⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 tcp_impl.h

📁 NXPl788上lwip的无操作系统移植,基于Embest开发板
💻 H
📖 第 1 页 / 共 2 页
字号:
/*
 * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
 * All rights reserved. 
 * 
 * Redistribution and use in source and binary forms, with or without modification, 
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission. 
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
 * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
 * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
 * OF SUCH DAMAGE.
 *
 * This file is part of the lwIP TCP/IP stack.
 * 
 * Author: Adam Dunkels <adam@sics.se>
 *
 */
#ifndef __LWIP_TCP_IMPL_H__
#define __LWIP_TCP_IMPL_H__

#include "lwip/opt.h"

#if LWIP_TCP /* don't build if not configured for use in lwipopts.h */

#include "lwip/tcp.h"
#include "lwip/sys.h"
#include "lwip/mem.h"
#include "lwip/pbuf.h"
#include "lwip/ip.h"
#include "lwip/icmp.h"
#include "lwip/err.h"

#ifdef __cplusplus
extern "C" {
#endif

/* Functions for interfacing with TCP: */

/* Lower layer interface to TCP: */
#define tcp_init() /* Compatibility define, no init needed. */
void             tcp_tmr     (void);  /* Must be called every
                                         TCP_TMR_INTERVAL
                                         ms. (Typically 250 ms). */
/* It is also possible to call these two functions at the right
   intervals (instead of calling tcp_tmr()). */
void             tcp_slowtmr (void);
void             tcp_fasttmr (void);


/* Only used by IP to pass a TCP segment to TCP: */
void             tcp_input   (struct pbuf *p, struct netif *inp);
/* Used within the TCP code only: */
struct tcp_pcb * tcp_alloc   (u8_t prio);
void             tcp_abandon (struct tcp_pcb *pcb, int reset);
err_t            tcp_send_empty_ack(struct tcp_pcb *pcb);
void             tcp_rexmit  (struct tcp_pcb *pcb);
void             tcp_rexmit_rto  (struct tcp_pcb *pcb);
void             tcp_rexmit_fast (struct tcp_pcb *pcb);
u32_t            tcp_update_rcv_ann_wnd(struct tcp_pcb *pcb);

/**
 * This is the Nagle algorithm: try to combine user data to send as few TCP
 * segments as possible. Only send if
 * - no previously transmitted data on the connection remains unacknowledged or
 * - the TF_NODELAY flag is set (nagle algorithm turned off for this pcb) or
 * - the only unsent segment is at least pcb->mss bytes long (or there is more
 *   than one unsent segment - with lwIP, this can happen although unsent->len < mss)
 * - or if we are in fast-retransmit (TF_INFR)
 */
#define tcp_do_output_nagle(tpcb) ((((tpcb)->unacked == NULL) || \
                            ((tpcb)->flags & (TF_NODELAY | TF_INFR)) || \
                            (((tpcb)->unsent != NULL) && (((tpcb)->unsent->next != NULL) || \
                              ((tpcb)->unsent->len >= (tpcb)->mss))) \
                            ) ? 1 : 0)
#define tcp_output_nagle(tpcb) (tcp_do_output_nagle(tpcb) ? tcp_output(tpcb) : ERR_OK)


#define TCP_SEQ_LT(a,b)     ((s32_t)((a)-(b)) < 0)
#define TCP_SEQ_LEQ(a,b)    ((s32_t)((a)-(b)) <= 0)
#define TCP_SEQ_GT(a,b)     ((s32_t)((a)-(b)) > 0)
#define TCP_SEQ_GEQ(a,b)    ((s32_t)((a)-(b)) >= 0)
/* is b<=a<=c? */
#if 0 /* see bug #10548 */
#define TCP_SEQ_BETWEEN(a,b,c) ((c)-(b) >= (a)-(b))
#endif
#define TCP_SEQ_BETWEEN(a,b,c) (TCP_SEQ_GEQ(a,b) && TCP_SEQ_LEQ(a,c))
#define TCP_FIN 0x01U
#define TCP_SYN 0x02U
#define TCP_RST 0x04U
#define TCP_PSH 0x08U
#define TCP_ACK 0x10U
#define TCP_URG 0x20U
#define TCP_ECE 0x40U
#define TCP_CWR 0x80U

#define TCP_FLAGS 0x3fU

/* Length of the TCP header, excluding options. */
#define TCP_HLEN 20

#ifndef TCP_TMR_INTERVAL
#define TCP_TMR_INTERVAL       250  /* The TCP timer interval in milliseconds. */
#endif /* TCP_TMR_INTERVAL */

#ifndef TCP_FAST_INTERVAL
#define TCP_FAST_INTERVAL      TCP_TMR_INTERVAL /* the fine grained timeout in milliseconds */
#endif /* TCP_FAST_INTERVAL */

#ifndef TCP_SLOW_INTERVAL
#define TCP_SLOW_INTERVAL      (2*TCP_TMR_INTERVAL)  /* the coarse grained timeout in milliseconds */
#endif /* TCP_SLOW_INTERVAL */

#define TCP_FIN_WAIT_TIMEOUT 20000 /* milliseconds */
#define TCP_SYN_RCVD_TIMEOUT 20000 /* milliseconds */

#define TCP_OOSEQ_TIMEOUT        6U /* x RTO */

#ifndef TCP_MSL
#define TCP_MSL 60000UL /* The maximum segment lifetime in milliseconds */
#endif

/* Keepalive values, compliant with RFC 1122. Don't change this unless you know what you're doing */
#ifndef  TCP_KEEPIDLE_DEFAULT
#define  TCP_KEEPIDLE_DEFAULT     7200000UL /* Default KEEPALIVE timer in milliseconds */
#endif

#ifndef  TCP_KEEPINTVL_DEFAULT
#define  TCP_KEEPINTVL_DEFAULT    75000UL   /* Default Time between KEEPALIVE probes in milliseconds */
#endif

#ifndef  TCP_KEEPCNT_DEFAULT
#define  TCP_KEEPCNT_DEFAULT      9U        /* Default Counter for KEEPALIVE probes */
#endif

#define  TCP_MAXIDLE              TCP_KEEPCNT_DEFAULT * TCP_KEEPINTVL_DEFAULT  /* Maximum KEEPALIVE probe time */

/* Fields are (of course) in network byte order.
 * Some fields are converted to host byte order in tcp_input().
 */
#ifdef PACK_STRUCT_USE_INCLUDES
#  include "arch/bpstruct.h"
#endif
PACK_STRUCT_BEGIN
struct tcp_hdr {
  PACK_STRUCT_FIELD(u16_t src);
  PACK_STRUCT_FIELD(u16_t dest);
  PACK_STRUCT_FIELD(u32_t seqno);
  PACK_STRUCT_FIELD(u32_t ackno);
  PACK_STRUCT_FIELD(u16_t _hdrlen_rsvd_flags);
  PACK_STRUCT_FIELD(u16_t wnd);
  PACK_STRUCT_FIELD(u16_t chksum);
  PACK_STRUCT_FIELD(u16_t urgp);
} PACK_STRUCT_STRUCT;
PACK_STRUCT_END
#ifdef PACK_STRUCT_USE_INCLUDES
#  include "arch/epstruct.h"
#endif

#define TCPH_OFFSET(phdr) (ntohs((phdr)->_hdrlen_rsvd_flags) >> 8)
#define TCPH_HDRLEN(phdr) (ntohs((phdr)->_hdrlen_rsvd_flags) >> 12)
#define TCPH_FLAGS(phdr)  (ntohs((phdr)->_hdrlen_rsvd_flags) & TCP_FLAGS)

#define TCPH_OFFSET_SET(phdr, offset) (phdr)->_hdrlen_rsvd_flags = htons(((offset) << 8) | TCPH_FLAGS(phdr))
#define TCPH_HDRLEN_SET(phdr, len) (phdr)->_hdrlen_rsvd_flags = htons(((len) << 12) | TCPH_FLAGS(phdr))
#define TCPH_FLAGS_SET(phdr, flags) (phdr)->_hdrlen_rsvd_flags = (((phdr)->_hdrlen_rsvd_flags & PP_HTONS((u16_t)(~(u16_t)(TCP_FLAGS)))) | htons(flags))
#define TCPH_HDRLEN_FLAGS_SET(phdr, len, flags) (phdr)->_hdrlen_rsvd_flags = htons(((len) << 12) | (flags))

#define TCPH_SET_FLAG(phdr, flags ) (phdr)->_hdrlen_rsvd_flags = ((phdr)->_hdrlen_rsvd_flags | htons(flags))
#define TCPH_UNSET_FLAG(phdr, flags) (phdr)->_hdrlen_rsvd_flags = htons(ntohs((phdr)->_hdrlen_rsvd_flags) | (TCPH_FLAGS(phdr) & ~(flags)) )

#define TCP_TCPLEN(seg) ((seg)->len + ((TCPH_FLAGS((seg)->tcphdr) & (TCP_FIN | TCP_SYN)) != 0))

/** Flags used on input processing, not on pcb->flags
*/
#define TF_RESET     (u8_t)0x08U   /* Connection was reset. */
#define TF_CLOSED    (u8_t)0x10U   /* Connection was sucessfully closed. */
#define TF_GOT_FIN   (u8_t)0x20U   /* Connection was closed by the remote end. */


#if LWIP_EVENT_API

#define TCP_EVENT_ACCEPT(pcb,err,ret)    ret = lwip_tcp_event((pcb)->callback_arg, (pcb),\
                LWIP_EVENT_ACCEPT, NULL, 0, err)
#define TCP_EVENT_SENT(pcb,space,ret) ret = lwip_tcp_event((pcb)->callback_arg, (pcb),\
                   LWIP_EVENT_SENT, NULL, space, ERR_OK)
#define TCP_EVENT_RECV(pcb,p,err,ret) ret = lwip_tcp_event((pcb)->callback_arg, (pcb),\
                LWIP_EVENT_RECV, (p), 0, (err))
#define TCP_EVENT_CLOSED(pcb,ret) ret = lwip_tcp_event((pcb)->callback_arg, (pcb),\
                LWIP_EVENT_RECV, NULL, 0, ERR_OK)
#define TCP_EVENT_CONNECTED(pcb,err,ret) ret = lwip_tcp_event((pcb)->callback_arg, (pcb),\
                LWIP_EVENT_CONNECTED, NULL, 0, (err))
#define TCP_EVENT_POLL(pcb,ret)       ret = lwip_tcp_event((pcb)->callback_arg, (pcb),\
                LWIP_EVENT_POLL, NULL, 0, ERR_OK)
#define TCP_EVENT_ERR(errf,arg,err)  lwip_tcp_event((arg), NULL, \
                LWIP_EVENT_ERR, NULL, 0, (err))

#else /* LWIP_EVENT_API */

#define TCP_EVENT_ACCEPT(pcb,err,ret)                          \
  do {                                                         \
    if((pcb)->accept != NULL)                                  \
      (ret) = (pcb)->accept((pcb)->callback_arg,(pcb),(err));  \
    else (ret) = ERR_ARG;                                      \
  } while (0)

#define TCP_EVENT_SENT(pcb,space,ret)                          \
  do {                                                         \
    if((pcb)->sent != NULL)                                    \
      (ret) = (pcb)->sent((pcb)->callback_arg,(pcb),(space));  \
    else (ret) = ERR_OK;                                       \
  } while (0)

#define TCP_EVENT_RECV(pcb,p,err,ret)                          \
  do {                                                         \
    if((pcb)->recv != NULL) {                                  \
      (ret) = (pcb)->recv((pcb)->callback_arg,(pcb),(p),(err));\
    } else {                                                   \
      (ret) = tcp_recv_null(NULL, (pcb), (p), (err));          \
    }                                                          \
  } while (0)

#define TCP_EVENT_CLOSED(pcb,ret)                                \

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -