ftexampl20_2.htm

非常好的JAVASCRIPT树型

<DT><A NAME="1070"></A><B>Production wing valve</B>
<DT><A NAME="1092"></A><B>Protection structure</B>
<DT><A NAME="314"></A><B>Pulling tool</B>
<DT><A NAME="551"></A><B>Pump</B>
<DD>Equipment to circulate fluid.
<DT><A NAME="218"></A><B>Pump open plug</B>
<DT><A NAME="823"></A><B>Pump room</B>
<DT><A NAME="552"></A><B>Pumps, blenders, mixing equipment</B>
<DT><A NAME="248"></A><B>Pup joint</B>
<DT><A NAME="842"></A><B>Quantity of material</B>
<DT><A NAME="329"></A><B>Quick lock connection</B>
<DT><A NAME="829"></A><B>Radio room</B>
<DT><A NAME="249"></A><B>Radioactive sub</B>
<DT><A NAME="298"></A><B>Rebel tool</B>
<DT><A NAME="12"></A><B>Reel</B>
<DD>Drum on which is spooled the coiled tubing. On a 72x72 inches drum, up to 17000 ft of 1.5"" coiled tubing can be spooled.
<DT><A NAME="408"></A><B>Remote control panel</B>
<DT><A NAME="100"></A><B>Remote operated vehicle</B>
<DT><A NAME="1058"></A><B>Remotely operated running tool</B>
<DT><A NAME="641"></A><B>Replacement part</B>
<DT><A NAME="1062"></A><B>Retainer valve</B>
<DT><A NAME="281"></A><B>Retrievable packer</B>
<DT><A NAME="180"></A><B>Reverse circulating valve</B>
<DT><A NAME="976"></A><B>Rheometer</B>
<DD>Apparatus to measure the rheology of a fluid.
<DT><A NAME="695"></A><B>Rig</B>
<DD>Equipment and machinery assembled primarily for the purpose of drilling or boring a hole in the ground.
<DT><A NAME="101"></A><B>Rig camera</B>
<DT><A NAME="20"></A><B>Rig service</B>
<DT><A NAME="455"></A><B>Riser</B>
<DT><A NAME="71"></A><B>Riser handling equipment</B>
<DD>Located on derrick/drillfloor
<DT><A NAME="147"></A><B>Riser section</B>
<DT><A NAME="1067"></A><B>Riser slick joint</B>
<DT><A NAME="458"></A><B>Riser support ring</B>
<DT><A NAME="779"></A><B>Riser system</B>
<DD>Slip joint, ball joint, choke/kill line, booster line, lubricator.
<DT><A NAME="78"></A><B>Riser tensioner</B>
<DT><A NAME="308"></A><B>Roller reamer</B>
<DT><A NAME="319"></A><B>Rope socket</B>
<DT><A NAME="38"></A><B>Rotary table</B>
<DD>Rotary chain, kelly bushing, bowe adaptor, master bushing.
<DT><A NAME="286"></A><B>Rotating liner hanger</B>
<DT><A NAME="737"></A><B>Rubber</B>
<DT><A NAME="388"></A><B>Running tool</B>
<DT><A NAME="346"></A><B>Safety joint</B>
<DT><A NAME="167"></A><B>Safety joint</B>
<DT><A NAME="178"></A><B>Safety valve</B>
<DT><A NAME="169"></A><B>Sampler</B>
<DT><A NAME="981"></A><B>Sampling bottle</B>
<DD>Sampling bottle used in production services.
<DT><A NAME="736"></A><B>Sand</B>
<DT><A NAME="55"></A><B>Sand trap</B>
<DT><A NAME="558"></A><B>Saturation logging tool</B>
<DT><A NAME="983"></A><B>Saver sub</B>
<DD>Device made in the drill stem to absorb much of the wear between frequently broken joints.
<DT><A NAME="29"></A><B>Scaffolding</B>
<DT><A NAME="735"></A><B>Scale</B>
<DT><A NAME="15"></A><B>SCR power supply</B>
<DT><A NAME="22"></A><B>Sea water supply</B>
<DT><A NAME="431"></A><B>Seal assembly</B>
<DT><A NAME="984"></A><B>Seal bore extension</B>
<DD>Piece of pipe with polished interior positioned at the lower end of a packer on which the DST string stinger will seal, allowing tubing string vertical movement while insuring good seal between the inside of the tubing and the annulus tubing/casing.
<DT><A NAME="985"></A><B>Sealing bore</B>
<DT><A NAME="192"></A><B>Separator</B>
<DD>Separator used in testing and production services
<DT><A NAME="825"></A><B>Service control room</B>
<DT><A NAME="788"></A><B>Service equipment</B>
<DT><A NAME="311"></A><B>Setting tool</B>
<DT><A NAME="64"></A><B>Shaker discharge line</B>
<DT><A NAME="777"></A><B>Shallow gas stack</B>
<DD>Hydraulic latch
<DT><A NAME="392"></A><B>Shifting tool</B>
<DT><A NAME="943"></A><B>Shock jar</B>
<DD>Percussion tool to deliver a heavy downward blow to fish stuck in the borehole.
<DT><A NAME="341"></A><B>Shoe track</B>
<DT><A NAME="342"></A><B>Side pocket mandrel</B>
<DT><A NAME="222"></A><B>Side pocket valve</B>
<DT><A NAME="561"></A><B>Side wall coring tool</B>
<DT><A NAME="267"></A><B>Single control line</B>
<DT><A NAME="265"></A><B>Single encapsulated control line</B>
<DT><A NAME="562"></A><B>Slick line</B>
<DT><A NAME="995"></A><B>Sliding sleeve</B>
<DD>Special device placed in a tubing string that can be operated by a wireline tool or fluid pressure to open or close orifices to permit circulation between tubing and annulus.
<DT><A NAME="343"></A><B>Sliding sleeve door</B>
<DT><A NAME="166"></A><B>Slip joint</B>
<DD>Variable length tubular, part of the production or the DST string, used to compensate for string length variation due to pressure and temperature changes.
<DT><A NAME="762"></A><B>Slips and spiders</B>
<DD>Drillcollar safety clamp
<DT><A NAME="642"></A><B>Slop</B>
<DT><A NAME="250"></A><B>Slotted joint</B>
<DT><A NAME="997"></A><B>Slotted liner</B>
<DD>Liner used in gravel pack completion to contain the gravel placed between the formation and the well bore.
<DT><A NAME="563"></A><B>Slurrification unit</B>
<DT><A NAME="643"></A><B>Slurry</B>
<DT><A NAME="712"></A><B>Snubbing string</B>
<DT><A NAME="565"></A><B>Snubbing unit</B>
<DT><A NAME="998"></A><B>Solids control equipment</B>
<DD>Generic equipment for solids control. Used to removed undesirable solids of the mud.
<DT><A NAME="644"></A><B>Spacer</B>
<DT><A NAME="325"></A><B>Spang jar</B>
<DT><A NAME="323"></A><B>Spring jar</B>
<DT><A NAME="785"></A><B>Stabilizer</B>
<DD>A drill string component with bladed section which is of a larger diameter than its body or drill string component with bladed section which can be attached to the body of another drill string component.
<DT><A NAME="566"></A><B>Stand</B>
<DT><A NAME="223"></A><B>Standing valve</B>
<DT><A NAME="61"></A><B>Standpipe manifold</B>
<DT><A NAME="195"></A><B>Steam generator</B>
<DT><A NAME="203"></A><B>Steam heat exchanger</B>
<DT><A NAME="1001"></A><B>Stinger</B>
<DD>Cylindrical or tubular projection, relatively small in diameter, that extends below a downhole tool (or a string) and help guide the tool (or the string) into its designated position.
<DT><A NAME="94"></A><B>Stock tank</B>
<DT><A NAME="226"></A><B>Straddle / pack off tool</B>
<DT><A NAME="10"></A><B>Stripper</B>
<DT><A NAME="611"></A><B>Stuck point</B>
<DT><A NAME="809"></A><B>Sub-sea</B>
<DT><A NAME="452"></A><B>Sub-sea divertor stack</B>
<DT><A NAME="98"></A><B>Sub-sea equipment</B>
<DT><A NAME="179"></A><B>Sub-sea lubricator valve</B>
<DT><A NAME="165"></A><B>Sub-sea tree</B>
<DT><A NAME="123"></A><B>Sub-sea wireline blow out preventer</B>
<DT><A NAME="612"></A><B>Subjective evaluation</B>
<DT><A NAME="454"></A><B>Submarine pinger</B>
<DT><A NAME="901"></A><B>Subs</B>
<DD>A variety of tubular components used in a drill string assembly such as cross-over, bent, bit saver, UBHO and so on.
<DT><A NAME="784"></A><B>Subs and lift plugs</B>
<DT><A NAME="1100"></A><B>Subsea control module</B>
<DT><A NAME="1006"></A><B>Subsea head</B>
<DD>Set of equipment items mounted on the sea floor including casing heads which provides hydrocarbon flow path and connections to various production equipments.
<DT><A NAME="804"></A><B>Subsea inspection system</B>
<DD>ROV, SSTV, underwater camera equipment, subsea television plant.
<DT><A NAME="1052"></A><B>Subsea running tools</B>
<DT><A NAME="1061"></A><B>Subsea test tree</B>
<DT><A NAME="1060"></A><B>Subsea workover system</B>
<DT><A NAME="567"></A><B>Surface</B>
<DT><A NAME="219"></A><B>Surface controlled sub sea shut off valve</B>
<DT><A NAME="264"></A><B>Surface controlled sub sea shut off valve control line</B>
<DT><A NAME="220"></A><B>Surface controlled sub sea shut off valve dummy pack off</B>
<DT><A NAME="340"></A><B>Surface controlled sub sea shut off valve nipple</B>
<DT><A NAME="221"></A><B>Surface controlled sub sea shut off valve plug</B>
<DT><A NAME="510"></A><B>Surface cutting tool</B>
<DT><A NAME="2"></A><B>Surface equipment</B>
<DT><A NAME="1068"></A><B>Surface flow tree</B>
<DT><A NAME="1010"></A><B>Surface sensor</B>
<DD>Surface sensor on drilling structure.
<DT><A NAME="87"></A><B>Surface test tree</B>
<DT><A NAME="197"></A><B>Surge tank</B>
<DT><A NAME="299"></A><B>Survey barrel</B>
<DT><A NAME="375"></A><B>Swage</B>
<DT><A NAME="726"></A><B>Swarf</B>
<DT><A NAME="320"></A><B>Swivel</B>
<DT><A NAME="40"></A><B>Swivel</B>
<DT><A NAME="206"></A><B>Swivel flow sub</B>
<DT><A NAME="1044"></A><B>Tail cement</B>
<DT><A NAME="572"></A><B>Tank/pit</B>
<DD>Material Container
<DT><A NAME="386"></A><B>Tar baby</B>
<DT><A NAME="347"></A><B>Telescopic joint</B>
<DT><A NAME="573"></A><B>Temperature logging tool</B>
<DT><A NAME="844"></A><B>Temperature v time</B>
<DT><A NAME="1078"></A><B>Template</B>
<DT><A NAME="1072"></A><B>Tension frame</B>
<DT><A NAME="749"></A><B>Tensioning system</B>
<DD>Guide line tensioners, pod line tensioner.
<DT><A NAME="91"></A><B>Test choke manifold</B>
<DT><A NAME="176"></A><B>Tester valve</B>
<DT><A NAME="28"></A><B>Thruster</B>
<DD>*?service
<DT><A NAME="282"></A><B>Tie back packer</B>
<DT><A NAME="717"></A><B>Tie back string</B>
<DT><A NAME="39"></A><B>Top drive</B>
<DD>DDM **???, derrick drilling machine.
<DT><A NAME="77"></A><B>Tow line</B>
<DT><A NAME="19"></A><B>Towing bridle</B>
<DD>*move or delete
<DT><A NAME="86"></A><B>Transfer pump</B>
<DT><A NAME="575"></A><B>Transporter</B>
<DT><A NAME="44"></A><B>Travelling block</B>
<DD>Block dolly, guide dolly, hook for drillstring.
<DT><A NAME="1057"></A><B>Tree cap running tool</B>
<DT><A NAME="1055"></A><B>Tree running tool</B>
<DT><A NAME="62"></A><B>Trip tank</B>
<DT><A NAME="63"></A><B>Trip tank pump</B>
<DT><A NAME="1084"></A><B>Triple porch</B>
<DT><A NAME="1018"></A><B>Tubing anchor</B>
<DT><A NAME="448"></A><B>Tubing bonnet</B>
<DT><A NAME="1020"></A><B>Tubing end locator</B>
<DD>Tool used to indicate the bottom end of the tubing. Some tools have a spring loaded finger that pops out when the tool reaches the bottom end of the string. An overpull above normal line tension when pulling back up will indicate the bottom of string.
<DT><A NAME="434"></A><B>Tubing hanger</B>
<DT><A NAME="1056"></A><B>Tubing hanger running tool</B>
<DT><A NAME="443"></A><B>Tubing head spool</B>
<DT><A NAME="365"></A><B>Tubing punch</B>
<DT><A NAME="1021"></A><B>Tubing seat locator</B>
<DD>Oversize tubing string component which seats the tubing string on the packer. This is used to locate the top of the packer.
<DT><A NAME="730"></A><B>Tubular</B>
<DD>Any type of tubular equipment used in oil and gas exploration and production.
<DT><A NAME="232"></A><B>Tubular conveyed gun release</B>
<DT><A NAME="173"></A><B>Tubular conveyed perforator gun</B>
<DD>Perforating gun conveyed by the tubing (as opposed to wireline) used for high shot density, also called TCP. Tool used in perforating casing/borehole in order to complete the well and put it in production.
<DT><A NAME="362"></A><B>Tubular cutting tool</B>
<DT><A NAME="72"></A><B>Tubular handling equipment</B>
<DD>Located on derrick/drillfloor
<DT><A NAME="324"></A><B>Tubular jar</B>
<DT><A NAME="227"></A><B>Tubular retrievable safety valve</B>
<DT><A NAME="845"></A><B>Tubular size</B>
<DT><A NAME="300"></A><B>Turbine</B>
<DT><A NAME="841"></A><B>Type of material</B>
<DT><A NAME="729"></A><B>Type of tubular</B>
<DT><A NAME="302"></A><B>Under reamer</B>
<DD>A rotating finishing tool with cutting edges used to enlarge or shape or regulate a hole.
<DT><A NAME="1054"></A><B>Universal running tool</B>
<DT><A NAME="406"></A><B>Upper annular</B>
<DT><A NAME="463"></A><B>Upper stress joint</B>
<DT><A NAME="132"></A><B>Upper stress joint</B>
<DT><A NAME="800"></A><B>Utility winch</B>
<DT><A NAME="816"></A><B>V doors</B>
<DT><A NAME="576"></A><B>Valve</B>
<DD>Also subsea and downhole.
<DT><A NAME="301"></A><B>Variable blade stabilizer</B>
<DT><A NAME="759"></A><B>Vertical pipe handling system</B>
<DD>Racking arms, stand lift arm stabber grabber, stabbins board, fingerboard retractor system, horizontal to vertical system.
<DT><A NAME="716"></A><B>Vessel</B>
<DT><A NAME="615"></A><B>Vol, pressure v time</B>
<DT><A NAME="646"></A><B>Water</B>
<DT><A NAME="425"></A><B>Wear bushing</B>
<DT><A NAME="330"></A><B>Weighted bar</B>
<DT><A NAME="734"></A><B>Well completion</B>
<DT><A NAME="1026"></A><B>Well completion segment</B>
<DT><A NAME="1040"></A><B>Well data</B>
<DT><A NAME="810"></A><B>Wellbore</B>
<DD>*Is this different to downhole? No.
<DT><A NAME="682"></A><B>Wellbore</B>
<DT><A NAME="733"></A><B>Wellbore depth</B>
<DT><A NAME="647"></A><B>Wellbore fluid</B>
<DT><A NAME="108"></A><B>Wellhead connector</B>
<DT><A NAME="838"></A><B>Wellhead deck</B>
<DT><A NAME="419"></A><B>Wellhead equipment</B>
<DD>All equipment below top of wellhead is considered downhole.
<DT><A NAME="803"></A><B>Wellhead/subsea run/test</B>
<DD>Hang off tools, wedgelock running/retrieving tools, tools for repair/maintenance of subsea installations.
<DT><A NAME="727"></A><B>Whipstock</B>
<DT><A NAME="138"></A><B>Winch</B>
<DT><A NAME="1096"></A><B>Wing hub protection roof</B>
<DT><A NAME="582"></A><B>Wire line</B>
<DT><A NAME="583"></A><B>Wire line unit</B>
<DT><A NAME="140"></A><B>Wireline blow out preventer</B>
<DT><A NAME="1036"></A><B>Wireline entry guide</B>
<DD>Guide positioned at the end of a production tubing to avoid wireline tool to get stuck when pulled up through the tubing.
<DT><A NAME="380"></A><B>Wireline finder</B>
<DT><A NAME="381"></A><B>Wireline grab</B>
<DT><A NAME="142"></A><B>Wireline mast</B>
<DT><A NAME="383"></A><B>Wireline spear</B>
<DT><A NAME="318"></A><B>Wireline toolstring</B>
<DT><A NAME="751"></A><B>Wirelines</B>
<DD>Counter, sinker bar, guide lines drill lines, sandline.
<DT><A NAME="1077"></A><B>Workover control station</B>
<DT><A NAME="1065"></A><B>Workover riser</B>
<DT><A NAME="1066"></A><B>Workover riser spider</B>
<DT><A NAME="1099"></A><B>Xmas tree</B>
<DT><A NAME="444"></A><B>Xmas tree</B>
<DT><A NAME="1053"></A><B>Xmas tree running tool</B>
<DT><A NAME="1074"></A><B>Xmas tree string umbilical system</B>
<DT><A NAME="1076"></A><B>Xmas tree umbilical winch</B>
<DT><A NAME="414"></A><B>Yellow pod</B>
</DL><CENTER>
</BODY>
</HTML>