tooltip.js.svn-base

asterisk-gui asterisk网关接口编程 控制asterisk的接口

	tooltips['options']= new Object;
	tooltips['options'].en = new Array;
	tooltips['options'].en[0] = "<B>Current Password:</B> Please enter your existing password";
	tooltips['options'].en[1] = "<B>New Password:</B> Enter the New Password";
	tooltips['options'].en[2] = "<B>Retype New Password:</B> Retype New Password ";
	tooltips['options'].en[3] = "<B>Bind Address:</B> The IP address to which the GUI will be assigned to.";
	tooltips['options'].en[4] = "<B>Port:</B> GUI port. Must be specified in browser while accessing the GUI";
	tooltips['options'].en[5] = "<B>HTTP Timeout:</B> Session time out in seconds";


	// Tooltips for status(status)
	tooltips['status']= new Object;
	tooltips['status'].en = new Array;
	tooltips['status'].en[0] = "<B>List of active channels:</B> Shows the list of active channels ";
	tooltips['status'].en[1] = "<B>Refresh:</B> Refresh the list of active channels";
	tooltips['status'].en[2] = "<B>Transfer:</B> Transfer selected channel";
	tooltips['status'].en[3] = "<B>Hangup:</B> Hangup selected Channel";

	// Tooltips for Service Providers (trunks)
	tooltips['trunks']= new Object;
	tooltips['trunks'].en = new Array;
	tooltips['trunks'].en[0] = "<B>Analog/Voip Trunks:</B> Analog lines are attached to analog interfaces of the PBX using FXO cards. Voice over IP (VoIP) connections are provided by an Internet Telephony Service Provider (ITSP).";
	tooltips['trunks'].en[1] = "<B>Provider:</B> Please select provider of your voice transport service.";
	tooltips['trunks'].en[2] = "<B>Lines:</B> Individual lines of the PBX Ex: Analog Port #3: The third analog port of the PBX.";
	tooltips['trunks'].en[3] = "<B>Username:</B> The username for your account with the provider - please contact your provider if you do not know it.";
	tooltips['trunks'].en[4] = "<B>Password:</B> The password for your account with the provider - please contact your provider if you do not know it.";
	tooltips['trunks'].en[5] = "<B>Digital Cards:</B> Digital Card trunking setup includes TExxxx based cards. Anything that is based from zaptel.conf and zapata.conf is readily availible to be configured as a trunk.";
	tooltips['trunks'].en[6] = "<B>Provider:</B> Digium Certified Internet Service Providers. Custom integrated into the GUI for simple setup";
	tooltips['trunks'].en[7] = "<B>Ngt Host:</B> This is the IP of the SIP server provided by NGT for your specific user account.";

	// Tooltips for Voicemenus (menus)
	tooltips['menus']= new Object;
	tooltips['menus'].en = new Array;
	tooltips['menus'].en[0] = "<B>Name:</B> A name for the Voice Menu";
	tooltips['menus'].en[1] = "<B>Steps:</B> A listing of the actions performed when a call enters the menu.";
	tooltips['menus'].en[2] = "<B>Add a new step:</B>Add additional steps performed during the menu.";
	tooltips['menus'].en[3] = "<B>Dial other Extensions:</B>Is the caller allowed to dial extensions other than the ones defined below?";
	tooltips['menus'].en[4] = "<B>Keypress Events:</B>Define the actions that occur when a user presses the corresponding digit.";
	tooltips['menus'].en[5] = "<B>Extension(optional):</B> If you want this Voicemenu to be accessible by dialing an extension, then enter that extension number";
	tooltips['menus'].en[6] = "<B>t</B> On Time out";
	tooltips['menus'].en[7] = "<B>i</B> On Invalid Input";
	
	// Tooltips for Calling Rules  (numberplan)
	tooltips['callingrules']= new Object;
	tooltips['callingrules'].en = new Array;
	tooltips['callingrules'].en[0] = "<B>new:</B> Add a new DialPlan. A DialPlan is a set of calling rules that can be assigned to one or more User Extensions.";
	tooltips['callingrules'].en[1] = "<B>delete:</B> Delete the selected DialPlan.";
	tooltips['callingrules'].en[2] = "<B>Edit:</B> Edit the selected Calling Rule.";
	tooltips['callingrules'].en[3] = "<B>Delete:</B> Delete the selected Calling Rule.";
	tooltips['callingrules'].en[4] = "<B>Add a Calling Rule:</B> Add new 'Calling Rule' to the selected DialPlan. A DialPlan is a set of calling rules, that can be assigned to one or more User Extensions.";
	tooltips['callingrules'].en[5] = "<B>Rule Name:</B> A name for this Calling Rule. Ex: 'Local' or 'Long Distance' etc.";
	tooltips['callingrules'].en[6] = "Select a Service Provider through which this call should be placed.";
	tooltips['callingrules'].en[7] = "<B>Dialing Rules:</B> Ex: If the number begins with <I>'256'</I> and followed by <I>7</I> digits <i>or more</I>";
	tooltips['callingrules'].en[8] = "<B>Custom Pattern:</B> Ex:  _91NXXNXXXXXX ";
	tooltips['callingrules'].en[9] = "Ex: Strip <i>1</i> digits from the front and prepend <i>256</i> before dialing";
	tooltips['callingrules'].en[10] = "Parked Calls: Check if you want to be able to access the parking lot from this Number Plan";

	// Tooltips for Incoming Calls (incoming)
	tooltips['incoming']= new Object;
	tooltips['incoming'].en = new Array;
	tooltips['incoming'].en[0] = "<B>Add a Incoming Rule:</B> Define a new Rule for handling Incoming calls based on service provider and/or the number called.";
	tooltips['incoming'].en[1] = "<B>Pattern:</B> Pattern of the DID number, <i>not</I> the pattern for the CID (caller id number)";


	// Tooltips for Record a Menu (record)
	tooltips['record']= new Object;
	tooltips['record'].en = new Array;
	tooltips['record'].en[0] = "<B>Record a new Voice Menu:</B> Lets you record a new voice menu using any user extension device";
	tooltips['record'].en[1] = "<B>Filename:</B> File name under which the recorded file should be saved to. Ex: MainGreeting ";
	tooltips['record'].en[2] = "<B>Extension used for recording:</B> Select a device through which this voice menu will be recorded.";


	// Tooltips for System Information  (sysinfo)
	tooltips['sysinfo']= new Object;
	tooltips['sysinfo'].en = new Array;
	tooltips['sysinfo'].en[0] = "<B>General:</B> Information about OS, Uptime, Asterisk, Date, Timezone and Hostname";
	tooltips['sysinfo'].en[1] = "<B>ifconfig:</B> Network devices information (ifconfig)";
	tooltips['sysinfo'].en[2] = "<B>Resources:</B> Disk and Memory usage information";
	tooltips['sysinfo'].en[3] = "<B>Logs:</B> Asterisk Log files";

	tooltips['graph']= new Object;
	tooltips['graph'].en = new Array;
	tooltips['graph'].en[0] = "<B>CPU Usage:</B> Real-Time Updating Graph For CPU Usage";


//	Tooltips for http_options.html in english
	tooltips['http_options']= new Object;
	tooltips['http_options'].en = new Array;

	tooltips['http_options'].en[0] = "" ;
	tooltips['http_options'].en[1] = "<B>Bind IP:</B> GUI will be available only on this IP address, if not sure please enter the LAN IP address. If you want the GUI to be available on all interfaces - enter 0.0.0.0" ;
	tooltips['http_options'].en[2] = "<B>Port:</B> Please enter the port number on which you want to access the GUI." ;


// 	Tooltips for the CDR reader page.
	tooltips['cdr'] = new Object;
	tooltips['cdr'].en = new Array;
	tooltips['cdr'].en[0] = "<B>View:</B> Select how many call detail records to read at once.." ;

//	Tooltips for the Digital Card page.
	tooltips['digital'] = new Object;
	tooltips['digital'].en = new Array;
	tooltips['digital'].en[0] = "<B>Framing/Coding:</B> To see this requires rev: 2986 of the 1.4 branch of zaptel.";
	tooltips['digital'].en[1] = "<B>Line Build Out:</B> To see this requires rev: 2986 of the 1.4 branch of zaptel.";
	tooltips['digital'].en['Out Of Alarm:'] = "<B>Alarm:</B>This setting allows the user to see if the span is currently in the alarm state of 'OK' and useable";
	tooltips['digital'].en['Alarms:'] = "<B>Alarms:</B>This allows the user to see the currently alarm status of the span";
	tooltips['digital'].en['Card Description:'] = "<B>Card Description:</B> This allows the user to check the description of the Digital Card.<br>(Often times will display the card type (4xx,2xx,1xx))";
	tooltips['digital'].en['Card Name:'] = "<B>Card Name:</B> Official name of the card, often displaying the total spans, card number, and current span.";
	tooltips['digital'].en['Total Channels:'] = "<B>Total Channels:</B> This is the count of the TOTAL channels availible on a particular span, not just the configured ones.";
	tooltips['digital'].en['Framing/Coding:'] = "<B>Framing/Coding:</B> Drop down box for enabling the changing of Framing/Coding. The first option is your current Framing/Coding";
	tooltips['digital'].en['Line Build Out:'] = "<B>Line Build Out:</B> The current LBO (Line Build Out) of the span.";
	tooltips['digital'].en['Sync Source:'] = "<B>Sync Source:</B> Your Zaptel Sync Source. Can be one of any spans, or 0 for non master";
	tooltips['digital'].en['Options:'] = "<B>Options:</B> Span Related Options, including Signalling, Switchtype, Channels, etc";