⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 pbuf.c

📁 NXPl788上lwip的无操作系统移植,基于Embest开发板
💻 C
📖 第 1 页 / 共 3 页
字号:
/**
 * @file
 * Packet buffer management
 *
 * Packets are built from the pbuf data structure. It supports dynamic
 * memory allocation for packet contents or can reference externally
 * managed packet contents both in RAM and ROM. Quick allocation for
 * incoming packets is provided through pools with fixed sized pbufs.
 *
 * A packet may span over multiple pbufs, chained as a singly linked
 * list. This is called a "pbuf chain".
 *
 * Multiple packets may be queued, also using this singly linked list.
 * This is called a "packet queue".
 * 
 * So, a packet queue consists of one or more pbuf chains, each of
 * which consist of one or more pbufs. CURRENTLY, PACKET QUEUES ARE
 * NOT SUPPORTED!!! Use helper structs to queue multiple packets.
 * 
 * The differences between a pbuf chain and a packet queue are very
 * precise but subtle. 
 *
 * The last pbuf of a packet has a ->tot_len field that equals the
 * ->len field. It can be found by traversing the list. If the last
 * pbuf of a packet has a ->next field other than NULL, more packets
 * are on the queue.
 *
 * Therefore, looping through a pbuf of a single packet, has an
 * loop end condition (tot_len == p->len), NOT (next == NULL).
 */

/*
 * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
 * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
 * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
 * OF SUCH DAMAGE.
 *
 * This file is part of the lwIP TCP/IP stack.
 *
 * Author: Adam Dunkels <adam@sics.se>
 *
 */

#include "lwip/opt.h"

#include "lwip/stats.h"
#include "lwip/def.h"
#include "lwip/mem.h"
#include "lwip/memp.h"
#include "lwip/pbuf.h"
#include "lwip/sys.h"
#include "arch/perf.h"
#if TCP_QUEUE_OOSEQ
#include "lwip/tcp_impl.h"
#endif
#if LWIP_CHECKSUM_ON_COPY
#include "lwip/inet_chksum.h"
#endif

#include <string.h>

#define SIZEOF_STRUCT_PBUF        LWIP_MEM_ALIGN_SIZE(sizeof(struct pbuf))
/* Since the pool is created in memp, PBUF_POOL_BUFSIZE will be automatically
   aligned there. Therefore, PBUF_POOL_BUFSIZE_ALIGNED can be used here. */
#define PBUF_POOL_BUFSIZE_ALIGNED LWIP_MEM_ALIGN_SIZE(PBUF_POOL_BUFSIZE)

#if !LWIP_TCP || !TCP_QUEUE_OOSEQ || NO_SYS
#define PBUF_POOL_IS_EMPTY()
#else /* !LWIP_TCP || !TCP_QUEUE_OOSEQ || NO_SYS */
/** Define this to 0 to prevent freeing ooseq pbufs when the PBUF_POOL is empty */
#ifndef PBUF_POOL_FREE_OOSEQ
#define PBUF_POOL_FREE_OOSEQ 1
#endif /* PBUF_POOL_FREE_OOSEQ */

#if PBUF_POOL_FREE_OOSEQ
#include "lwip/tcpip.h"
#define PBUF_POOL_IS_EMPTY() pbuf_pool_is_empty()
static u8_t pbuf_free_ooseq_queued;
/**
 * Attempt to reclaim some memory from queued out-of-sequence TCP segments
 * if we run out of pool pbufs. It's better to give priority to new packets
 * if we're running out.
 *
 * This must be done in the correct thread context therefore this function
 * can only be used with NO_SYS=0 and through tcpip_callback.
 */
static void
pbuf_free_ooseq(void* arg)
{
  struct tcp_pcb* pcb;
  SYS_ARCH_DECL_PROTECT(old_level);
  LWIP_UNUSED_ARG(arg);

  SYS_ARCH_PROTECT(old_level);
  pbuf_free_ooseq_queued = 0;
  SYS_ARCH_UNPROTECT(old_level);

  for (pcb = tcp_active_pcbs; NULL != pcb; pcb = pcb->next) {
    if (NULL != pcb->ooseq) {
      /** Free the ooseq pbufs of one PCB only */
      LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_free_ooseq: freeing out-of-sequence pbufs\n"));
      tcp_segs_free(pcb->ooseq);
      pcb->ooseq = NULL;
      return;
    }
  }
}

/** Queue a call to pbuf_free_ooseq if not already queued. */
static void
pbuf_pool_is_empty(void)
{
  u8_t queued;
  SYS_ARCH_DECL_PROTECT(old_level);

  SYS_ARCH_PROTECT(old_level);
  queued = pbuf_free_ooseq_queued;
  pbuf_free_ooseq_queued = 1;
  SYS_ARCH_UNPROTECT(old_level);

  if(!queued) {
    /* queue a call to pbuf_free_ooseq if not already queued */
    if(tcpip_callback_with_block(pbuf_free_ooseq, NULL, 0) != ERR_OK) {
      SYS_ARCH_PROTECT(old_level);
      pbuf_free_ooseq_queued = 0;
      SYS_ARCH_UNPROTECT(old_level);
    }
  }
}
#endif /* PBUF_POOL_FREE_OOSEQ */
#endif /* !LWIP_TCP || !TCP_QUEUE_OOSEQ || NO_SYS */

/**
 * Allocates a pbuf of the given type (possibly a chain for PBUF_POOL type).
 *
 * The actual memory allocated for the pbuf is determined by the
 * layer at which the pbuf is allocated and the requested size
 * (from the size parameter).
 *
 * @param layer flag to define header size
 * @param length size of the pbuf's payload
 * @param type this parameter decides how and where the pbuf
 * should be allocated as follows:
 *
 * - PBUF_RAM: buffer memory for pbuf is allocated as one large
 *             chunk. This includes protocol headers as well.
 * - PBUF_ROM: no buffer memory is allocated for the pbuf, even for
 *             protocol headers. Additional headers must be prepended
 *             by allocating another pbuf and chain in to the front of
 *             the ROM pbuf. It is assumed that the memory used is really
 *             similar to ROM in that it is immutable and will not be
 *             changed. Memory which is dynamic should generally not
 *             be attached to PBUF_ROM pbufs. Use PBUF_REF instead.
 * - PBUF_REF: no buffer memory is allocated for the pbuf, even for
 *             protocol headers. It is assumed that the pbuf is only
 *             being used in a single thread. If the pbuf gets queued,
 *             then pbuf_take should be called to copy the buffer.
 * - PBUF_POOL: the pbuf is allocated as a pbuf chain, with pbufs from
 *              the pbuf pool that is allocated during pbuf_init().
 *
 * @return the allocated pbuf. If multiple pbufs where allocated, this
 * is the first pbuf of a pbuf chain.
 */
struct pbuf *
pbuf_alloc(pbuf_layer layer, u16_t length, pbuf_type type)
{
  struct pbuf *p, *q, *r;
  u16_t offset;
  s32_t rem_len; /* remaining length */
  LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloc(length=%"U16_F")\n", length));

  /* determine header offset */
  offset = 0;
  switch (layer) {
  case PBUF_TRANSPORT:
    /* add room for transport (often TCP) layer header */
    offset += PBUF_TRANSPORT_HLEN;
    /* FALLTHROUGH */
  case PBUF_IP:
    /* add room for IP layer header */
    offset += PBUF_IP_HLEN;
    /* FALLTHROUGH */
  case PBUF_LINK:
    /* add room for link layer header */
    offset += PBUF_LINK_HLEN;
    break;
  case PBUF_RAW:
    break;
  default:
    LWIP_ASSERT("pbuf_alloc: bad pbuf layer", 0);
    return NULL;
  }

  switch (type) {
  case PBUF_POOL:
    /* allocate head of pbuf chain into p */
    p = (struct pbuf *)memp_malloc(MEMP_PBUF_POOL);
    LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloc: allocated pbuf %p\n", (void *)p));
    if (p == NULL) {
      PBUF_POOL_IS_EMPTY();
      return NULL;
    }
    p->type = type;
    p->next = NULL;

    /* make the payload pointer point 'offset' bytes into pbuf data memory */
    p->payload = LWIP_MEM_ALIGN((void *)((u8_t *)p + (SIZEOF_STRUCT_PBUF + offset)));
    LWIP_ASSERT("pbuf_alloc: pbuf p->payload properly aligned",
            ((mem_ptr_t)p->payload % MEM_ALIGNMENT) == 0);
    /* the total length of the pbuf chain is the requested size */
    p->tot_len = length;
    /* set the length of the first pbuf in the chain */
    p->len = LWIP_MIN(length, PBUF_POOL_BUFSIZE_ALIGNED - LWIP_MEM_ALIGN_SIZE(offset));
    LWIP_ASSERT("check p->payload + p->len does not overflow pbuf",
                ((u8_t*)p->payload + p->len <=
                 (u8_t*)p + SIZEOF_STRUCT_PBUF + PBUF_POOL_BUFSIZE_ALIGNED));
    LWIP_ASSERT("PBUF_POOL_BUFSIZE must be bigger than MEM_ALIGNMENT",
      (PBUF_POOL_BUFSIZE_ALIGNED - LWIP_MEM_ALIGN_SIZE(offset)) > 0 );
    /* set reference count (needed here in case we fail) */
    p->ref = 1;

    /* now allocate the tail of the pbuf chain */

    /* remember first pbuf for linkage in next iteration */
    r = p;
    /* remaining length to be allocated */
    rem_len = length - p->len;
    /* any remaining pbufs to be allocated? */
    while (rem_len > 0) {
      q = (struct pbuf *)memp_malloc(MEMP_PBUF_POOL);
      if (q == NULL) {
        PBUF_POOL_IS_EMPTY();
        /* free chain so far allocated */
        pbuf_free(p);
        /* bail out unsuccesfully */
        return NULL;
      }
      q->type = type;
      q->flags = 0;
      q->next = NULL;
      /* make previous pbuf point to this pbuf */
      r->next = q;
      /* set total length of this pbuf and next in chain */
      LWIP_ASSERT("rem_len < max_u16_t", rem_len < 0xffff);
      q->tot_len = (u16_t)rem_len;
      /* this pbuf length is pool size, unless smaller sized tail */
      q->len = LWIP_MIN((u16_t)rem_len, PBUF_POOL_BUFSIZE_ALIGNED);
      q->payload = (void *)((u8_t *)q + SIZEOF_STRUCT_PBUF);
      LWIP_ASSERT("pbuf_alloc: pbuf q->payload properly aligned",
              ((mem_ptr_t)q->payload % MEM_ALIGNMENT) == 0);
      LWIP_ASSERT("check p->payload + p->len does not overflow pbuf",
                  ((u8_t*)p->payload + p->len <=
                   (u8_t*)p + SIZEOF_STRUCT_PBUF + PBUF_POOL_BUFSIZE_ALIGNED));
      q->ref = 1;
      /* calculate remaining length to be allocated */
      rem_len -= q->len;
      /* remember this pbuf for linkage in next iteration */
      r = q;
    }
    /* end of chain */
    /*r->next = NULL;*/

    break;
  case PBUF_RAM:
    /* If pbuf is to be allocated in RAM, allocate memory for it. */
    p = (struct pbuf*)mem_malloc(LWIP_MEM_ALIGN_SIZE(SIZEOF_STRUCT_PBUF + offset) + LWIP_MEM_ALIGN_SIZE(length));
    if (p == NULL) {
      return NULL;
    }
    /* Set up internal structure of the pbuf. */
    p->payload = LWIP_MEM_ALIGN((void *)((u8_t *)p + SIZEOF_STRUCT_PBUF + offset));
    p->len = p->tot_len = length;
    p->next = NULL;
    p->type = type;

    LWIP_ASSERT("pbuf_alloc: pbuf->payload properly aligned",
           ((mem_ptr_t)p->payload % MEM_ALIGNMENT) == 0);
    break;
  /* pbuf references existing (non-volatile static constant) ROM payload? */
  case PBUF_ROM:
  /* pbuf references existing (externally allocated) RAM payload? */
  case PBUF_REF:
    /* only allocate memory for the pbuf structure */
    p = (struct pbuf *)memp_malloc(MEMP_PBUF);
    if (p == NULL) {
      LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_LEVEL_SERIOUS,
                  ("pbuf_alloc: Could not allocate MEMP_PBUF for PBUF_%s.\n",
                  (type == PBUF_ROM) ? "ROM" : "REF"));
      return NULL;
    }
    /* caller must set this field properly, afterwards */
    p->payload = NULL;
    p->len = p->tot_len = length;
    p->next = NULL;
    p->type = type;
    break;
  default:
    LWIP_ASSERT("pbuf_alloc: erroneous type", 0);
    return NULL;
  }
  /* set reference count */
  p->ref = 1;
  /* set flags */
  p->flags = 0;
  LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloc(length=%"U16_F") == %p\n", length, (void *)p));
  return p;
}

#if LWIP_SUPPORT_CUSTOM_PBUF
/** Initialize a custom pbuf (already allocated).
 *
 * @param layer flag to define header size
 * @param length size of the pbuf's payload
 * @param type type of the pbuf (only used to treat the pbuf accordingly, as
 *        this function allocates no memory)
 * @param p pointer to the custom pbuf to initialize (already allocated)
 * @param payload_mem pointer to the buffer that is used for payload and headers,
 *        must be at least big enough to hold 'length' plus the header size,
 *        may be NULL if set later
 * @param payload_mem_len the size of the 'payload_mem' buffer, must be at least
 *        big enough to hold 'length' plus the header size
 */
struct pbuf*
pbuf_alloced_custom(pbuf_layer l, u16_t length, pbuf_type type, struct pbuf_custom *p,
                    void *payload_mem, u16_t payload_mem_len)
{
  u16_t offset;
  LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_TRACE, ("pbuf_alloced_custom(length=%"U16_F")\n", length));

  /* determine header offset */
  offset = 0;
  switch (l) {
  case PBUF_TRANSPORT:
    /* add room for transport (often TCP) layer header */
    offset += PBUF_TRANSPORT_HLEN;
    /* FALLTHROUGH */
  case PBUF_IP:
    /* add room for IP layer header */
    offset += PBUF_IP_HLEN;
    /* FALLTHROUGH */
  case PBUF_LINK:
    /* add room for link layer header */
    offset += PBUF_LINK_HLEN;
    break;
  case PBUF_RAW:
    break;
  default:
    LWIP_ASSERT("pbuf_alloced_custom: bad pbuf layer", 0);
    return NULL;
  }

  if (LWIP_MEM_ALIGN_SIZE(offset) + length < payload_mem_len) {
    LWIP_DEBUGF(PBUF_DEBUG | LWIP_DBG_LEVEL_WARNING, ("pbuf_alloced_custom(length=%"U16_F") buffer too short\n", length));
    return NULL;
  }

  p->pbuf.next = NULL;
  if (payload_mem != NULL) {
//    p->pbuf.payload = LWIP_MEM_ALIGN((void *)((u8_t *)payload_mem + offset));
    p->pbuf.payload = (void *)((u8_t *)payload_mem + offset);
  } else {
    p->pbuf.payload = NULL;
  }
  p->pbuf.flags = PBUF_FLAG_IS_CUSTOM;
  p->pbuf.len = p->pbuf.tot_len = length;
  p->pbuf.type = type;

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -