lcd.h

来自「MSP430液晶控制程序」· C头文件 代码 · 共 26 行

#define CS1  P3OUT|=0X01;
#define STD1   P3OUT|=0X02;
#define SCLK1  P3OUT|=0X04;
#define PSB1   P3OUT|=0X08;   //H=并口; L=串口;
#define RST1  P3OUT|=0X10;   //Reset Signal 低电平有效

#define CS0  P3OUT&=0XFE;
#define STD0   P3OUT&=0XFD;
#define SCLK0  P3OUT&=0XFB;
#define PSB0   P3OUT&=0XF7;   //H=并口; L=串口;
#define RST0  P3OUT&=0XEF;   //Reset Signal 低电平有效

#define x1    0x80
#define x2    0x88
#define y     0x80
#define comm  0x00
#define dat   0x01

void init_lcd (void);
void wr_lcd (unsigned int dat_comm,unsigned int content);
void chn_disp (unsigned char *chn);
void lat_disp (unsigned int data1,unsigned int data2);
void con_disp (unsigned int data1,unsigned int data2,unsigned int x0,unsigned int y0,unsigned int xl,unsigned int yl);
void clrram (void);