lwipopts.old

NXPl788上lwip的无操作系统移植,基于Embest开发板

/*
 * Copyright (c) 2001-2003 Swedish Institute of Computer Science.
 * All rights reserved. 
 * 
 * Redistribution and use in source and binary forms, with or without modification, 
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission. 
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
 * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
 * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
 * OF SUCH DAMAGE.
 *
 * This file is part of the lwIP TCP/IP stack.
 * 
 * Author: Adam Dunkels <[e-mail]>
 *
 */
#ifndef __LWIPOPTS_H__
#define __LWIPOPTS_H__

/* <sys/time.h> is included in cc.h! */
#define LWIP_TIMEVAL_PRIVATE 0

#define NO_SYS 1
/* #define LWIP_EVENT_API 1 */

/* ---------- Memory options ---------- */
/* MEM_ALIGNMENT: should be set to the alignment of the CPU for which
   lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2
   byte alignment -> define MEM_ALIGNMENT to 2. */
#define MEM_ALIGNMENT           2

/* MEM_SIZE: the size of the heap memory. If the application will send
a lot of data that needs to be copied, this should be set high. */
#define MEM_SIZE                16000

/* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application
   sends a lot of data out of ROM (or other static memory), this
   should be set high. */
#define MEMP_NUM_PBUF           30
/* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
   per active UDP "connection". */
#define MEMP_NUM_UDP_PCB        4
/* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP
   connections. */
#define MEMP_NUM_TCP_PCB        2
/* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP
   connections. */
#define MEMP_NUM_TCP_PCB_LISTEN 8
/* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP
   segments. */
#define MEMP_NUM_TCP_SEG        16

/* The following four are used only with the sequential API and can be
   set to 0 if the application only will use the raw API. */
/* MEMP_NUM_NETBUF: the number of struct netbufs. */
#define MEMP_NUM_NETBUF         0
/* MEMP_NUM_NETCONN: the number of struct netconns. */
#define MEMP_NUM_NETCONN        0
/* MEMP_NUM_TCPIP_MSG: the number of struct tcpip_msg, which is used
   for sequential API communication and incoming packets. Used in
   src/api/tcpip.c. */
#define MEMP_NUM_TCPIP_MSG_API   0
#define MEMP_NUM_TCPIP_MSG_INPKT 0
/* MEMP_NUM_SYS_TIMEOUT: the number of simultaneously active
   timeouts. */
#define MEMP_NUM_SYS_TIMEOUT    0

/* ---------- Pbuf options ---------- */
/* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */
#define PBUF_POOL_SIZE          46

/* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */
#define PBUF_POOL_BUFSIZE       128

/* PBUF_LINK_HLEN: the number of bytes that should be allocated for a
   link level header. */
#define PBUF_LINK_HLEN          16

/* ---------- TCP options ---------- */
#define LWIP_TCP                1
#define TCP_TTL                 255

/* Controls if TCP should queue segments that arrive out of
   order. Define to 0 if your device is low on memory. */
#define TCP_QUEUE_OOSEQ         0

/* TCP Maximum segment size. */
#define TCP_MSS                 128

/* TCP sender buffer space (bytes). */
#define TCP_SND_BUF             256

/* TCP sender buffer space (pbufs). This must be at least = 2 *
   TCP_SND_BUF/TCP_MSS for things to work. */
#define TCP_SND_QUEUELEN        4 * TCP_SND_BUF/TCP_MSS

/* TCP receive window. */
#define TCP_WND                 512

/* Maximum number of retransmissions of data segments. */
#define TCP_MAXRTX              12

/* Maximum number of retransmissions of SYN segments. */
#define TCP_SYNMAXRTX           4

/* ---------- ARP options ---------- */
#define LWIP_ARP 1
#define ARP_TABLE_SIZE 10
#define ARP_QUEUEING 0

/* ---------- IP options ---------- */
/* Define IP_FORWARD to 1 if you wish to have the ability to forward
   IP packets across network interfaces. If you are going to run lwIP
   on a device with only one network interface, define this to 0. */
#define IP_FORWARD              0

/* If defined to 1, IP options are allowed (but ignored). If
   defined to 0, all packets with IP options are dropped. */
#define IP_OPTIONS              1

#define IP_REASSEMBLY           1
#define IP_FRAG                 1

/* ---------- ICMP options ---------- */
#define ICMP_TTL                255


/* ---------- DHCP options ---------- */
/* Define LWIP_DHCP to 1 if you want DHCP configuration of
   interfaces. DHCP is not implemented in lwIP 0.5.1, however, so
   turning this on does currently not work. */
#define LWIP_DHCP               0

/* 1 if you want to do an ARP check on the offered address
   (recommended). */
#define DHCP_DOES_ARP_CHECK     1

/* ---------- SNMP options ---------- */
/** @todo SNMP isn't functional yet. 
    @note UDP must be available for SNMP transport */

#define LWIP_SNMP               1
#define SNMP_TRAP_DESTINATIONS  1
#define SNMP_PRIVATE_MIB        1

/* ---------- UDP options ---------- */
#define LWIP_UDP                1
#define UDP_TTL                 255

#define LWIP_RAW                0

/* ---------- Statistics options ---------- */
#define LWIP_STATS 0

#if LWIP_STATS
#define LINK_STATS 0
#define IP_STATS 0
#define ICMP_STATS 0
#define UDP_STATS 0
#define TCP_STATS 0
#define MEM_STATS 1
#define MEMP_STATS 1
#define PBUF_STATS 1
#define SYS_STATS 0

#endif /* LWIP_STATS */

/** print only debug messages with this level or higher */
#define LWIP_DBG_MIN_LEVEL 0

#if 0
/** compiletime debug output selection */
#define LWIP_DBG_TYPES_ON (LWIP_DBG_ON | LWIP_DBG_TRACE | LWIP_DBG_STATE | LWIP_DBG_FRESH)
#else
/** runtime debug output selection
    debug_flags exported from main.c()*/
extern unsigned char debug_flags;
#define LWIP_DBG_TYPES_ON debug_flags
#endif

/**
 * Enable/disable debugging per module
 */
#define DEMO_DEBUG       LWIP_DBG_OFF
#define ETHARP_DEBUG     LWIP_DBG_OFF
#define NETIF_DEBUG      LWIP_DBG_OFF
#define PBUF_DEBUG       LWIP_DBG_OFF
#define DELIF_DEBUG      LWIP_DBG_OFF
#define DROPIF_DEBUG     LWIP_DBG_OFF
#define TUNIF_DEBUG      LWIP_DBG_OFF
#define UNIXIF_DEBUG     LWIP_DBG_OFF
#define TAPIF_DEBUG      LWIP_DBG_OFF
#define SIO_FIFO_DEBUG   LWIP_DBG_OFF
#define PPP_DEBUG        LWIP_DBG_OFF
#define API_LIB_DEBUG    LWIP_DBG_OFF
#define API_MSG_DEBUG    LWIP_DBG_OFF
#define SOCKETS_DEBUG    LWIP_DBG_OFF
#define ICMP_DEBUG       LWIP_DBG_OFF
#define INET_DEBUG       LWIP_DBG_OFF
#define IP_DEBUG         LWIP_DBG_OFF
#define IP_REASS_DEBUG   LWIP_DBG_OFF
#define MEM_DEBUG        LWIP_DBG_OFF
#define MEMP_DEBUG       LWIP_DBG_OFF
#define SYS_DEBUG        LWIP_DBG_OFF
#define TCP_DEBUG        LWIP_DBG_OFF
#define TCP_INPUT_DEBUG  LWIP_DBG_OFF
#define TCP_FR_DEBUG     LWIP_DBG_OFF
#define TCP_RTO_DEBUG    LWIP_DBG_OFF
#define TCP_CWND_DEBUG   LWIP_DBG_OFF
#define TCP_WND_DEBUG    LWIP_DBG_OFF
#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF
#define TCP_RST_DEBUG    LWIP_DBG_OFF
#define TCP_QLEN_DEBUG   LWIP_DBG_OFF
#define UDP_DEBUG        LWIP_DBG_OFF
#define TCPIP_DEBUG      LWIP_DBG_OFF
#define TCPDUMP_DEBUG    LWIP_DBG_OFF
#define DHCP_DEBUG       LWIP_DBG_OFF
#define SNMP_MSG_DEBUG   LWIP_DBG_ON
#define SNMP_MIB_DEBUG   LWIP_DBG_ON


#endif /* __LWIPOPTS_H__ */