📄 autoip.c
字号:
/**
* @file
* AutoIP Automatic LinkLocal IP Configuration
*
*/
/*
*
* Copyright (c) 2007 Dominik Spies <kontakt@dspies.de>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* Author: Dominik Spies <kontakt@dspies.de>
*
* This is a AutoIP implementation for the lwIP TCP/IP stack. It aims to conform
* with RFC 3927.
*
*
* Please coordinate changes and requests with Dominik Spies
* <kontakt@dspies.de>
*/
/*******************************************************************************
* USAGE:
*
* define LWIP_AUTOIP 1 in your lwipopts.h
*
* If you don't use tcpip.c (so, don't call, you don't call tcpip_init):
* - First, call autoip_init().
* - call autoip_tmr() all AUTOIP_TMR_INTERVAL msces,
* that should be defined in autoip.h.
* I recommend a value of 100. The value must divide 1000 with a remainder almost 0.
* Possible values are 1000, 500, 333, 250, 200, 166, 142, 125, 111, 100 ....
*
* Without DHCP:
* - Call autoip_start() after netif_add().
*
* With DHCP:
* - define LWIP_DHCP_AUTOIP_COOP 1 in your lwipopts.h.
* - Configure your DHCP Client.
*
*/
#include "lwip/opt.h"
#if LWIP_AUTOIP /* don't build if not configured for use in lwipopts.h */
#include "lwip/mem.h"
#include "lwip/udp.h"
#include "lwip/ip_addr.h"
#include "lwip/netif.h"
#include "lwip/autoip.h"
#include "netif/etharp.h"
#include <stdlib.h>
#include <string.h>
/* 169.254.0.0 */
#define AUTOIP_NET 0xA9FE0000
/* 169.254.1.0 */
#define AUTOIP_RANGE_START (AUTOIP_NET | 0x0100)
/* 169.254.254.255 */
#define AUTOIP_RANGE_END (AUTOIP_NET | 0xFEFF)
/** Pseudo random macro based on netif informations.
* You could use "rand()" from the C Library if you define LWIP_AUTOIP_RAND in lwipopts.h */
#ifndef LWIP_AUTOIP_RAND
#define LWIP_AUTOIP_RAND(netif) ( (((u32_t)((netif->hwaddr[5]) & 0xff) << 24) | \
((u32_t)((netif->hwaddr[3]) & 0xff) << 16) | \
((u32_t)((netif->hwaddr[2]) & 0xff) << 8) | \
((u32_t)((netif->hwaddr[4]) & 0xff))) + \
(netif->autoip?netif->autoip->tried_llipaddr:0))
#endif /* LWIP_AUTOIP_RAND */
/**
* Macro that generates the initial IP address to be tried by AUTOIP.
* If you want to override this, define it to something else in lwipopts.h.
*/
#ifndef LWIP_AUTOIP_CREATE_SEED_ADDR
#define LWIP_AUTOIP_CREATE_SEED_ADDR(netif) \
htonl(AUTOIP_RANGE_START + ((u32_t)(((u8_t)(netif->hwaddr[4])) | \
((u32_t)((u8_t)(netif->hwaddr[5]))) << 8)))
#endif /* LWIP_AUTOIP_CREATE_SEED_ADDR */
/* static functions */
static void autoip_handle_arp_conflict(struct netif *netif);
/* creates a pseudo random LL IP-Address for a network interface */
static void autoip_create_addr(struct netif *netif, ip_addr_t *ipaddr);
/* sends an ARP probe */
static err_t autoip_arp_probe(struct netif *netif);
/* sends an ARP announce */
static err_t autoip_arp_announce(struct netif *netif);
/* configure interface for use with current LL IP-Address */
static err_t autoip_bind(struct netif *netif);
/* start sending probes for llipaddr */
static void autoip_start_probing(struct netif *netif);
/**
* Initialize this module
*/
void
autoip_init(void)
{
LWIP_DEBUGF(AUTOIP_DEBUG | LWIP_DBG_TRACE, ("autoip_init()\n"));
}
/** Set a statically allocated struct autoip to work with.
* Using this prevents autoip_start to allocate it using mem_malloc.
*
* @param netif the netif for which to set the struct autoip
* @param dhcp (uninitialised) dhcp struct allocated by the application
*/
void
autoip_set_struct(struct netif *netif, struct autoip *autoip)
{
LWIP_ASSERT("netif != NULL", netif != NULL);
LWIP_ASSERT("autoip != NULL", autoip != NULL);
LWIP_ASSERT("netif already has a struct autoip set", netif->autoip == NULL);
/* clear data structure */
memset(autoip, 0, sizeof(struct autoip));
/* autoip->state = AUTOIP_STATE_OFF; */
netif->autoip = autoip;
}
/** Restart AutoIP client and check the next address (conflict detected)
*
* @param netif The netif under AutoIP control
*/
static void
autoip_restart(struct netif *netif)
{
netif->autoip->tried_llipaddr++;
autoip_start(netif);
}
/**
* Handle a IP address conflict after an ARP conflict detection
*/
static void
autoip_handle_arp_conflict(struct netif *netif)
{
/* Somehow detect if we are defending or retreating */
unsigned char defend = 1; /* tbd */
if(defend) {
if(netif->autoip->lastconflict > 0) {
/* retreat, there was a conflicting ARP in the last
* DEFEND_INTERVAL seconds
*/
LWIP_DEBUGF(AUTOIP_DEBUG | LWIP_DBG_TRACE | LWIP_DBG_STATE,
("autoip_handle_arp_conflict(): we are defending, but in DEFEND_INTERVAL, retreating\n"));
/* TODO: close all TCP sessions */
autoip_restart(netif);
} else {
LWIP_DEBUGF(AUTOIP_DEBUG | LWIP_DBG_TRACE | LWIP_DBG_STATE,
("autoip_handle_arp_conflict(): we are defend, send ARP Announce\n"));
autoip_arp_announce(netif);
netif->autoip->lastconflict = DEFEND_INTERVAL * AUTOIP_TICKS_PER_SECOND;
}
} else {
LWIP_DEBUGF(AUTOIP_DEBUG | LWIP_DBG_TRACE | LWIP_DBG_STATE,
("autoip_handle_arp_conflict(): we do not defend, retreating\n"));
/* TODO: close all TCP sessions */
autoip_restart(netif);
}
}
/**
* Create an IP-Address out of range 169.254.1.0 to 169.254.254.255
*
* @param netif network interface on which create the IP-Address
* @param ipaddr ip address to initialize
*/
static void
autoip_create_addr(struct netif *netif, ip_addr_t *ipaddr)
{
/* Here we create an IP-Address out of range 169.254.1.0 to 169.254.254.255
* compliant to RFC 3927 Section 2.1
* We have 254 * 256 possibilities */
u32_t addr = ntohl(LWIP_AUTOIP_CREATE_SEED_ADDR(netif));
addr += netif->autoip->tried_llipaddr;
addr = AUTOIP_NET | (addr & 0xffff);
/* Now, 169.254.0.0 <= addr <= 169.254.255.255 */
if (addr < AUTOIP_RANGE_START) {
addr += AUTOIP_RANGE_END - AUTOIP_RANGE_START + 1;
}
if (addr > AUTOIP_RANGE_END) {
addr -= AUTOIP_RANGE_END - AUTOIP_RANGE_START + 1;
}
LWIP_ASSERT("AUTOIP address not in range", (addr >= AUTOIP_RANGE_START) &&
(addr <= AUTOIP_RANGE_END));
ip4_addr_set_u32(ipaddr, htonl(addr));
LWIP_DEBUGF(AUTOIP_DEBUG | LWIP_DBG_TRACE | LWIP_DBG_STATE,
("autoip_create_addr(): tried_llipaddr=%"U16_F", %"U16_F".%"U16_F".%"U16_F".%"U16_F"\n",
(u16_t)(netif->autoip->tried_llipaddr), ip4_addr1_16(ipaddr), ip4_addr2_16(ipaddr),
ip4_addr3_16(ipaddr), ip4_addr4_16(ipaddr)));
}
/**
* Sends an ARP probe from a network interface
*
* @param netif network interface used to send the probe
*/
static err_t
autoip_arp_probe(struct netif *netif)
{
return etharp_raw(netif, (struct eth_addr *)netif->hwaddr, ðbroadcast,
(struct eth_addr *)netif->hwaddr, IP_ADDR_ANY, ðzero,
&netif->autoip->llipaddr, ARP_REQUEST);
}
/**
* Sends an ARP announce from a network interface
*
* @param netif network interface used to send the announce
*/
static err_t
autoip_arp_announce(struct netif *netif)
{
return etharp_raw(netif, (struct eth_addr *)netif->hwaddr, ðbroadcast,
(struct eth_addr *)netif->hwaddr, &netif->autoip->llipaddr, ðzero,
&netif->autoip->llipaddr, ARP_REQUEST);
}
/**
* Configure interface for use with current LL IP-Address
*
* @param netif network interface to configure with current LL IP-Address
*/
static err_t
autoip_bind(struct netif *netif)
{
struct autoip *autoip = netif->autoip;
ip_addr_t sn_mask, gw_addr;
LWIP_DEBUGF(AUTOIP_DEBUG | LWIP_DBG_TRACE,
("autoip_bind(netif=%p) %c%c%"U16_F" %"U16_F".%"U16_F".%"U16_F".%"U16_F"\n",
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -