral" open-source software in order to form a larger
// program.  Any use in violation of the foregoing restrictions may subject
// the user to criminal sanctions under applicable laws, as well as to civil
// liability for the breach of the terms and conditions of this license.
//
// THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 5228 of the DK-LM3S9B96 Firmware Package.
//
//*****************************************************************************
#include "grlib/grlib.h"

#ifndef __KITRONIX240X320X16_S6D0154_8BIT_H__
#define __KITRONIX240X320X16_S6D0154_8BIT_H__

//*****************************************************************************
//
// Bit definitions for the LCD control registers in the SRAM/Flash daughter
// board.
//
//*****************************************************************************
#define LCD_CONTROL_NRESET    0x04
#define LCD_CONTROL_YN        0x02
#define LCD_CONTROL_XN        0x01

//*****************************************************************************
//
// EPI addresses used to access the LCD when the SRAM/Flash daughter board is
// installed.
//
//*****************************************************************************
#define LCD_COMMAND_PORT    0x6C000002
#define LCD_DATA_PORT       0x6C000003
#define LCD_CONTROL_SET_REG 0x6C000000
#define LCD_CONTROL_CLR_REG 0x6C000001

//
// Read start bit.  This is ORed with LCD_COMMAND_PORT or LCD_DATA_PORT to
// initiate a read request from the LCD controller.
//
#define LCD_READ_START      0x00000004

//*****************************************************************************
//
// Prototypes for the globals exported by this driver.
//
//*****************************************************************************
extern void Kitronix320x240x16_SSD2119Init(void);
extern const tDisplay g_sKitronix320x240x16_SSD2119;
extern void Kitronix320x240x16_SSD2119SetLCDControl(unsigned char ucMask,
                                                    unsigned char ucVal);

#endif // __KITRONIX240X320X16_S6D0154_8BIT_H__