pbuf.c

基于STM32F107的UDP服务器程序

    SYS_ARCH_UNPROTECT(old_level);
  }
}

/**
 * Concatenate two pbufs (each may be a pbuf chain) and take over
 * the caller's reference of the tail pbuf.
 * 
 * @note The caller MAY NOT reference the tail pbuf afterwards.
 * Use pbuf_chain() for that purpose.
 * 
 * @see pbuf_chain()
 */

void
pbuf_cat(struct pbuf *h, struct pbuf *t)
{
  struct pbuf *p;

  LWIP_ERROR("(h != NULL) && (t != NULL) (programmer violates API)",
             ((h != NULL) && (t != NULL)), return;);

  /* proceed to last pbuf of chain */
  for (p = h; p->next != NULL; p = p->next) {
    /* add total length of second chain to all totals of first chain */
    p->tot_len += t->tot_len;
  }
  /* { p is last pbuf of first h chain, p->next == NULL } */
  LWIP_ASSERT("p->tot_len == p->len (of last pbuf in chain)", p->tot_len == p->len);
  LWIP_ASSERT("p->next == NULL", p->next == NULL);
  /* add total length of second chain to last pbuf total of first chain */
  p->tot_len += t->tot_len;
  /* chain last pbuf of head (p) with first of tail (t) */
  p->next = t;
  /* p->next now references t, but the caller will drop its reference to t,
   * so netto there is no change to the reference count of t.
   */
}

/**
 * Chain two pbufs (or pbuf chains) together.
 * 
 * The caller MUST call pbuf_free(t) once it has stopped
 * using it. Use pbuf_cat() instead if you no longer use t.
 * 
 * @param h head pbuf (chain)
 * @param t tail pbuf (chain)
 * @note The pbufs MUST belong to the same packet.
 * @note MAY NOT be called on a packet queue.
 *
 * The ->tot_len fields of all pbufs of the head chain are adjusted.
 * The ->next field of the last pbuf of the head chain is adjusted.
 * The ->ref field of the first pbuf of the tail chain is adjusted.
 *
 */
void
pbuf_chain(struct pbuf *h, struct pbuf *t)
{
  pbuf_cat(h, t);
  /* t is now referenced by h */
  pbuf_ref(t);
  LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_FRESH | 2, ("pbuf_chain: %p references %p\n", (void *)h, (void *)t));
}

/**
 * Dechains the first pbuf from its succeeding pbufs in the chain.
 *
 * Makes p->tot_len field equal to p->len.
 * @param p pbuf to dechain
 * @return remainder of the pbuf chain, or NULL if it was de-allocated.
 * @note May not be called on a packet queue.
 */
struct pbuf *
pbuf_dechain(struct pbuf *p)
{
  struct pbuf *q;
  u8_t tail_gone = 1;
  /* tail */
  q = p->next;
  /* pbuf has successor in chain? */
  if (q != NULL) {
    /* assert tot_len invariant: (p->tot_len == p->len + (p->next? p->next->tot_len: 0) */
    LWIP_ASSERT("p->tot_len == p->len + q->tot_len", q->tot_len == p->tot_len - p->len);
    /* enforce invariant if assertion is disabled */
    q->tot_len = p->tot_len - p->len;
    /* decouple pbuf from remainder */
    p->next = NULL;
    /* total length of pbuf p is its own length only */
    p->tot_len = p->len;
    /* q is no longer referenced by p, free it */
    LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_STATE, ("pbuf_dechain: unreferencing %p\n", (void *)q));
    tail_gone = pbuf_free(q);
    if (tail_gone > 0) {
      LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_STATE,
                  ("pbuf_dechain: deallocated %p (as it is no longer referenced)\n", (void *)q));
    }
    /* return remaining tail or NULL if deallocated */
  }
  /* assert tot_len invariant: (p->tot_len == p->len + (p->next? p->next->tot_len: 0) */
  LWIP_ASSERT("p->tot_len == p->len", p->tot_len == p->len);
  return ((tail_gone > 0) ? NULL : q);
}

/**
 *
 * Create PBUF_RAM copies of pbufs.
 *
 * Used to queue packets on behalf of the lwIP stack, such as
 * ARP based queueing.
 *
 * @note You MUST explicitly use p = pbuf_take(p);
 *
 * @note Only one packet is copied, no packet queue!
 *
 * @param p_to pbuf destination of the copy
 * @param p_from pbuf source of the copy
 *
 * @return ERR_OK if pbuf was copied
 *         ERR_ARG if one of the pbufs is NULL or p_to is not big
 *                 enough to hold p_from
 */
err_t
pbuf_copy(struct pbuf *p_to, struct pbuf *p_from)
{
  u16_t offset_to=0, offset_from=0, len;

  LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE | 3, ("pbuf_copy(%p, %p)\n",
    (void*)p_to, (void*)p_from));

  /* is the target big enough to hold the source? */
  LWIP_ERROR("pbuf_copy: target not big enough to hold source", ((p_to != NULL) &&
             (p_from != NULL) && (p_to->tot_len >= p_from->tot_len)), return ERR_ARG;);

  /* iterate through pbuf chain */
  do
  {
    LWIP_ASSERT("p_to != NULL", p_to != NULL);
    /* copy one part of the original chain */
    if ((p_to->len - offset_to) >= (p_from->len - offset_from)) {
      /* complete current p_from fits into current p_to */
      len = p_from->len - offset_from;
    } else {
      /* current p_from does not fit into current p_to */
      len = p_to->len - offset_to;
    }
    MEMCPY((u8_t*)p_to->payload + offset_to, (u8_t*)p_from->payload + offset_from, len);
    offset_to += len;
    offset_from += len;
    LWIP_ASSERT("offset_to <= p_to->len", offset_to <= p_to->len);
    if (offset_to == p_to->len) {
      /* on to next p_to (if any) */
      offset_to = 0;
      p_to = p_to->next;
    }
    LWIP_ASSERT("offset_from <= p_from->len", offset_from <= p_from->len);
    if (offset_from >= p_from->len) {
      /* on to next p_from (if any) */
      offset_from = 0;
      p_from = p_from->next;
    }

    if((p_from != NULL) && (p_from->len == p_from->tot_len)) {
      /* don't copy more than one packet! */
      LWIP_ERROR("pbuf_copy() does not allow packet queues!\n",
                 (p_from->next == NULL), return ERR_VAL;);
    }
    if((p_to != NULL) && (p_to->len == p_to->tot_len)) {
      /* don't copy more than one packet! */
      LWIP_ERROR("pbuf_copy() does not allow packet queues!\n",
                  (p_to->next == NULL), return ERR_VAL;);
    }
  } while (p_from);
  LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE | 1, ("pbuf_copy: end of chain reached.\n"));
  return ERR_OK;
}

/**
 * Copy (part of) the contents of a packet buffer
 * to an application supplied buffer.
 *
 * @param buf the pbuf from which to copy data
 * @param dataptr the application supplied buffer
 * @param len length of data to copy (dataptr must be big enough). No more 
 * than buf->tot_len will be copied, irrespective of len
 * @param offset offset into the packet buffer from where to begin copying len bytes
 * @return the number of bytes copied, or 0 on failure
 */
u16_t
pbuf_copy_partial(struct pbuf *buf, void *dataptr, u16_t len, u16_t offset)
{
  struct pbuf *p;
  u16_t left;
  u16_t buf_copy_len;
  u16_t copied_total = 0;

  LWIP_ERROR("pbuf_copy_partial: invalid buf", (buf != NULL), return 0;);
  LWIP_ERROR("pbuf_copy_partial: invalid dataptr", (dataptr != NULL), return 0;);

  left = 0;

  if((buf == NULL) || (dataptr == NULL)) {
    return 0;
  }

  /* Note some systems use byte copy if dataptr or one of the pbuf payload pointers are unaligned. */
  for(p = buf; len != 0 && p != NULL; p = p->next) {
    if ((offset != 0) && (offset >= p->len)) {
      /* don't copy from this buffer -> on to the next */
      offset -= p->len;
    } else {
      /* copy from this buffer. maybe only partially. */
      buf_copy_len = p->len - offset;
      if (buf_copy_len > len)
          buf_copy_len = len;
      /* copy the necessary parts of the buffer */
      MEMCPY(&((char*)dataptr)[left], &((char*)p->payload)[offset], buf_copy_len);
      copied_total += buf_copy_len;
      left += buf_copy_len;
      len -= buf_copy_len;
      offset = 0;
    }
  }
  return copied_total;
}

/**
 * Copy application supplied data into a pbuf.
 * This function can only be used to copy the equivalent of buf->tot_len data.
 *
 * @param buf pbuf to fill with data
 * @param dataptr application supplied data buffer
 * @param len length of the application supplied data buffer
 *
 * @return ERR_OK if successful, ERR_MEM if the pbuf is not big enough
 */
err_t
pbuf_take(struct pbuf *buf, const void *dataptr, u16_t len)
{
  struct pbuf *p;
  u16_t buf_copy_len;
  u16_t total_copy_len = len;
  u16_t copied_total = 0;

  LWIP_ERROR("pbuf_take: invalid buf", (buf != NULL), return 0;);
  LWIP_ERROR("pbuf_take: invalid dataptr", (dataptr != NULL), return 0;);

  if ((buf == NULL) || (dataptr == NULL) || (buf->tot_len < len)) {
    return ERR_ARG;
  }

  /* Note some systems use byte copy if dataptr or one of the pbuf payload pointers are unaligned. */
  for(p = buf; total_copy_len != 0; p = p->next) {
    LWIP_ASSERT("pbuf_take: invalid pbuf", p != NULL);
    buf_copy_len = total_copy_len;
    if (buf_copy_len > p->len) {
      /* this pbuf cannot hold all remaining data */
      buf_copy_len = p->len;
    }
    /* copy the necessary parts of the buffer */
    MEMCPY(p->payload, &((char*)dataptr)[copied_total], buf_copy_len);
    total_copy_len -= buf_copy_len;
    copied_total += buf_copy_len;
  }
  LWIP_ASSERT("did not copy all data", total_copy_len == 0 && copied_total == len);
  return ERR_OK;
}

/**
 * Creates a single pbuf out of a queue of pbufs.
 *
 * @remark: The source pbuf 'p' is not freed by this function because that can
 *          be illegal in some places!
 *
 * @param p the source pbuf
 * @param layer pbuf_layer of the new pbuf
 *
 * @return a new, single pbuf (p->next is NULL)
 *         or the old pbuf if allocation fails
 */
struct pbuf*
pbuf_coalesce(struct pbuf *p, pbuf_layer layer)
{
  struct pbuf *q;
  err_t err;
  if (p->next == NULL) {
    return p;
  }
  q = pbuf_alloc(layer, p->tot_len, PBUF_RAM);
  if (q == NULL) {
    /* @todo: what do we do now? */
    return p;
  }
  err = pbuf_copy(q, p);
  LWIP_ASSERT("pbuf_copy failed", err == ERR_OK);
  pbuf_free(p);
  return q;
}