makefile

在PXA270上的IO驱动

CC = /opt/xscalev1/bin/arm-linux-gcc
INCLUDEDIR = /XSBase270/2.4/Kernel/xsbase/linux-2.4.21-emdoor_EDR/include
CFLAGS = -D__KERNEL__ -DMODULE
CFLAGS += -I.. -I$(INCLUDEDIR)

APP_INCLUDEDIR = /opt/xscalev1/arm-linux/include
APP_CFLAGS = -I.. -I$(APP_INCLUDEDIR)


#8LED
TARGET_8LED = XSB_EDR_8LED
OBJ_8LED = $(TARGET_8LED).o
SOURCE_8LED = $(TARGET_8LED).c

OBJ_8LED_TEST = $(TARGET_8LED)_test
SOURCE_8LED_TEST = $(TARGET_8LED)_test.c


#8SEG
TARGET_8SEG = XSB_EDR_8SEG
OBJ_8SEG = $(TARGET_8SEG).o
SOURCE_8SEG = $(TARGET_8SEG).c

OBJ_8SEG_TEST = $(TARGET_8SEG)_test
SOURCE_8SEG_TEST = $(TARGET_8SEG)_test.c


#STEP
TARGET_STEP = XSB_EDR_STEP
OBJ_STEP = $(TARGET_STEP).o
SOURCE_STEP = $(TARGET_STEP).c

OBJ_STEP_TEST = $(TARGET_STEP)_test
SOURCE_STEP_TEST = $(TARGET_STEP)_test.c

#KEYPAD
TARGET_KEYPAD = XSB_EDR_KEYPAD
OBJ_KEYPAD = $(TARGET_KEYPAD).o
SOURCE_KEYPAD = $(TARGET_KEYPAD).c

OBJ_KEYPAD_TEST = $(TARGET_KEYPAD)_test
SOURCE_KEYPAD_TEST = $(TARGET_KEYPAD)_test.c


ALL: $(OBJ_8LED) $(OBJ_8LED_TEST) $(OBJ_8SEG) $(OBJ_8SEG_TEST) $(OBJ_STEP) $(OBJ_STEP_TEST) $(OBJ_STEP_TEST) $(OBJ_KEYPAD) $(OBJ_KEYPAD_TEST) 

$(OBJ_8LED): $(SOURCE_8LED)
	$(CC) $(CFLAGS) -c -o $(OBJ_8LED) $(SOURCE_8LED)

$(OBJ_8LED_TEST): $(SOURCE_8LED_TEST)
	$(CC) $(APP_CFLAGS)  -o $(OBJ_8LED_TEST) $(SOURCE_8LED_TEST)


$(OBJ_8SEG): $(SOURCE_8SEG)
	$(CC) $(CFLAGS) -c -o $(OBJ_8SEG) $(SOURCE_8SEG)

$(OBJ_8SEG_TEST): $(SOURCE_8SEG_TEST)
	$(CC) $(APP_CFLAGS) -o $(OBJ_8SEG_TEST) $(SOURCE_8SEG_TEST)

$(OBJ_STEP): $(SOURCE_STEP)
	$(CC) $(CFLAGS) -c -o $(OBJ_STEP) $(SOURCE_STEP)

$(OBJ_STEP_TEST): $(SOURCE_STEP_TEST)
	$(CC) $(APP_CFLAGS) -o $(OBJ_STEP_TEST) $(SOURCE_STEP_TEST)

$(OBJ_KEYPAD): $(SOURCE_KEYPAD)
	$(CC) $(CFLAGS) -c -o  $(OBJ_KEYPAD) $(SOURCE_KEYPAD)

$(OBJ_KEYPAD_TEST): $(SOURCE_KEYPAD_TEST)
	$(CC) $(APP_CFLAGS) -o $(OBJ_KEYPAD_TEST) $(SOURCE_KEYPAD_TEST)
 
clean:
	rm -rf $(OBJ_8LED) $(OBJ_8LED_TEST) $(OBJ_8SEG) $(OBJ_8SEG_TEST) $(OBJ_STEP) $(OBJ_STEP_TEST) $(OBJ_KEYPAD) $(OBJ_KEYPAD_TEST)