msp430x24x_wdt_02.s43

来自「步进电机驱动程序msp430f247单片机」· S43 代码 · 共 52 行

;*******************************************************************************
;   MSP430x24x Demo - WDT, Toggle P1.0, Interval Overflow ISR, 32kHz ACLK
;
;   Description: Toggle P1.0 using software timed by WDT ISR. Toggle rate is
;   exactly 250ms based on 32kHz ACLK WDT clock source. In this example the
;   WDT is configured to divide 32768 watch-crystal(2^15) by 2^13 with an ISR
;   triggered @ 4Hz.
;   ACLK = LFXT1 = 32768Hz, MCLK = SMCLK = default DCO ~1.045MHz
;   //* External watch crystal installed on XIN XOUT is required for ACLK *//
;
;                MSP430F249
;             -----------------
;         /|\|              XIN|-
;          | |                 | 32kHz
;          --|RST          XOUT|-
;            |                 |
;            |             P1.0|-->LED
;
;   B. Nisarga
;   Texas Instruments Inc.
;   September 2007
;   Built with IAR Embedded Workbench Version: 3.42A
;*******************************************************************************
#include "msp430x24x.h"
;-------------------------------------------------------------------------------
            RSEG    CSTACK                  ; Define stack segment
;-------------------------------------------------------------------------------
            RSEG    CODE                    ; Assemble to Flash memory
;-------------------------------------------------------------------------------
RESET       mov.w   #SFE(CSTACK),SP         ; Initialize stackpointer
SetupWDT    mov.w   #WDT_ADLY_250,&WDTCTL   ; WDT 250ms, ACLK, interval timer
            bis.b   #WDTIE,&IE1             ; Enable WDT interrupt
SetupP1     bis.b   #001h,&P1DIR            ; P1.0 output
                                            ;
Mainloop    bis.w   #LPM3+GIE,SR            ; Enter LPM3, interrupts enabled
            nop                             ; Required only for debugger
                                            ;
;-------------------------------------------------------------------------------
WDT_ISR;    Toggle P1.0
;-------------------------------------------------------------------------------
            xor.b   #001h,&P1OUT            ; Toggle P1.0
            reti                            ;
                                            ;
;-------------------------------------------------------------------------------
            COMMON  INTVEC                  ; Interrupt Vectors
;-------------------------------------------------------------------------------
            ORG     RESET_VECTOR            ; MSP430 RESET Vector
            DW      RESET                   ;
            ORG     WDT_VECTOR              ; WDT Vector
            DW      WDT_ISR                 ;
            END