udpecho.c

NXPl788上lwip的无操作系统移植,基于Embest开发板

//==========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//==========================================================================

/*
 * Copyright (c) 2001, Swedish Institute of Computer Science.
 * All rights reserved. 
 *
 * Redistribution and use in source and binary forms, with or without 
 * modification, are permitted provided that the following conditions 
 * are met: 
 * 1. Redistributions of source code must retain the above copyright 
 *    notice, this list of conditions and the following disclaimer. 
 * 2. Redistributions in binary form must reproduce the above copyright 
 *    notice, this list of conditions and the following disclaimer in the 
 *    documentation and/or other materials provided with the distribution. 
 * 3. Neither the name of the Institute nor the names of its contributors 
 *    may be used to endorse or promote products derived from this software 
 *    without specific prior written permission. 
 *
 * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND 
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE 
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
 * SUCH DAMAGE. 
 *
 * This file is part of the lwIP TCP/IP stack.
 * 
 * Author: Adam Dunkels <[e-mail]>
 *
 */

#include "lwip/api.h"
#include "lwip/sys.h"

/*-----------------------------------------------------------------------------------*/
char buffer[100];
void 
udpecho_thread(void *arg)
{
  struct netconn *conn;
  struct netbuf *buf;
  struct ip_addr *addr;
  unsigned short port;
  
  conn = netconn_new(NETCONN_UDP);
  netconn_bind(conn, NULL, 7);

  while(1) {
    buf = netconn_recv(conn);
    addr = netbuf_fromaddr(buf);
    port = netbuf_fromport(buf);
    netconn_connect(conn, addr, port);
    netconn_send(conn, buf);
    netbuf_copy(buf, buffer, sizeof(buffer));
    netbuf_delete(buf);
  }
}
/*-----------------------------------------------------------------------------------*/
void tmain(cyg_addrword_t p)
{
  lwip_init();	
  sys_thread_new("udp_echo", udpecho_thread, (void*)"udpecho", DEFAULT_THREAD_STACKSIZE, 7);
}

#define STACK_SIZE 0x1000
static char stack[STACK_SIZE];
static cyg_thread thread_data;
static cyg_handle_t thread_handle;

void
cyg_user_start(void)
{
    // Create a main thread, so we can run the scheduler and have time 'pass'
    cyg_thread_create(10,                // Priority - just a number
                      tmain,          // entry
                      0,                 // entry parameter
                      "UDP echo test",        // Name
                      &stack[0],         // Stack
                      STACK_SIZE,        // Size
                      &thread_handle,    // Handle
                      &thread_data       // Thread data structure
            );
    cyg_thread_resume(thread_handle);  // Start it
}