msp430x54x_ta_05.c

来自「MSP430的开发程序的例子+中文注释」· C语言 代码 · 共 45 行

//******************************************************************************
//  msp430FG5438 Demo - Timer_A, Toggle P1.0, CCR0 Up Mode ISR, 32kHz ACLK
//
//  Description: Toggle P1.0 using software and the TA_0 ISR. Timer_A is
//  configured for up mode, thus the timer overflows when TAR counts
//  to CCR0. In this example, CCR0 is loaded with 1000-1.
//  Toggle rate = 32768/(2*1000) = 16.384
//  ACLK = TACLK = 32768Hz, MCLK = SMCLK = default DCO ~1.045MHz
//  //* An external watch crystal on XIN XOUT is required for ACLK *//	
//
//           msp430FG5438
//         ---------------
//     /|\|               |
//      | |               |
//      --|RST            |
//        |               |
//        |           P1.0|-->LED
//
//   M Smertneck
//   Texas Instruments Inc.
//   April 2008
//   Built with CCEv3.2 IAR Embedded Workbench Version: 3.42A
//******************************************************************************

#include <msp430x54x.h>

void main(void)
{
  WDTCTL = WDTPW + WDTHOLD;             // Stop WDT
  P1DIR |= 0x01;                        // P1.0 output
  TA0CCTL0 = CCIE;                      // CCR0 interrupt enabled
  TA0CCR0 = 1000-1;
  TA0CTL = TASSEL_1 + MC_1;             // ACLK, upmode

  _BIS_SR(LPM3_bits + GIE);             // Enter LPM3 w/ interrupt
}

// Timer A0 interrupt service routine
#pragma vector=TIMER0_A0_VECTOR
__interrupt void Timer_A (void)
{
  P1OUT ^= 0x01;                        // Toggle P1.0
}