tlv320aic23b.c

基于TI公司Cortex-M3的uart超级通信开发

//*****************************************************************************
//
// tlv320aic23b.c - Driver for the TI TLV320AIC23B DAC
//
// Copyright (c) 2009 Luminary Micro, Inc.  All rights reserved.
// Software License Agreement
// 
// Luminary Micro, Inc. (LMI) is supplying this software for use solely and
// exclusively on LMI's microcontroller products.
// 
// The software is owned by LMI and/or its suppliers, and is protected under
// applicable copyright laws.  All rights are reserved.  You may not combine
// this software with "viral" open-source software in order to form a larger
// program.  Any use in violation of the foregoing restrictions may subject
// the user to criminal sanctions under applicable laws, as well as to civil
// liability for the breach of the terms and conditions of this license.
// 
// THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
// 
// This is part of revision 5228 of the DK-LM3S9B96 Firmware Package.
//
//*****************************************************************************

#include "inc/hw_memmap.h"
#include "inc/hw_types.h"
#include "tlv320aic23b.h"
#include "driverlib/gpio.h"
#include "driverlib/i2c.h"
#include "driverlib/sysctl.h"

//*****************************************************************************
//
// The I2C pins that are used by this application.
//
//*****************************************************************************
#define DAC_I2C_PERIPH              (SYSCTL_PERIPH_I2C0)
#define DAC_I2C_MASTER_BASE         (I2C0_MASTER_BASE)
#define DAC_I2CSCL_GPIO_PERIPH      (SYSCTL_PERIPH_GPIOB)
#define DAC_I2CSCL_GPIO_PORT        (GPIO_PORTB_BASE)
#define DAC_I2CSCL_PIN              (GPIO_PIN_2)

#define DAC_I2CSDA_GPIO_PERIPH      (SYSCTL_PERIPH_GPIOB)
#define DAC_I2CSDA_GPIO_PORT        (GPIO_PORTB_BASE)
#define DAC_I2CSDA_PIN              (GPIO_PIN_3)

//*****************************************************************************
//
//  Register offsets.
//
//*****************************************************************************
#define TI_LEFT_LINEIN_VC       0x00        // Left line input channel volume
                                            // control.
#define TI_RIGHT_LINEIN_VC      0x02        // Right line input channel volume
                                            // control.
#define TI_LEFT_HP_VC           0x04        // Left channel headphone volume
                                            // control.
#define TI_RIGHT_HP_VC          0x06        // Right channel headphone volume
                                            // control.
#define TI_ANALOG_AP            0x08        // Analog audio path control.
#define TI_DIGITAL_AP           0x0a        // Digital audio path control.
#define TI_POWER_DOWN           0x0c        // Power down control.
#define TI_DIGITAL_AI           0x0e        // Digital audio interface format.
#define TI_SRC                  0x10        // Sample rate control
#define TI_DIGITAL_ACTIVATE     0x12        // Digital interface activation.
#define TI_RESET                0x1e        // Reset register


//*****************************************************************************
//
//  TI_LEFT_LINEIN_VC
//
//*****************************************************************************
#define TI_LEFT_LINEIN_VC_LRS   0x100       // Simultaneous update.
#define TI_LEFT_LINEIN_VC_LIM   0x080       // Left line input mute
#define TI_LEFT_LINEIN_VC_LIV_M 0x01f       // Left line input volume control.

//*****************************************************************************
//
//  TI_RIGHT_LINEIN_VC
//
//*****************************************************************************
#define TI_RIGHT_LINEIN_VC_RLS  0x100       // Simultaneous update.
#define TI_RIGHT_LINEIN_VC_RIM  0x080       // Right line input mute
#define TI_RIGHT_LINEIN_VC_RIV  0x01f       // Right line input volume control.

//*****************************************************************************
//
//  TI_LEFT_HP_VC
//
//*****************************************************************************
#define TI_LEFT_HP_VC_LRS       0x100           // Simultaneous update.
#define TI_LEFT_HP_VC_LZC       0x080           // Left headphone zero cross.
#define TI_LEFT_HP_VC_LHV       0x07f           // Left headphone volume.
#define TI_LEFT_HP_VC_0DB       0x079           // Left headphone volume 0db.

//*****************************************************************************
//
//  TI_RIGHT_HP_VC
//
//*****************************************************************************
#define TI_RIGHT_HP_VC_RLS      0x100           // Simultaneous update.
#define TI_RIGHT_HP_VC_RZC      0x080           // Right headphone mute
#define TI_RIGHT_HP_VC_RHV      0x07f           // Right headphone volume.
#define TI_RIGHT_HP_VC_0DB      0x079           // Right headphone volume 0db.

//*****************************************************************************
//
//  TI_ANALOG_AP
//
//*****************************************************************************
#define TI_ANALOG_AP_STA        0x1c0           // Side Tone.
#define TI_ANALOG_AP_STE        0x020           // Side Tone enable.
#define TI_ANALOG_AP_DAC        0x010           // DAC select.
#define TI_ANALOG_AP_BYP        0x008           // Bypass.
#define TI_ANALOG_AP_INSEL      0x004           // Input select for ADC.
#define TI_ANALOG_AP_MICM       0x002           // Microphone mute.
#define TI_ANALOG_AP_MICB       0x001           // Microphone boost.

//*****************************************************************************
//
//  TI_DIGITAL_AP - Digital Audio Path Control
//
//*****************************************************************************
#define TI_DIGITAL_AP_DACM      0x008           // DAC soft mute
#define TI_DIGITAL_AP_DEEMP_DIS 0x000           // De-emphasis Disabled
#define TI_DIGITAL_AP_DEEMP_32K 0x002           // De-emphasis 32 kHz
#define TI_DIGITAL_AP_DEEMP_44K 0x004           // De-emphasis 44.1 kHz
#define TI_DIGITAL_AP_DEEMP_48K 0x005           // De-emphasis 48 kHz
#define TI_DIGITAL_AP_ADCHP     0x001           // ADC high-pass filter.

//*****************************************************************************
//
//  TI_POWER_DOWN - Power Down Control
//
//*****************************************************************************
#define TI_POWER_DOWN_OFF       0x080           // Device off
#define TI_POWER_DOWN_CLK       0x040           // Clock
#define TI_POWER_DOWN_OSC       0x020           // Oscillator
#define TI_POWER_DOWN_OUT       0x010           // Outputs
#define TI_POWER_DOWN_DAC       0x008           // DAC
#define TI_POWER_DOWN_ADC       0x004           // ADC
#define TI_POWER_DOWN_MIC       0x002           // Microphone input
#define TI_POWER_DOWN_LINE      0x001           // Line input

//*****************************************************************************
//
//  TI_DIGITAL_AI - Digital Audio Interface Format
//
//*****************************************************************************
#define TI_DIGITAL_AI_SLAVE     0x000           // Master mode
#define TI_DIGITAL_AI_MASTER    0x040           // Slave mode
#define TI_DIGITAL_AI_LRSWAP    0x020           // DAC left/right swap
#define TI_DIGITAL_AI_LRP       0x010           // DAC left/right phase
#define TI_DIGITAL_AI_IWL_16    0x000           // 16 bit data.
#define TI_DIGITAL_AI_IWL_20    0x004           // 20 bit data.
#define TI_DIGITAL_AI_IWL_24    0x008           // 24 bit data.
#define TI_DIGITAL_AI_IWL_32    0x00c           // 32 bit data.
#define TI_DIGITAL_AI_FOR_RA    0x000           // MSB first, right aligned
#define TI_DIGITAL_AI_FOR_LA    0x001           // MSB first, left aligned
#define TI_DIGITAL_AI_FOR_I2S   0x002           // I2S format, MSB first,
                                                // left aligned
#define TI_DIGITAL_AI_FOR_DSP   0x003           // DSP format

//*****************************************************************************
//
// TI_SRC - Sample Rate Control
//
//*****************************************************************************
#define TI_SRC_CLKOUT_DIV2      0x080           // Clock output divider
#define TI_SRC_CLKIN_DIV2       0x040           // Clock input divider
#define TI_SRC_SR               0x03c           // Sampling rate control
#define TI_SRC_SR_48000         0x000           // 12.288MHz MCLK 48KHz Sample
                                                // Rate.
#define TI_SRC_BOSR             0x002           // Base oversampling rate
#define TI_SRC_USB              0x001           // Clock mode select.
#define TI_SRC_NORMAL           0x000           // Clock mode select.

//*****************************************************************************
//
// TI_DIGITAL_ACTIVATE - Digital Interface Activation
//
//*****************************************************************************
#define TI_DIGITAL_ACTIVATE_EN  0x001           // Activate interface

//*****************************************************************************
//
// I2C Addresses for the TI DAC.
//
//*****************************************************************************
#define TI_TLV320AIC23B_ADDR_0   0x01a
#define TI_TLV320AIC23B_ADDR_1   0x01b


//*****************************************************************************
//
// Global Volumes are needed because the device is not readable.
//
//*****************************************************************************
static unsigned char g_ucHPVolume = 100;
static unsigned char g_ucEnabled = 0;

//*****************************************************************************
//
// This is the volume control settings table to use to scale the dB settings
// to a 0-100% scale.  There are 13 entries because 100/8 scaling is 12.5 steps
// which requires 13 entries.
//
//*****************************************************************************
static const unsigned char pucVolumeTable[13] =
{
     0x00,
     0x30,
     0x38,
     0x40,
     0x48,
     0x50,
     0x58,
     0x60,
     0x64,
     0x68,
     0x70,
     0x74,
     0x79, // TI_LEFT_HP_VC_0DB,
};

//*****************************************************************************
//
// Write a register in the TLV320AIC23B DAC.
//
// \param ucRegister is the offset to the register to write.
// \param ulData is the data to be written to the DAC register.
//
// This function will write the register passed in /e ucAddr with the value
// passed in to /e ulData.  The data in \e ulData is actually 9 bits and the
// value in /e ucAddr is interpreted as 7 bits.
//
// \return Returns \b true on success or \b false on error.
//
//*****************************************************************************
static tBoolean
TLV320AIC23BWriteRegister(unsigned char ucRegister, unsigned long ulData)
{
    //
    // Set the slave address.
    //
    I2CMasterSlaveAddrSet(DAC_I2C_MASTER_BASE, TI_TLV320AIC23B_ADDR_0, false);

    //
    // Write the next byte to the controller.
    //
    I2CMasterDataPut(DAC_I2C_MASTER_BASE, ucRegister | ((ulData >> 8) & 1));