msp430x54x_tb_02.c

来自「MSP430的开发程序的例子+中文注释」· C语言 代码 · 共 43 行

//******************************************************************************
//  msp430FG5438 Demo - Timer_B, Toggle P1.0, CCR0 Up Mode ISR, DCO SMCLK
//
//  Description: Toggle P1.0 using software and TB_0 ISR. Timer_B is
//  configured for up mode, thus the timer overflows when TBR counts
//  to CCR0. In this example, CCR0 is loaded with 20000.
//  ACLK = n/a, MCLK = SMCLK = TBCLK = default DCO ~1.045MHz
//
//           msp430FG5438
//         ---------------
//     /|\|               |
//      | |               |
//      --|RST            |
//        |               |
//        |           P1.0|-->LED
//
//   M Smertneck
//   Texas Instruments Inc.
//   April 2008
//   Built with CCEv3.2 IAR Embedded Workbench Version: 3.42A
//******************************************************************************

#include <msp430x54x.h>

void main(void)
{
  WDTCTL = WDTPW + WDTHOLD;                 // Stop WDT
  P1DIR |= 0x01;                            // Set P1.0 to output direction
  TBCCTL0 = CCIE;                           // TBCCR0 interrupt enabled
  TBCCR0 = 20000;
  TBCTL = TBSSEL_2 + MC_1;                  // SMCLK, upmode

  _BIS_SR(LPM0_bits + GIE);                 // Enter LPM0 w/ interrupt
}

// Timer B0 interrupt service routine
#pragma vector=TIMERB0_VECTOR
__interrupt void Timer_B (void)
{
  P1OUT ^= 0x01;                            // Toggle P1.0 using exclusive-OR
}