opt.h

基于STM32F107的UDP服务器程序

#define LWIP_NETIF_STATUS_CALLBACK      0
#endif

/**
 * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface
 * whenever the link changes (i.e., link down)
 */
#ifndef LWIP_NETIF_LINK_CALLBACK
#define LWIP_NETIF_LINK_CALLBACK        0
#endif

/**
 * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table
 * indices) in struct netif. TCP and UDP can make use of this to prevent
 * scanning the ARP table for every sent packet. While this is faster for big
 * ARP tables or many concurrent connections, it might be counterproductive
 * if you have a tiny ARP table or if there never are concurrent connections.
 */
#ifndef LWIP_NETIF_HWADDRHINT
#define LWIP_NETIF_HWADDRHINT           0
#endif

/**
 * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP
 * address equal to the netif IP address, looping them back up the stack.
 */
#ifndef LWIP_NETIF_LOOPBACK
#define LWIP_NETIF_LOOPBACK             0
#endif

/**
 * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback
 * sending for each netif (0 = disabled)
 */
#ifndef LWIP_LOOPBACK_MAX_PBUFS
#define LWIP_LOOPBACK_MAX_PBUFS         0
#endif

/**
 * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in
 * the system, as netifs must change how they behave depending on this setting
 * for the LWIP_NETIF_LOOPBACK option to work.
 * Setting this is needed to avoid reentering non-reentrant functions like
 * tcp_input().
 *    LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a
 *       multithreaded environment like tcpip.c. In this case, netif->input()
 *       is called directly.
 *    LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup.
 *       The packets are put on a list and netif_poll() must be called in
 *       the main application loop.
 */
#ifndef LWIP_NETIF_LOOPBACK_MULTITHREADING
#define LWIP_NETIF_LOOPBACK_MULTITHREADING    (!NO_SYS)
#endif

/**
 * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data
 * to be sent into one single pbuf. This is for compatibility with DMA-enabled
 * MACs that do not support scatter-gather.
 * Beware that this might involve CPU-memcpy before transmitting that would not
 * be needed without this flag! Use this only if you need to!
 *
 * @todo: TCP and IP-frag do not work with this, yet:
 */
#ifndef LWIP_NETIF_TX_SINGLE_PBUF
#define LWIP_NETIF_TX_SINGLE_PBUF             0
#endif /* LWIP_NETIF_TX_SINGLE_PBUF */

/*
   ------------------------------------
   ---------- LOOPIF options ----------
   ------------------------------------
*/
/**
 * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1) and loopif.c
 */
#ifndef LWIP_HAVE_LOOPIF
#define LWIP_HAVE_LOOPIF                0
#endif

/*
   ------------------------------------
   ---------- SLIPIF options ----------
   ------------------------------------
*/
/**
 * LWIP_HAVE_SLIPIF==1: Support slip interface and slipif.c
 */
#ifndef LWIP_HAVE_SLIPIF
#define LWIP_HAVE_SLIPIF                0
#endif

/*
   ------------------------------------
   ---------- Thread options ----------
   ------------------------------------
*/
/**
 * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread.
 */
#ifndef TCPIP_THREAD_NAME
#define TCPIP_THREAD_NAME              "tcpip_thread"
#endif

/**
 * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread.
 * The stack size value itself is platform-dependent, but is passed to
 * sys_thread_new() when the thread is created.
 */
#ifndef TCPIP_THREAD_STACKSIZE
#define TCPIP_THREAD_STACKSIZE          0
#endif

/**
 * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread.
 * The priority value itself is platform-dependent, but is passed to
 * sys_thread_new() when the thread is created.
 */
#ifndef TCPIP_THREAD_PRIO
#define TCPIP_THREAD_PRIO               1
#endif

/**
 * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages
 * The queue size value itself is platform-dependent, but is passed to
 * sys_mbox_new() when tcpip_init is called.
 */
#ifndef TCPIP_MBOX_SIZE
#define TCPIP_MBOX_SIZE                 0
#endif

/**
 * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread.
 */
#ifndef SLIPIF_THREAD_NAME
#define SLIPIF_THREAD_NAME             "slipif_loop"
#endif

/**
 * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread.
 * The stack size value itself is platform-dependent, but is passed to
 * sys_thread_new() when the thread is created.
 */
#ifndef SLIPIF_THREAD_STACKSIZE
#define SLIPIF_THREAD_STACKSIZE         0
#endif

/**
 * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread.
 * The priority value itself is platform-dependent, but is passed to
 * sys_thread_new() when the thread is created.
 */
#ifndef SLIPIF_THREAD_PRIO
#define SLIPIF_THREAD_PRIO              1
#endif

/**
 * PPP_THREAD_NAME: The name assigned to the pppMain thread.
 */
#ifndef PPP_THREAD_NAME
#define PPP_THREAD_NAME                "pppMain"
#endif

/**
 * PPP_THREAD_STACKSIZE: The stack size used by the pppMain thread.
 * The stack size value itself is platform-dependent, but is passed to
 * sys_thread_new() when the thread is created.
 */
#ifndef PPP_THREAD_STACKSIZE
#define PPP_THREAD_STACKSIZE            0
#endif

/**
 * PPP_THREAD_PRIO: The priority assigned to the pppMain thread.
 * The priority value itself is platform-dependent, but is passed to
 * sys_thread_new() when the thread is created.
 */
#ifndef PPP_THREAD_PRIO
#define PPP_THREAD_PRIO                 1
#endif

/**
 * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread.
 */
#ifndef DEFAULT_THREAD_NAME
#define DEFAULT_THREAD_NAME            "lwIP"
#endif

/**
 * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread.
 * The stack size value itself is platform-dependent, but is passed to
 * sys_thread_new() when the thread is created.
 */
#ifndef DEFAULT_THREAD_STACKSIZE
#define DEFAULT_THREAD_STACKSIZE        0
#endif

/**
 * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread.
 * The priority value itself is platform-dependent, but is passed to
 * sys_thread_new() when the thread is created.
 */
#ifndef DEFAULT_THREAD_PRIO
#define DEFAULT_THREAD_PRIO             1
#endif

/**
 * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
 * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed
 * to sys_mbox_new() when the recvmbox is created.
 */
#ifndef DEFAULT_RAW_RECVMBOX_SIZE
#define DEFAULT_RAW_RECVMBOX_SIZE       0
#endif

/**
 * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
 * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed
 * to sys_mbox_new() when the recvmbox is created.
 */
#ifndef DEFAULT_UDP_RECVMBOX_SIZE
#define DEFAULT_UDP_RECVMBOX_SIZE       0
#endif

/**
 * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
 * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed
 * to sys_mbox_new() when the recvmbox is created.
 */
#ifndef DEFAULT_TCP_RECVMBOX_SIZE
#define DEFAULT_TCP_RECVMBOX_SIZE       0
#endif

/**
 * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections.
 * The queue size value itself is platform-dependent, but is passed to
 * sys_mbox_new() when the acceptmbox is created.
 */
#ifndef DEFAULT_ACCEPTMBOX_SIZE
#define DEFAULT_ACCEPTMBOX_SIZE         0
#endif

/*
   ----------------------------------------------
   ---------- Sequential layer options ----------
   ----------------------------------------------
*/
/**
 * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!)
 * Don't use it if you're not an active lwIP project member
 */
#ifndef LWIP_TCPIP_CORE_LOCKING
#define LWIP_TCPIP_CORE_LOCKING         0
#endif

/**
 * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c)
 */
#ifndef LWIP_NETCONN
#define LWIP_NETCONN                    1
#endif

/*
   ------------------------------------
   ---------- Socket options ----------
   ------------------------------------
*/
/**
 * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c)
 */
#ifndef LWIP_SOCKET
#define LWIP_SOCKET                     1
#endif

/**
 * LWIP_COMPAT_SOCKETS==1: Enable BSD-style sockets functions names.
 * (only used if you use sockets.c)
 */
#ifndef LWIP_COMPAT_SOCKETS
#define LWIP_COMPAT_SOCKETS             1
#endif

/**
 * LWIP_POSIX_SOCKETS_IO_NAMES==1: Enable POSIX-style sockets functions names.
 * Disable this option if you use a POSIX operating system that uses the same
 * names (read, write & close). (only used if you use sockets.c)
 */
#ifndef LWIP_POSIX_SOCKETS_IO_NAMES
#define LWIP_POSIX_SOCKETS_IO_NAMES     1
#endif

/**
 * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT
 * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set
 * in seconds. (does not require sockets.c, and will affect tcp.c)
 */
#ifndef LWIP_TCP_KEEPALIVE
#define LWIP_TCP_KEEPALIVE              0
#endif

/**
 * LWIP_SO_RCVTIMEO==1: Enable SO_RCVTIMEO processing.
 */
#ifndef LWIP_SO_RCVTIMEO
#define LWIP_SO_RCVTIMEO                0
#endif

/**
 * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing.
 */
#ifndef LWIP_SO_RCVBUF
#define LWIP_SO_RCVBUF                  0
#endif

/**
 * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize.
 */
#ifndef RECV_BUFSIZE_DEFAULT
#define RECV_BUFSIZE_DEFAULT            INT_MAX
#endif

/**
 * SO_REUSE==1: Enable SO_REUSEADDR and SO_REUSEPORT options. DO NOT USE!
 */
#ifndef SO_REUSE
#define SO_REUSE                        0
#endif

/*
   ----------------------------------------
   ---------- Statistics options ----------
   ----------------------------------------
*/
/**
 * LWIP_STATS==1: Enable statistics collection in lwip_stats.
 */
#ifndef LWIP_STATS
#define LWIP_STATS                      1
#endif

#if LWIP_STATS

/**
 * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions.
 */
#ifndef LWIP_STATS_DISPLAY
#define LWIP_STATS_DISPLAY              0
#endif

/**
 * LINK_STATS==1: Enable link stats.
 */
#ifndef LINK_STATS
#define LINK_STATS                      1
#endif

/**
 * ETHARP_STATS==1: Enable etharp stats.
 */
#ifndef ETHARP_STATS
#define ETHARP_STATS                    (LWIP_ARP)
#endif

/**
 * IP_STATS==1: Enable IP stats.
 */
#ifndef IP_STATS
#define IP_STATS                        1
#endif

/**
 * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is
 * on if using either frag or reass.
 */
#ifndef IPFRAG_STATS
#define IPFRAG_STATS                    (IP_REASSEMBLY || IP_FRAG)
#endif

/**
 * ICMP_STATS==1: Enable ICMP stats.
 */
#ifndef ICMP_STATS
#define ICMP_STATS                      1
#endif

/**
 * IGMP_STATS==1: Enable IGMP stats.
 */
#ifndef IGMP_STATS
#define IGMP_STATS                      (LWIP_IGMP)
#endif

/**
 * UDP_STATS==1: Enable UDP stats. Default is on if
 * UDP enabled, otherwise off.
 */
#ifndef UDP_STATS
#define UDP_STATS                       (LWIP_UDP)
#endif

/**
 * TCP_STATS==1: Enable TCP stats. Default is on if TCP
 * enabled, otherwise off.
 */
#ifndef TCP_STATS
#define TCP_STATS                       (LWIP_TCP)
#endif

/**
 * MEM_STATS==1: Enable mem.c stats.
 */
#ifndef MEM_STATS
#define MEM_STATS                       1
#endif

/**
 * MEMP_STATS==1: Enable memp.c pool stats.
 */
#ifndef MEMP_STATS
#define MEMP_STATS                      1
#endif

/**
 * SYS_STATS==1: Enable system stats (sem and mbox counts, etc).
 */
#ifndef SYS_STATS
#define SYS_STATS                       1
#endif

#else

#define LINK_STATS                      0
#define IP_STATS                        0
#define IPFRAG_STATS                    0
#define ICMP_STATS                      0
#define IGMP_STATS                      0
#define UDP_STATS                       0
#define TCP_STATS                       0
#define MEM_STATS                       0
#define MEMP_STATS                      0
#define SYS_STATS                       0
#define LWIP_STATS_DISPLAY              0

#endif /* LWIP_STATS */

/*
   ---------------------------------
   ---------- PPP options ----------
   ---------------------------------
*/
/**
 * PPP_SUPPORT==1: Enable PPP.
 */
#ifndef PPP_SUPPORT
#define PPP_SUPPORT                     0
#endif